Are jet jointers good?
JET’s jointers are a popular choice for both hobbyist woodworkers and small professional workshops. They offer a tried and tested cast-iron design of solid quality for a reasonable price. However, JET makes four jointer models and the differences between them are not always obvious.
Can you plane wood with a jointer?
When it comes to flattening and squaring a board, a jointer can do things that a planer simply cannot. But, when it comes to quickly reducing the thickness of a board, or ensuring that opposing planes are parallel, the planer is the only tool for the job.
What does a jet jointer do?
What a Jointer Does & How It Works. A jointer is used to make the face of a warped, twisted, or bowed board flat. After your boards are flat, then the jointer can be used to straighten and square edges (guard removed for photo).
What should you not do with a jointer?
Never make adjustments when the jointer is running. Don’t try “freehand” manipulations that do not require use of the fence. Avoid heavy cuts that might jam the cutterhead. Take off no more than 1⁄ 16 ” per pass on softwoods and even less on hardwood stock.
How big of a jointer should I get?
Choosing by size
Without any auxiliary extensions, a jointer can comfortably handle lumber about twice as long as the bed, so bed length, along with blade size, dictates the size of material the tool can process. The smallest size useful to most woodworkers is the 6-in.
What can you do with a 6-inch jointer?
What to Look For In A 6″ Jointer – WOOD magazine – YouTube
Should I plane or jointer first?
You’ll always have the need to reduce your board thickness to fit the project you have in hand. That is why you should go for the planer first. Then later, you can get a jointer.
What is better to have a jointer or planer?
In my opinion, you should purchase the planer first. You’ll be able to accomplish more with it on its own than you can with a jointer. The jointer excels at making one flat face and one square/flat edge and that’s about it.
What is the difference between a joiner and a jointer?
What it all comes down to is the task that you are looking to accomplish. If you are making joints to join together two pieces of wood, it is a joiner that you need. If you are trueing or flattening the face of a board, or squaring a face with an edge, then it is the jointer that you need.
Do I need a jointer if I have a table saw?
Jointing with Table Saw to Square Both Sides of a Wood Piece (without jointer) Although the table saw can be used as a jointer to make the faces of a wood piece flat, it can also be used to square an edge to have perfectly perpendicular faces.
Do I really need a jointer?
Simply purchase your lumber already milled in S3S or S4S form (surfaced on three sides or surfaced on 4 sides). If you’re at a point in your woodworking where you’re starting to use rough sawn lumber, say from a lumber mill or your local sawyer, then a jointer is absolutely essential to your shop workflow.
Do you need a planer if you have a jointer?
Most woodworkers know that you need both a planer and a jointer to get the most out of rough lumber (at least for power tool users). The jointer is used to flatten one face and square up one edge and the planer is then used to make the second face flat and parallel to the first.
How long of a board can you joint on a jointer?
Use a pushstick and/ or pushblock, and keep your hands a safe distance from the cutterhead. Don’t joint pieces shorter than about 12″. Don’t overreach when jointing long boards. Always wear eye and ear protection.
Can a table saw be used as a jointer?
Using Your Table Saw as a Jointer. Even if you own a jointer, you’ll want to master this technique. With the addition of a simple shop-made fence, you can easily edge joint on your table saw. Remember that man-made materials like plywood can be hard on steel jointer knives – but not on carbide table saw blades.
Do you plane both sides of wood?
Once you’ve flattened one side, you can flip the work and run it through the planer with the flat side down (no sled required) to flatten the other side and ensure that it’s parallel to the first side. The key to the sled is that it provides a flat reference surface.
Can I use my table saw as a jointer?
Jointing with a Table Saw – YouTube
Do you use a jointer or planer first?
If you are using both a planer and a jointer on the same project, you should use the jointer first. The jointer will provide a flat edge and a square end. The planer can then provide you with a perfectly parallel flat side on the wood’s opposing face and edge.
Can I use a circular saw as a jointer?
The fifth way is jointing with a circular saw. So if you don’t have a table saw or a jointer, you can still joint boards with a circular saw. All you would need to do is make a similar jig using the MicroJig dovetail clamps.
Can a table saw act as a jointer?
Although the table saw can be used as a jointer to make the faces of a wood piece flat, it can also be used to square an edge to have perfectly perpendicular faces. You can use the same jig to do this. For adjacent faces to be perpendicular, the table saw blade must be square with the tabletop.
Do you joint or plane first?
Can you use a table saw as a jointer?
Do you really need a jointer?
Should you use a jointer or planer first?
Does a jointer straighten boards?
The best power tool for that job is the jointer. A jointer quickly smooths and flattens the edge of a board while cutting it square to an adjacent edge. Once this is done, the board is ready to lie flat against a table saw fence or table for a straight cut.
How do you join two pieces of wood without a jointer?
5 Ways to Joint a Board Without a Jointer – YouTube