How do you fix a low flame on a gas fireplace?
Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.
How do I increase the fire in my gas fireplace?
If you want the flame higher we’ll lower it’ll say to increase it or decrease it. Or I’ll say high and low and you just rotate it around according to what you what you would.
How do I make my fireplace flame bigger?
Turn it clockwise to increase pressure and counterclockwise to decrease pressure. Retest the pressure taps after each rotation until it matches the ideal pressure readings as stated in the owner’s manual. Now, turn on your gas fireplace and note whether the flames seem higher now that the pressure has been adjusted.
Is there always a small flame in a gas fireplace?
Do Gas Fireplaces Always Have A Flame? Gas fireplaces that use a standing pilot ignition system will have a pilot flame that’s always on. Gas fireplaces that use an intermittent pilot ignition system won’t have and/or require a flame that’s always on as the pilot can be switched on and off as required.
How do you adjust the gas pressure on a gas fireplace?
Checking Valve Pressure – YouTube
How do you clean a thermocouple on a gas fireplace?
- Turn off the fireplace gas valve and remove the front panel from the fireplace.
- Use a can of compressed air to gently blow away any dust and dirt from the thermocouple.
- Wipe away any remaining dirt or soot on the thermocouple with a clean, dry cloth.
What should my gas fireplace flame look like?
Proper Flame Colour
A gas fireplace should burn flames that are blue, perhaps with very small tips in yellow or orange. The flames should be steady and consistent no matter what. Although, there is a small exception.
Does a gas fireplace need to be cleaned?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. Both propane and natural gas are clean burning gas fuels, so they don’t produce the same byproducts as wood, but they can still produce buildup that needs to be cleaned away.
How Big Should the flame be on a pilot light?
about 1/2 inch
Inspecting a Gas Furnace Pilot Light Flame
A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.
How do I know if my thermocouple is bad on my gas fireplace?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
What does a thermocouple look like on a gas fireplace?
Fireplace How To: Testing A Thermocouple – YouTube
Should gas fire flames be blue or yellow?
blue flames
Gas fireplaces have blue flames because their flames are hotter than the traditional orange and yellow flames. The blue flames being emitted from your fireplace are evidence that your gas is being burned properly and everything is combusting as it should.
What Colour flame is carbon monoxide?
blue
Burners producing EXTREMELY high concentrations of carbon monoxide can burn blue. Conversely, burners producing little carbon monoxide can burn yellow. Carbon monoxide is a colorless, odorless, tasteless, non-irritating and highly poisonous gas at low concentrations.
What is the lifespan of a gas fireplace?
ten to fifteen years
How Long Can a Gas Fireplace Last? Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.
Is it OK to leave pilot light on gas fireplace overnight?
It’s not safe to leave it on. Why Isn’t It Safe? The biggest reason is that gas fireplaces can release deadly carbon monoxide gas, which is odourless and can go unnoticed until a person dies from carbon monoxide poisoning. It is best to not leave your fireplace on for more than three hours at a time.
Can you adjust the pilot light on a gas fireplace?
How To: Adjust the pilot flame – YouTube
How big should a flame be for a pilot light on a gas fireplace?
A proper-size pilot light must be blue with a yellow tip. It must also be strong enough to cover about half an inch at the end of the thermocouple tip.
What are the symptoms of a bad thermocouple?
Failed Thermocouple Symptoms
Signs of contamination on the tube, e.g. discoloration, cracks, or pinholes. Signs of wear or corrosion of the wirings, e.g. missing insulation or bare wire. Physical damage to the connectors which can have an effect on the reliability of the test reading.
How long does a thermocouple last on a gas fireplace?
The thermocouple usually lasts for ten years. However, if it malfunctions, the pilot will not light, and the fireplace will not operate. As a result, a thermocouple is a crucial component in the operation of a fireplace.
How do I know if my thermocouple is broken?
If the pilot flame ignites but goes out after you release the gas control knob, the cause may be a dirty or defective thermocouple. If the gas is on but the flame will not ignite at all, a pilot tube obstruction is the most likely issue.
What color should the flame be in my gas fireplace?
Why is my gas flame orange and not blue?
If you see orange, yellow or red flames instead of blue flames, the burners may need cleaning or adjusting. The orange colour warns you that the gas stove has inappropriate combustion, and it may emit treacherous levels of carbon monoxide gas (CO).
How do I know if my gas fire is leaking carbon monoxide?
You see black, sooty marks on the front covers of gas fires. There is heavy condensation built up at the windowpane where the appliance is installed. Sooty or yellow/brown stains on or around boilers, stoves, or fires. Smoke building up in rooms.
What color should the flame be in a gas fireplace?
How often do gas fireplaces need to be cleaned?
Even though gas fireplaces do not burn wood or make smoke, cleaning a gas fireplace monthly is essential, even when it is not being used. Regular cleaning will prevent dust and dirt from harming mechanisms and allow you to inspect the system for damage.