What are the sizes of socket sets?

What are the sizes of socket sets?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

How do I know what size my socket set is?

Socket set sizes

It’s important to note that socket sizes are actually given in two measurements, namely: The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.

What size are most socket sets?

Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets. Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters. The most commonly used types are 8 mm, 10 mm and 14 mm sockets.

What are the different socket sets?

What Are the Different Types of Sockets? There are two types of hex sockets — six-point and 12-point. The six-point hex socket has six points or angles inside the bolt end. The 12-point socket, also called a double-hex or bi-hex, has 12 angles in the bolt end.

What are the 3 common sizes of ratchets?

The most common ratchet sizes are ¼ inch drive, 3/8 inch drive, and ½ inch drive. There are also larger ratchet sizes including ¾ inch drive and 1-inch drive available. Most ratchets used with sockets contain a gear mechanism that is designed to allow for rotation in one direction only.

What is the next size down from 5 8?

Metric / Standard Wrench Conversion Chart

Is a 3/8 socket the same as a 10mm?

8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch.

What are the 4 different types of sockets?

What are the different types of socket?

• Hex Sockets. Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.
• Socket Bits.
• Impact Socket.
• Spark Plug Socket.
• Insulated Sockets.
• Pass Through Sockets.
• Adjustable Multi Sockets.
• Oil Filter Socket.

What are 1/4 ratchets used for?

A 1/4-inch ratchet is best for smaller sockets and precision work. The most versatile ratchet is the 3/8-inch size. This ratchet size can accommodate sockets of all sizes. It is big enough to apply a lot of force, but it can still fit into tight spaces.

What does SAE stand for in tools?

Society of Automotive Engineers
SAE stands for Society of Automotive Engineers. This form of measurement was used primarily on cars made in the USA. This is why more often than not if you’re in the United States, you’re most likely finding wrenches and sockets in SAE sizings. AE sockets are sized in inches and fractions of inches.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

Will a M10 nut fit a 3/8 bolt?

That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..

What size is 10mm in standard?

3/16″
Metric / Standard Wrench Conversion Chart

What type of sockets are most commonly used?

Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.

What is the most common ratchet size?

What are the 3 types of sockets?

What does sea stand for on wrenches?

SAE, which stands for the Society of Automotive Engineers, was used as the standard primarily on U.S.-made cars and trucks through the 1970s. SAE sockets are sized in inches and fractions of inches.

Does SAE mean synthetic?

Is SAE Oil Synthetic? SAE oils can be synthetic or otherwise. Having the SAE designation simply means it complies with the SAE standard.

Can you use a 3/4 socket instead of 19mm?

No, there’s no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

Which is bigger 19mm or 3/4 inch?

Does M10 mean 10mm?

M10 means a 10 millimeter outer diameter for the bolt or whatever piece it is; M12 means 12 millimeters. The part after the ‘x’ is the pitch — how many mm a thread is wide.

Are 3/8 and 10mm the same?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch)

What are the 5 different types of socket?

There are several types of socket wrenches, however, each of which uses a different method of operation.

• #1) Ratcheting. Ratching is the most common type of socket wrench.
• #2) Flex Head. There are flex-head socket wrenches that have a swiveling head.
• #3) T-Handle.
• #4) Nut Driver.
• #5) Gearless.

How do you know what size ratchet to buy?

Automotive Tools: How to Choose a Ratchet for Your Toolbox – YouTube

Do cars use SAE anymore?

Improvised repairs: Hardware stores still mostly sell SAE, so many improvised repairs will involve SAE nuts and bolts that you may have to deal with. Also, many aftermarket battery terminals are still SAE.