How do you make BBS of steel?
HOW TO CALCULATE THE QUANTITY OF STEEL IN COLUMN (BBS)
- We have a column.
- Height = 3 meter.
- Cross section = 500 x 400 mm.
- No of vertical bars = 6 nos.
- the diameter of the vertical bar = 16 mm.
- Diameter of stirrup = 8 mm.
- stirrups center to center spacing = @150 or @ 200 mm.
- The calculation was to proceed in two steps.
Is code for steel BBS?
8 IS 2502
List of Indian Standard Codes
S.No. | IS Code | For |
---|---|---|
7 | IS 1786 | Reinforcement Steel – HYSD Re bars =(Physical & Chemical Properties) |
8 | IS 2502 | BBS – Code for bending and fixing of bar reinforcement. |
9 | IS 13920 | Ductile detailing of reinforced concrete structures subjected to seismic forces |
10 | IS 4990 | Ply Boards for Shuttering Works |
What is BBS construction?
Bar Bending Schedule (BBS) helps to determine the quantity of steel required in construction of your house. This helps to get the accurate estimation of steel. Once the calculation of cutting and bending is done it reduces the wastage of steel and it becomes economic.
How do I make BBS in Excel?
Step by Step Preparation of Bar Bending Schedule:
- Step 1: Identification of Members (Steel Bars)
- Step 2: Count the Number of bars.
- Step 3: Calculate the length of Reinforcement bars.
- Step 4: Calculate the unit weight of Reinforcement Bar.
- Step 5: Calculate the Weight of particular Shape of Bar.
How do you test BBS of steel?
Basics of Bar Bending Schedule – BBS of Steel Reinforcement – YouTube
Which mm rod is used for pillar?
Iron rod size for 2 storey (G+1) building:– According to general thumb rule, we will assume a structure of G+1 (2 storey) residential building,using standard 9″ thick walls,we should use iron rod size of 10mm as mesh bar for footing, 6nos of 12mm size used for column, 4nos of 12mm size used for beam and 10mm & 8mm iron …
Is TMT code steel?
Tmt steel bar and HSN Code 7214 Export from India.
What is density of steel bar?
7850 kg/m^3
The density of steel rod is 7850 kg/m^3 , its mass is 5 kg .
What is cutting length in BBS?
How to Prepare Bar Bending Schedule:
BBS of Column | |
---|---|
Dia of Bar | 1. Main Bars = 16mm ; 2. Stirrups (Longitudinal bars) = 8mm |
No. of Bars used | 1. Main bars = 4 2. Stirrups = 30 |
Cutting length | 1. Main bars = 3.16m 2. Stirrups = 2.64m |
Total Length of bar | 1. Main bars = 18.4m 2. Stirrups = 43.2m |
What is the weight of steel bar?
Unit weight of steel is 7850 kg/m³.
What is bar bending?
Bar bending is the manufacture and bending of the steel reinforcing bars and beams, also known as rebar, used as reinforcement in concrete construction. Bar bending has a variety of different scientific measurements associated with it, often referred to as the bar bending schedule.
What is the format of BBS?
Bar Bending Schedule (BBS) is basically the representation of bend shapes and cut length of bars as per structure drawings. BBS is prepared from construction drawings. For each member separate BBS is prepared because bars are bended in various shapes depending on the shape of member.
What is LD in BBS?
Ld – Development Length which is equal to 40d. d – Diameter of Bar. So D = height of the bend bar (refer the image) “D” = Slab Thickness – (2 x clear cover) – (diameter of bar)
What is the minimum size of beam?
THE STANDARD SIZE OF THE BEAMS
In a residential building it is 9 ʺ × 12 ʺ or 225 mm × 300 mm standard size according to (IS codes). The minimum RCC beam size should not be less than 9 ʺ × 9 ʺ or 225mm × 225mm with the addition of a 125mm slab thickness.
Which steel is best for column?
10 Best Steel for House Construction | Best Steel Brand for House Construction In India | Best TMT bar In India | Best Steel In India19 min read
- Shyam Steel Industries Ltd.
- JSW Steel Ltd.
- Tata Steel Ltd.
- Steel Authority of India Limited (SAIL)
- Essar Steel.
- Jindal Steel.
- VISA Steel.
- SRMB Steel.
Is RCC a code?
Design of R.C.C beam as per Indian Standard code IS:456:2000.
What is TMT full form?
TMT stands for Thermo Mechanically Treated steel. QUOTE. Thermo mechanically treated steel known as TMT steel can be described as a new-generation-high-strength steel having superior properties such as weldability, strength, ductility and bendability meeting highest quality standards at international level.
What is unit of steel?
Unit mass of steel is the ratio of weight of Steel to its per unit volume. Usually it is expressed in kilograms per cubic metre or Pounds per cubic feet. Unit mass of steel is 7850 kg/m3 (kilograms per cubic metre) or 490 lbs/ft3 (pounds per cubic feet).
What is the weight of TMT bars?
Weight Chart of Tmt Bars per Bundle
TMT Steel Bar Size in mm | Length of TMT Steel Bar (Meter) | Total Weight of TMT Steel Bar bundle (Kg) |
---|---|---|
16 | 12 | 54.36 Kg |
20 | 12 | 57.6 Kg |
25 | 12 | 45 Kg |
28 | 12 | 56.4 Kg |
How do you calculate stirrups?
Important Basic Stirrups Length Calculation formulas: Perimeter of Rectangle (for Rectangular Stirrups) = 2 ( length + breadth) Perimeter of Square (for Square Stirrups) = 4 x side length. Perimeter of circle or Circumference of Circle (for Circular Stirrups) = 2πr = πd (r= radius, d= Diameter of Circle).
What is master ring in column?
: a cylindrical ring surrounding the plug in a master-keyed lock.
What is RCC unit weight?
2500kg/m^3
Unit weight of RCC = 2500kg/m^3.
What is cut length of bar?
Steps involved in finding the cutting length
Calculate the length of the hook of the bars. Calculate the bend length of steel bars. Add step 3 and 4 and subtract step 5 from it. It will gives you total cutting length of steel bars.
How can I learn BBS?
Step by Step Preparation of Bar Bending Schedule.
- Identification of Members (Steel Bars)
- Step 2 Count the Number of bars.
- Step 3: Calculate the length of Reinforcement bars. Development Length Chart.
- Step 4: Calculate the unit weight of Reinforcement Bar.
- Step 5: Calculate the Weight of particular Shape of Bar.
Why bar bending is done?
Bar bending schedule provides details of reinforcement cutting and bending length. Advantages of bar bending schedule is when used along with reinforcement detailed drawing improves the quality of construction, cost and time saving for concrete construction works.