How do you use a Harley security fob?
STARTING YOUR HARLEY-DAVIDSON WITH YOUR KEY FOB
- Choose a five digit code (with each digit being 1-9) Keep this somewhere safe!
- With your assigned FOB present, turn ignition key ON – OFF – ON – OFF – ON.
- Press left turn signal indicator two times.
- Press right turn signal indicator one time then release.
How do you activate a Harley-Davidson security system?
Press and release the left turn signal switch. In the odometer window, a flashing 1 will appear. Increment the digit by tapping the left turn signal until the odometer window displays the first digit of the PIN. The first digit in the odometer will be the first digit in the PIN.
What does the button do on a Harley key fob?
Retract key: Press the button to release the key. Rotate the key back into the fob body. The key fob remotely locks and unlocks the fork lock switch, saddlebags and Tour-Pak. The key fob can actuate the locks while the motorcycle is on or off….
| 1 | Key |
|---|---|
| 2 | Button |
| 3 | Fob |
What does red key on Harley mean?
Only show this user. If the security light (the key) stays on solid (not flashing) and the bike starts and runs, it means the bike has thrown a DTC. (diagnostic trouble code) It is essentially the equivalent of the “check engine” light on a car. The procedure for checking the code is posted in the electrical section.
What is the red key light on my Harley?
Registered. If the security light (the key) stays on solid (not flashing) and the bike starts and runs, it means the bike has thrown a DTC. (diagnostic trouble code) It is essentially the equivalent of the “check engine” light on a car.
What does it mean when the red key light comes on?
The red key warning light means there is a security error code. This light illuminates when the vehicle control modules see the ignition turned with a key that is not programmed to the vehicle or when there is an error within the security protocol of the vehicle’s security system.
How does Harley Davidson security system work?
When the motorcycle is parked and the ignition key is turned to OFF, the Harley-Davidson® Smart Security System arms automatically within five seconds if no motion is detected. Upon arming, the turn signals will flash twice and the optional siren will chirp twice.
Why is my security light blinking?
The security light on your dashboard is an indicator for the car’s anti-theft system. It serves two main purposes: When the engine is off: In some cars, the security light flashes when the ignition is off to show that the security system is active.
How do you read Harley-Davidson trouble codes?
Hold down the trip reset button while turning the ignition to on position. Click the trip button to cycle through modules and hold down trip button to display codes (displayed text will vary based on year and model)
What does the security indicator light look like?
A light on your dashboard that looks like a car and a lock is the security light. It generally indicates an issue with the car’s anti-theft immobilizer system.
Can a pager receiver be linked to a Harley Davidson vehicle?
Designed to complement the Smart Siren II, this pager Receiver can be linked to the vehicle with no additional installation. Fits models equipped with Harley-Davidson ® Security System Smart Siren II.
How do I disarmed my Harley-Davidson® Smart Security system?
In the event of a misplaced or disabled fob, your Harley-Davidson® smart security system can be disarmed by using your five-digit, Personal Identification Number (PIN). Follow each step in the process below carefully. Note: Do not turn handlebars, straddle seat or lift motorcycle off the jiffy stand.
How does a pager work on a siren?
The pager monitors the Security System operation and, using LED indicators, displays unique codes for arming, disarming and trigger modes. The pager receiver is designed to operate in conjunction with, and requires the use of, the Security System Key Fob and Security System Smart Siren II.
How do I operate the flashlight on my Pager receiver?
Press and hold the button on the back of the pager receiver as desired to operate the ultra bright LED flashlight (E) on the top of the pager receiver.