How do I set up a new Brocade SAN switch?

02/11/202202/11/2022 | Sarah HendricksonSarah Hendrickson | 0 Comment | 12:00 am

How do I set up a new Brocade SAN switch?

Connecting to the CLI

  1. Connect the workstation to the Ethernet network containing the HPE Synergy Frame Link Module.
  2. Connect to the switch using ssh or open a Telnet connection using the IP address set earlier.
  3. Enter the user name, using an administrative account.
  4. Enter the password.
  5. Verify the login was successful.

How do I change the port speed on my brocade?

Steps

  1. Configure the port speed: portcfgspeed port octet_combo.
  2. If more than one ISL for each fabric is used, enable trunking by issuing the following command for each ISL port: portcfgtrunkport port-number 1.
  3. Enable QoS traffic by issuing the following command for each of the ISL ports: portcfgqos –enable port-number.

How do I reset the port on my Brocade switch?

Resetting the Brocade FC switch to factory defaults

  1. Log in to the switch as an administrator.
  2. Disable the Brocade Virtual Fabrics (VF) feature:
  3. Disconnect the ISL cables from the ports on the switch.
  4. Disable the switch:
  5. Disable the configuration:
  6. Clear the configuration:
  7. Save the configuration:

What is a Brocade 7840?

The Brocade 7840 is an ideal platform for building a high-performance data center extension infrastructure for replication and backup solutions (see Figure 1). It leverages any type of inter-data center WAN transport to extend open systems and mainframe storage applications over any distance.

What is FCIP tunnel?

FCIP is defined as a tunneling protocol for connecting geographically distributed Fibre Channel SANs transparently over IP networks. It uses TCP/IP as the transport while keeping Fibre Channel fabric services intact.

How do I access my Brocade SAN switch GUI?

Accessing GUI of Brocade SAN Switch without Broswer

  1. Console to the Brocade SAN Switch with default username = admin & Password = password to configure the IP Address Warning: Default password not changed for ‘root’.
  2. Install the latest JAVA version.
  3. Add the IP Address of the SAN Switch to Exception Site List in JAVA.

How do I check my Brocade port speed?

How to configure port speed on a Brocade & Cisco MDS Switch via CLI

How do I check my port status on my Brocade switch?

From the Main Menu, select:

  1. Status and Counters.
  2. Port Status.

How do I restart a port?

To restart a network port on remote computer, follow these steps.

  1. Step 1: check the active network ports and its name. open cmd prompt as administrator.
  2. Step 2: select the interface you want to restart.
  3. Step 3: open note pad.
  4. Step 4: save this notepad as NetworkPortRestart.bat.
  5. Step 5: Run that batch file in command pormpt.

How do I clear CRC errors in Brocade switch?

How to clear interface and ASIC counters on Brocade B – YouTube

What does FCIP stand for?

The Fellow Chartered Insurance Professional (FCIP) Designation.

What is the difference between FCIP and FCoE?

FCIP is superior for creating tunnels between different networks for seamless communication. FCoE shines for SAN setups that regularly need to switch how they communicate with different devices within the server system.

How do I enable HTTP in Brocade SAN Switch?

How to: Brocade 300 Enabling HTTPS

  1. Step 1: SSH into the switch and log in as root. login as: root root @1.2.3.4’s password: <PASSWORD>
  2. Step 2: Generate keys. seccertutil genkey -keysize 2048.
  3. Step 3: Generate the CSR.
  4. Step 4: Generate certificate.
  5. Step 5: Import and enable HTTPS.

What is the default root password for Brocade switches?

The default password of “admin” is “password”. The OS of brocade switch uses Linux 2.6 kernel. The root is super administrator account.

How do you check port utilization on a Brocade switch?

Displaying Ethernet port utilization

  1. Click Monitor on the left pane and select Port.
  2. Click Utilization and then select Ethernet.
  3. For the Brocade FCX and Brocade ICX devices, select a unit ID in the Select Stack Unit ID list and click Display to view information about a specific stack unit.

How do I check my port settings?

To check the mode setting for a port on the switch, use either the Port Status screen in the menu interface or show interfaces brief in the CLI (see Viewing port status and configuration (CLI)).

How do I know if my switch port is working?

Check for blinking green lights above the “WAN” and “LAN 1” ports on the Ethernet switch. A blinking green light represents an active connection. Open a Web browser on your laptop to confirm that the connection is active.

How do I clear all ports?

Windows

  1. Open a CMD window in Administrator mode by navigating to Start > Run > type cmd > right-click Command Prompt, then select Run as administrator.
  2. Use the netstat command lists all the active ports.
  3. To kill this process (the /f is force): taskkill /pid 18264 /f.

How do you check what is running on port?

Determine which program uses or blocks a port

  1. Open a CMD prompt.
  2. Type in the command: netstat -ano -p tcp.
  3. You’ll get an output similar to this one.
  4. Look-out for the TCP port in the Local Address list and note the corresponding PID number.

How do I resolve CRC errors?

How to Fix the Cyclic Redundancy Check Error

  1. Restart the computer.
  2. Reconnect external drives.
  3. Re-download the file.
  4. Request a new copy.
  5. Install the latest operating system updates.
  6. Scan the drive.
  7. Scan the drive using chkdsk.
  8. Install from Safe Mode.

What causes CRC error?

Common Causes and Solutions: CRC errors can be caused by a number of factors. Typically they are caused by either defective cable, transceiver (SFP), switch port, upstream network device, etc. To address this error, try replacing the cable or transceiver (SFP) and check the switch port and upstream network device.

What is FCIP protocol stack?

Fibre Channel over IP, or FCIP, is a tunnelling protocol used to connect Fibre Channel (FC) switches over an IP network, enabling interconnection of remote locations. From the fabric view, an FCIP link is an inter-switch link (ISL) that transports FC control and data frames between switches.

What is FCIP storage?

Fibre Channel over IP (FCIP or FC/IP, also known as Fibre Channel tunneling or storage tunneling) is an Internet Protocol (IP) created by the Internet Engineering Task Force (IETF) for storage technology.

What is FCIP switch?

What is the FCIP?

Related Post