What is the fretboard radius on a Stratocaster?

What is the fretboard radius on a Stratocaster?

For example, original Stratocasters have a 7.25″ radius (184.15mm), which is very curvy. It makes chording easier (especially barre chords), but if your string height is low there’s a risk of notes ‘choking out’ on higher frets if you bend them too far.

Do Fender Strats have a compound radius?

Fingerboard Radius: 9.5″-14″ Compound Radius (241 mm-355.6 mm)

What is a good fretboard radius?

Typically measured in inches, the most popular fretboard radius used today is 9.5″ (or 241mm), with the next most common being 7.25″ – the most prevalent option prior to the 1980s.

When did Fender change to 9.5 radius?

Today, most Fender electric instruments use one of two main fingerboard radius measurements. Most prevalent is the modern 9.5” radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments.

Is a 12 radius neck good?

Having a larger 12″ radius means the fretboard feels flatter and makes it more suitable for bending the strings. You’ll often see that lead players like to use a flatter fretboard (larger radius) because it feels better for solos (which often require bending) and moving around the fretboard more quickly.

Whats the radius on a Les Paul?

But the new Standard also features a compound neck radius, and whereas the Les Paul Standard Traditional sports a 12″ radius from nut to the 22nd fret, the new Standard boasts a 10″ radius at the nut that flattens to 16″ at the other end of the fretboard.

Which Fender guitars have a compound radius?

One of the most talked-about features of the Fender American Elite series is the neck, which has a 9.5”-14” compound-radius fingerboard and blends perfectly into a comfortable asymmetrical neck heel.

Is compound radius neck better?

A compound radius neck is a neck that has one radius at the nut and a different, larger radius at the heel of the neck. This is meant to give a better playing experience for both rhythm playing towards the nut side of the fretboard, and soloing towards the heel side.

Which neck radius is easiest?

The Quick Answer. Guitar necks with a 9.5″ fingerboard radius make it easier for most players to hold chords compared to necks with a 12″ radius. However, a 12″ radius will make it easier to bend the strings and means the guitar can have a lower action without causing fret buzz compared to a 9.5″ radius.

Which guitar neck radius is easiest?

There are different sizes of nack radius for different guitars, however, a 9.5 to 12-inch neck radius is best for small hands. With these radius sizes, guitars are easy to hold and play.

What neck radius does Eric Clapton use?

9.5″
Specs

Neck Material: Maple
Neck Shape: Soft “V”
Scale Length: 25.5″ (64.77 cm)
Fingerboard Radius: 9.5″ (241 mm)
Number of Frets: 22

Which Stratocaster neck is best?

4 Best Stratocater Replacement Necks

  • Fender Roasted Maple Flat Oval Neck.
  • Fender Modern C Maple Neck.
  • Fender American ’60s Original Neck.
  • Fender American Professional Neck.

What radius is a Gibson SG?

12″ radius

Here is a close look at a 12″ radius on a 2020 Gibson SG… While Gibson continues to use the 10″-12″ on most electrics, Fender has long since acknowledged that modifying the fingerboard radius will change the left-hand experience.

What guitars have a 12 inch radius?

Manufacturer/Brand Model Fretboard Radius
Guild 12-strings 16″
Greg Bennett Most 12″
Gretsch G6120-1959 9.45″
Gretsch Most 12″

What fretboard radius is best for small hands?

People with small hands tend to have an easier time playing on flatter, thinner necks, which means that they will often benefit from a fretboard radius that is 12“ or above.

Does fretboard radius really matter?

Other common sizes for fretboard radius are 9.5″, 10″, and 12″. The higher the number, the flatter the fingerboard. From a guitarist’s viewpoint, fingerboard radius has to do with feel and playability and is completely subjective; no radius is better or worse.

Which Fender neck is best for small hands?

Small hands: C or flat C shaped necks
Generally the shallower the profile the better e.g. C or flat C, provided it is in combination with a thin fretboard. One of the challenges of playing guitar with small hands is the ability to span frets.

Are Strats good for small hands?

The Vintage Modified Stratocaster is the perfect choice for those that have smaller hands as its smaller than a regular Telecaster. There’s a tone, volume, and a selector switch for the pickups. There’s a 9.5 fretboard radius and 21 jumbo frets so its very comfortable to play and the entire neck is maple.

Related Post