Did they actually play the drums in drumline?
Nick Cannon did his own drumming on screen while his double, Jason Price, did majority of the close-ups with complex techniques.
What kind of microphone should you use to record a snare drum?
You want to use condenser microphones because they’re incredibly sensitive which is why the sound of your snare is captured very prominently by them.
How Many Mics does it take to record a snare?
Using Two Mics Can Work Well A lot of engineers are adamant about using two mics on a snare drum — one over, one under. The sound coming off the bottom of the snare drum is really the sound of the actual snares — the rattling wires that contact the bottom head — that give the drum its name.
What are pencil mics used for?
The term pencil microphone refers to a top-address microphone that is long and narrow with a small diaphragm. Pencil mics are typically condensers used as measurement and instruments mics or in any situations that need accurate audio.
Where do you put the snare bottom mic?
For the right balance, place the dynamic mic 1.5 inches above the head, 2 inches inside the rim of the snare, and at a 25 degrees inclination directed to the center of the head. If you desire a low-end sound, move the mic from the center of the head.
Do I need a drum tuner?
Drums aren’t tuned to a specific pitch, so many experienced drummers tune their drums by ear. However, if you’re a novice drummer, it’s worth investing in a drum tuner to help you out. De-tension the drum head. Drum sets typically have two types of heads—the batter head (top head) and the resonant head (bottom head).
What is the best snare drum for live recording?
The Shure SM57 is pretty much the de facto standard for snare in live and recording applications. While there are lots of new contenders, there’s something nice about the low-end punch that a 57 delivers courtesy of the proximity effect from its tight cardioid pattern that helps reject the hi-hat.
How to use a snare drum microphone properly?
A popular snare drum microphone position is to have the microphone hanging just over the edge and pointing at the center of the drumhead. If you have too much ring, raise the microphone up and away from the edge but still pointing at the center of the drum.
What determines the sound of a snare drum?
The two biggest factors in the snare sound are the most significant: (a) the player and (b) the snare drum itself. The player is probably the single biggest factor. I’ve heard drums that sounded terrible when I hit them turn to gold when a world-class player sat down to play. And the snare drum itself?
What frequency response should I use for snare drum?
(See frequency response chart.) And its designed rolloff on the bottom (below 200Hz, to minimize handling noise) means you may need to EQ in some real low end to compensate for it being down 10dB at 50Hz. The frequency response chart of the Shure SM57 shows the presence peak that makes it so popular for recording snare drum.