What mics do you use for overhead drums?
The 11 Best Overhead Mics for Drums (With Audio)
- The Best Overhead Mics For Drums at a Glance.
- 1) Soyuz 013 FET Stereo Pair (Pro)
- 2) Neumann KM184 (Pro)
- 3) Shure KSM137 Studio Pair (Mid-range)
- 4) Behringer C-2 (Budget)
- 5) Rode M5 Overhead Mics (Budget)
- 6) Audio-Technica AT4041 (Budget)
Can you use SM57 as overhead drum mic?
Sm57 microphones are very versatile, they are used on almost every application you can think of, and to add to there versatility, they can also be used as OVERHEAD microphones… yes, Overheads.
Do I need overhead mics for drums?
The Importance of the Overhead Mics
The overheads are the unifying element in any drum sound. Don’t think of them as cymbal mics, but more as “everything” mics. If placed correctly, the overheads will capture the entire drum kit, in phase and with the same basic frequency balance and tone.
What are the best microphones to record drums?
What are the best drum mics for recording
- AKG D112 MKII.
- Audix D6.
- Shure Beta 52A.
- Sennheiser E602 II.
- Neumann U 47 FET.
- Audio-Technica ATM250DE.
Do overhead mics need phantom power?
Put simply, condenser microphones have active electronics that need an external power source, while dynamic mics are passive and therefore do not need phantom power. Because of the way condenser mics work, their output is very high impedance, and therefore requires a powered circuit to reduce that impedance.
How far apart should overheads be?
Typically, there would be about 17 cm between the capsules of each overhead microphone, and they would be angled 110 degrees apart from each other. As you might expect, not quite the phase issues as the spaced pair method, but much wider than the XY pattern.
Are Shure SM57 good for drums?
When it comes to micing a snare drum, the SM57 has pretty much dominated for the best part of 50 years. The SM57 adds just the right amount of low-end weight, while also adding presence and ‘crack’ to the drum. For this reason, the 57 is a go-to mic and has featured on countless records throughout music’s history.
Can you record drums with one SM57?
How To: Mic An ENTIRE Drumkit With One SM57 [NO SAMPLES] – YouTube
How Many Mics do drums need?
You typically need 5-20 mics to record drums, though you can use as few as 1-4. More microphones don’t automatically guarantee that your recording will sound better and may make it more difficult to get a clear, realistic sound. Proper recording involves spot, stereo, and room microphones.
How Many Mics do you need for live drums?
It is often suggested that you add at least one dedicated hi-hat mic and that, if you can, you have two overhead mics. This means five mics total in an ideal environment.
Are SM57 good for drums?
How many drum mics do you need?
What happens if you don’t use phantom power?
It will not hurt anything to leave your phantom power on. Most dynamic or condenser microphones that don’t require phantom power will reject it. Ribbon mics are the exception in this situation. Sending phantom power to a ribbon microphone will probably have disastrous consequences.
Are phantom powered mics better?
Among the most common is using a microphone pre-amp that supplies phantom power. This has the advantage of not only providing phantom power, but you also tend to have better quality inputs than many audio interfaces.
How far from snare should overheads be?
Like anything else, it varies, but usually around 35″ – 45″ from the snare for a good starting point.
How far should overhead mics be from snare?
Remember, phase is all about equal distance. What you really want to do is place the snare bottom mic the same distance from the bottom snare head as the top snare mic is. In other words, if you have a drum that’s 6″ deep, and the top snare mic is 1″ above the top head, it’s 7″ away from the bottom snare head.
Can I use SM57 in snare?
Is Shure SM57 good for drums?
How do you record a drum kit with one mic?
Recording Drums with 1 Microphone – YouTube
What level should I record drums?
If a recording is done properly, every drum, cymbal, and snare recording should be at least +3dB from -18dBFS level on peaks. If a recording is not done properly, it needs to be fixed in the mix before the mastering process.
Is 4 mics enough for drums?
Although some engineers tend to use upwards of eight microphones on a drum kit in the studio, you can achieve a quality sound at home using four strategically placed mics. A mixture of condenser and dynamic microphones is crucial to getting a good, punchy sound from home.
How many songs does it take to record drums?
If you’re playing many drums or the song has a lot of samples, then record them individually. Since most software will let you record up to 16 tracks at once, it’s worth considering how many different samples you will need and how many different tunes your song has.
How do I know if my mic needs phantom power?
How do I know if my mic needs phantom power? Well, the simplest way would be to verify whether your microphone is a condenser type or another type such as dynamic or ribbon. If it is a condenser microphone it will need phantom power, if it is a different type of microphone it will not.
Does phantom power improve sound quality?
Phantom power will not improve sound quality at all it will simply supply power to make your condenser microphone workable.
When should you not use phantom power?
Phantom power should not be used on Dynamic or Ribbon microphones. It’s also worth noting that phantom power should not be used on unbalanced cables. An example of an unbalance cable is a guitar lead. The reason for this is that typically microphone cables have 3 cores, 2 that send the signal and one that is a ground.