How do I reset my Cisco phone to factory settings?

How do I reset my Cisco phone to factory settings?

Press and hold the microphone button for about 5 seconds then release it. The lights will blink red twice. Press and hold the microphone button. After about 5 seconds, the links will blink red continuously, indicating that the hard reset is complete.

How do I reset my Cisco phone without a password?

Factory Reset Cisco IP Phone 7841 (Using Keypad)

1. Unplug the phone’s LAN cable.
2. Wait 5 seconds.
3. Press and hold # button while plugging the phone back in.
4. Release the # button when the light on the handset blinks red 2 times.
5. Press 123456789*0# in sequence.

How do I reset my IP Communicator?

The procedure is as follows:

1. Unplug the power from the phone.
2. As you plug it back it, press and hold the “#” key.
3. When those three buttons start flashing in sequence release the “#” key and enter the following code “123456789*0#”.

How do I reset my Cisco 8841?

Workaround:

1. Press “#” when you power on the phone.
2. You will see the headset,speaker and mute will light on and then light off.
3. When you see only headset and speaker turn on again, please press 123456789*0# in sequence.
4. After you pressed the the first digit “1”, you will see speaker turn off.

How do I Reset my IP phone?

Factory Reset

1. Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle.
2. While the phone is powering up, and before the Speaker button flashes on and off. Press and hold #.
3. Release # and press 123456789*0#. The phone will reboot and will indicate he is upgrading his firmware.

What is the default password for Cisco IP Phone?

Default password is 12345)

Set a new password.

How do I reset my Cisco IP phone password?

You can use a query to locate users and reset passwords and PINs to a default value. Step 1 Choose Bulk Administration > Users > Reset Password/PIN > Query. The Reset Password/PIN for Users Query window displays. Step 4 Specify the appropriate search text, if applicable, and click Find.

How do I troubleshoot my Cisco IP Phone?

General Troubleshooting Sequence:

1. Disable DHCP and DNS to Test a Phone.
2. Check for the Incorrect MAC Address on the Phone Label.
3. Cisco CallManager and TFTP Services Do Not Run.
4. Delete and Recreate a Phone.
5. Understand a Network Trace File.
6. Use Performance Monitor to Analyze Phone Activity.

How do I reset my Cisco 7861 phone?

Factory Reset

1. Press the Settings button.
2. Select Device Administration > Factory Reset > Ok. Result: The phone will automatically reboot.

How do you do a soft reset on a Cisco IP phone?

Unplug the power cable from the phone, and then plug in the cable again: the phone begins its power up cycle. The Headset/Mute & Speaker buttons flash in sequence indicating you may enter the reset key sequence. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

How do I factory reset my CP 8865?

RESOLUTION/STEPS

1. Press the settings button on the phone.
2. From the Applications menu select Admin Settings.
3. Select Option 4 “Reset Settings.” to navigate to the Reset Settings menu.
4. From the “Reset Settings” Menu select option 2 “All Settings.”
5. You will see a “Reset all Settings” confirmation pop up.

How do you reset a soft phone?

To perform a soft reset, you power off your phone and turn it back on. Restarting your phone closes all the processes and apps running on your phone and loads all the system files from scratch. A soft reset does not come with the risk of losing your data.

How do I reboot my Cisco phone remotely?

Simply add /admin/reboot to the phone’s IP in web URL (e.g. http://192.168.0.51/admin/reboot) and providing there are no active calls, phone will reboot.

How do I reset my cisco IP phone password?

What is cisco default password?

cisco
3. When the login page opens, enter the username and password. The default username is cisco. The default password is cisco.

What is the default password for cisco IP Phone?

What is the default PIN for cisco phone?

24726
Access Phone Configuration Settings
When there is no User ID or PIN associated with a phone, the phone uses a default PIN of 24726.

How do I get my Cisco phone to work?

How do I plug in my Cisco phone? – YouTube

Why is my Cisco phone not ringing?

Check if the ringtype of the phone is set to Silent Ring; press the Home button, then go to Ringtone > Change > Select (pressing select will toggle between the ringtone options > Play (pressing play will play the selected ringtone). Press Change to apply the changes.

How do I factory reset my cp7821?

Press the Settings button. Select Device Administration > Factory Reset > Ok.

How do I reset my Cisco phone remotely?

How do you reset your computer to factory?

Navigate to Settings > Update & Security > Recovery. You should see a title that says “Reset this PC.” Click Get Started. You can either select Keep My Files or Remove Everything. The former resets your options to default and removes uninstalled apps, like browsers, but keeps your data intact.

How do I do a hard reset?

How to Factory Reset an Android Mobile Phone (Hard Reset) (42)

How do I do a factory reset?

How to perform Factory Reset on Android smartphone?

1. Tap Apps.
2. Tap Settings.
3. Tap Backup and reset.
4. Tap Factory data reset.
5. Tap Reset Device.
6. Tap Erase Everything.

How do I reset my IP phone?