What is a Hong Kong seam finish?
What is a Hong Kong finish? It’s like a bound seam, with individual seam allowance edges encased with lightweight fabric, like silk or other lining material to hide the raw edges. A bound seam uses a double layer of fabric to encase the edges, but a Hong Kong finish uses a single layer.
How do you make a Hong Kong finish?
So here’s my demo seam that I’m going to be doing on and you start it up normal just as you would any other seam go ahead and stitch it your seam allowance. And then press your seam open.
What is a Hong Kong hem?
What is a Hong Kong finish? A Hong Kong finish is a method of binding seams with bias tape. Unlike traditional bound seams, the binding on the wrong side of the seam allowance is left unturned, reducing bulk significantly.
How do you finish seams with bias binding?
Behind the actual first row of line of stitching on the underside. And that is where you’re going to stitch very very close to the bias binding.
How do you finish a seam without a serger?
6 Ways To Finish Seams WITHOUT A Serger! – YouTube
What is a French seam?
French seams are sewn twice, encasing the raw edge within the seam and creating a very neat, delicate seam that is ideal for sheer or lightweight fabrics. 01. With wrong sides together, pin the corresponding pieces. Using a straight stitch, sew a seam at a 3/8” seam allowance.
What is a Serged seam?
Sergers, also known as overlockers, sew with an all-in-one finish. They sew the seam, trim the seam allowance and neaten the seam with an overlocking stitch all in one motion.
How do you complete Armscye seams?
How to French Seam an Armhole – YouTube
Can bias tape be used as seam binding?
Bias tape is made of woven fabrics like cotton that are a bit more coarse and less flexible than seam binding. It is made by folding fabric over on itself two or three times and is always applied while folded. It is often used for outer seam edges that you want to be visible on the final project.
How do you do a French seam?
How to Sew a French Seam – YouTube
What can I do instead of overlocking?
You can use alternative seam finishing techniques that will finish garments neatly without an overlocker. You can use French seams or flat fell seams or even a simple zig zag stitch. Overlockers are not used in couture garments, in fact many seams are left raw.
What are the 3 types of seams?
The Finished Edges of the Seam – The seam finish, making it a closed seam, or an open seam, with a finishing edge is part of the different seam types.
What is a princess seam in sewing?
Princess seams are long rounded seams sewn into women’s blouses or shirts to add shaping or a tailored fit to closely follow a woman’s shape. They are sewn into the front and/or back of a shirt, and extend from the waist up to the arms.
What should never be used when Serging?
Don’t use inferior quality threads or old cotton threads. Cotton thread is usually a poor choice for any serger project. Tension on serger thread can make cotton snap and break easily.
What is a flatlock seam?
A flatlock is a seam which ensures that two pieces of fabric stay together. A ”normal” seam can start to irritate your skin. This happens because two layers of fabric are connected by a single thread which causes some overlap between the two fabrics.
How do you finish an armhole without bias tape?
How to finish a neckline without bias strips! – YouTube
What can I use instead of seam binding?
Regular hem tape is flat like seam binding ribbon and comes in many colors, but it is usually made of polyester instead of rayon. Beyond this, however, hem tape and seam binding ribbon can be used in the same ways.
What is the disadvantage of French seam?
The main disadvantage of a French seam is the visibility of the seam. The seam isn’t fixed flat, so it has movement and can be pushed to either side of the actual seam line. This can be a pain when ironing, as you then often see the imprint of the seam on the right side of the garment.
How do you finish seams without overlocker?
How to Finish Seams without an Overlocker or Serger – Zigzag Stitch
Can a sewing machine do overlocking?
Overlocking on your sewing machine
Essentially it allows thread to wrap around the edge of the fabric to prevent unraveling. It is a magical little sewing machine foot that can give you an edging similar to that of an overlocker with just about any sewing machine. You can buy an overlocking foot here.
What is the strongest seam?
Flat felled seams
Flat felled seams are the strongest seams and won’t fray as raw edges are hidden. Although often sewn on thick fabrics, they can be sewn on thinner fabrics as they produce a very neat finish.
What are the 5 types of seams?
In clothing construction, seams are classified by their type (plain, lapped, bound, flat) and position in the finished garment (centre back seam, inseam, side seam).
What is a French dart in sewing?
French darts are more elongated than standard bust darts. They start lower on the bodice (at the side seam, down near the waistline) and end up near the bust point — effectively combining a bust dart and waist dart into one.
Should you Serge before or after sewing?
Sew first, then serge: I think this would be a good place to start if you’re a serger noob. A serger does take some adjustment when sewing. Because the machine cuts the seam allowance off as you sew, you’ve got a lot less room for error. I sew first when I’m assembling awkward seams.
Why are my Serged seams wavy?
If the fabric edge looks stretched out and wavy, it means the fabric is being pulled through too fast at the back. Turn the differential feed up to balance it out. If the seam looks gathered, it means the fabric is being pushed in at the front faster than it is being pulled out at the back.