What are the parts of a hot tub called?
What Are the Main Components of a Hot Tub?
- The Shell. It’s exactly what it sounds like!
- Cabinet. The purpose of the hot tub cabinet is two-fold.
- Pumps.
- Jets or Hydro Jets.
- Blowers.
- Spa Pack: Controller and Heater.
- Topside (or Spaside) Control.
- Filters / Sanitation System.
What do the two knobs on a hot tub do?
Air controls are the knobs on the side of the spa that are used as air intakes. Some spas have several air control knobs, which control the amount of air intake (and thus air output) for a certain group of spa jets, or a particular air manifold.
What are the knobs on top of hot tub?
But what about the knobs on the top of the spa. The larger knobs are called diverters, which help direct the water of your hot tub. You can turn the diverters so that water is moving through all jets of the spa. Or, use the diverters to direct water to certain seats.
Does Jacuzzi use proprietary parts?
Some brands using proprietary components are Jacuzzi Hot Tubs and Hotspring Spas especially in their more premium models. Some of the proprietary components are things like pillows, jets, control panels, motherboards, salt generators, etc.
What is a hot tub nozzle called?
A hot tub jet in simple terms is a nozzle that is locked into the jet body (holder). There are many different types of jet from ultimate moving jets like the Hot Spring Moto Massage to rotary jets and more standard directional jets.
Do hot tubs heat their own water?
Electrical Resistance Heaters, Pumps & Jets
Electrical resistance heaters are fundamental to hot tubs. These elements are responsible for generating heat. Pressure pumps are responsible for pushing water through the assembly housing. As water makes its way through the heater assembly, it is heated by an element coil.
What does the AUX button do on a hot tub?
AUX input lets you plug in other devices. J-500™ Collection, J-400™ Collection and J-300™ Collection hot tubs have marine-grade speakers plus a subwoofer.
What do the buttons mean on my hot tub?
Some larger hot tubs may have up to three jet buttons on the control panel that allow you to adjust the speed and strength of your jets. In most cases, pushing the button the first time will turn them on a low setting and pushing it again will increase the speed.
Should hot tub jets always be on?
One of the most common questions our team gets asked is “should I leave my hot tub on all the time?” Quite simply, the answer is yes… your hot tub is designed to be left switched on constantly and works best when it is left on all the time. Your hot tub is at it’s most efficient if left to run 24/7.
Can you put baking soda in your hot tub?
If you want to raise the alkalinity of your hot tub’s water, use one tablespoon of baking soda per every one hundred gallons of water in your hot tub (about 6 tablespoons for most regular-sized hot tubs).
Are hot tub parts interchangeable?
Hot tubs may all seem like boxes of hot water with interchangeable parts. But the truth is many hot tub manufacturers contract with various suppliers to create parts, jets and control systems that are unique to their brand and in some cases proprietary.
Does Jacuzzi use Balboa parts?
Balboa doesn’t sell hot tubs, but plenty of manufacturers use Balboa parts in their hot tubs. These manufacturers include Essential Hot Tubs, Cal Spa, Artesian, and many others.
How long do hot tub jets last?
7-10 years
Overall, you can expect your jets to last anywhere from 7-10 years, assuming that you take care of your water. In unbalanced the moving parts in a jet can break down in as little as 3 years.
How do I make my hot tub jets stronger?
Tips to Increase Jet Pressure in your Hot Tub – YouTube
What temperature should I keep my hot tub when not in use?
As a general rule, a hot tub should be set between 98 and 104 degrees Farenheit even if not in use. For vacations lasting between 2 and 6 weeks, lower the temperature by 5 degrees. Beyond 6 weeks, consider powering down and draining.
Does hot tub heat up faster with jets on?
A hot tub will always heat up faster with jets. This is because it disburses the heated water throughout the tub more efficiently and breaks up any cold pockets hanging around in the pipes. And you can also put a cover over the hot tub with the heater and jets going to trap the heat inside.
What temperature should a hot tub be?
between 100-102 degrees Fahrenheit
The Ideal Hot Tub Temperature for Relaxing
Most hot tub users find that the perfect temperature is between 100-102 degrees Fahrenheit. However, some like the water to be body temperature at 98 degrees, and some like it hotter–up to 104 degrees.
How do you connect your phone to a hot tub?
Bluetooth for Hot Tubs – YouTube
How do I reset my hot tub control panel?
You can reset a hot tub control panel by switching it off, waiting for between 10 and 20 seconds and then switching it back on again. If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is.
What are the different modes on a hot tub?
Spa Modes
- SLEEP mode heats the spa water to within 20 degrees of the set temperature during the filter cycle. For example, if your spa is set for 100 degrees, on sleep mode it will heat to 80 degrees and stop.
- ECONOMY mode heats the spa water during filter cycles only.
- STANDARD mode maintains your set temperature.
What temperature should you keep your hot tub when not in use?
While it may sound like common sense to turn your hot tub down every time it is not in use, it’s actually better to maintain a constant soaking temperature, which is typically around 100° Fahrenheit for many people.
Is it OK to run hot tub jets with cover on?
Hot tub jets can be run with the cover on. But if chemicals have just been added, it is best to leave the cover off for 20 minutes as the mist of the water and chemicals could damage the underside of the cover over time.
How do I keep my hot tub water crystal clear?
How can I prevent getting cloudy water in my hot tub?
- Shower before using hot tub (don’t use any soap, just rinse off in the water)
- Don’t wash swimming costumes in detergent. Just rinse them in warm water after use.
- Clean filters regularly.
- Make sure your water chemistry is correct.
Should I shock my hot tub after every use?
Regular hot tub shocking is inevitable to keep your water clean and safe for use. Dead skin and other elements like hair may end up dropping in the hot tub, leaving the tub in a mess. It is essential to shock the hot tub frequently – at least once every week.
What is the difference between a 48 frame motor and a 56 frame motor?
The main difference between a 48 frame and a 56 frame hot tub pump is that the 48 frame has a smaller motor housing and so the 4 through bolts that fasten the wet end to the motor are closer together on the smaller motor.