Can you swap hard drives on a MacBook Pro?

Can you swap hard drives on a MacBook Pro?

Generally: if the hardware fits, you can swap it. Installations of MacOS are usually device-independent. You could put the hard drive from your Mac into an external drive caddy and boot up from it on most Macs. (As long as the Mac model isn’t too old to run the OS.)

How do I upgrade my MacBook Pro 2009?

Your 2009 MacBook can only upgrade to MacOS X El Capitan 10.11. 6, which will once installed and updated through the App Store Updates page will run Safari 11.1. 2. this downloads InstallMacOSX.

How do I install OSX on a new hard drive?

Briefly press the power button, then immediately hold the option key while your Mac boots up. Keep holding option until a disc appears on the startup selection screen. If your disc never appears, repeat these steps holding the C key instead. Choose to boot up from your OS X installation disc.

How do I install a new harddrive in my MacBook Pro?

want off the drive prior to formatting.

1. Physically install the drive into the Mac.
2. Insert the Mac OS X install CD or USB drive.
3. Power on the computer while holding down the option key.
4. Select Installer.
5. Select Disk Utility.
6. Highlight the drive.
7. ​Select Erase.
8. Enter Volume information (Name, Format, and Scheme).

How do I reinstall macOS after replacing hard drive?

Simply follow the instructions below to install the latest compatible version of macOS or OS X on your new hard drive.

1. Quick Tips.
2. Format your new hard drive for macOS or OS X.
3. Install macOS using Internet Recovery Mode.
4. Create a bootable USB installer for macOS or OS X.
5. Use a Mac OS X installation Disc.

How do I transfer macOS from HDD to SSD?

How to Upgrade Mac to SSD Drive and Transfer Data

1. Make Time Machine Backup to External Hard Drive.
2. Replace Existing Hard Drive on Mac with SSD Drive.
3. Format New SSD Drive Using Disk Utility.
4. Transfer Data From Old HDD to New SSD Drive on Mac.
5. Desktop & Apps Missing After Time Machine Restore.

How do I boot my Mac after replacing a hard drive?

Power off your Mac from the  menu or by holding the power button. Briefly press the power button, then immediately hold the option key while your Mac boots up. Release the key when a startup disk selection screen appears. Choose to boot up from your USB installer.

How do I transfer my OS to a new hard drive Mac?

Migrating Your Mac OS X Installation to a New Drive

1. Migrating Your Mac OS X Installation to a New Drive.
2. STEP #1: Choose the correct drive to install in your computer.
3. STEP #2: Make sure you have a way to transfer your data.
4. STEP #3: Make sure you have a current backup.
5. STEP #4: Install your new drive.

How do I replace the hard drive on my MacBook Pro 13?

When replacing your hard drive, you must transfer the four locating pins (removed with a T6 screwdriver) from the old hard drive to the new one. Remove the following 10 screws securing the lower case to the MacBook Pro 13″ Unibody:

How do I remove the lower case of a MacBook Pro?

Remove the following 10 screws securing the lower case to the MacBook Pro 13″ Unibody: Seven 3 mm Phillips screws. Three 13.5 mm Phillips screws. Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

How do I replace the hard drive on my HP laptop?

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case. Remove the lower case and set it aside. Remove the two 5-Point Pentalobe screws along the top edge of the battery. You do not necessarily have to follow steps 3-6 to remove the battery in order to replace the hard drive.

How do I remove the battery to replace the hard drive?

Remove the two 5-Point Pentalobe screws along the top edge of the battery. You do not necessarily have to follow steps 3-6 to remove the battery in order to replace the hard drive. However it is recommended to remove all power sources from electronics before working on them.