What is the architecture of UMTS?

What is the architecture of UMTS?

UMTS system uses the same core network as the GPRS and uses entirely new radio interface. The new radio network in UMTS is called UTRAN (UMTS Terrestrial Radio Access Network) and is connected to the core network (CN) of GPRS via Iu interface.

What are the parts of a UMTS architecture?

As shown in the figure there are three main components in UMTS network architecture, User Equipments is composed of Mobile Equipment (ME) and USIM. Radio Access Network is composed of NodeB and RNC. Core Network is composed of circuit switched and packet switched functional modules.

What are the main elements of UMTS?

UMTS specifies a complete network system, which includes the radio access network (UMTS Terrestrial Radio Access Network, or UTRAN), the core network (Mobile Application Part, or MAP) and the authentication of users via SIM (subscriber identity module) cards.

How does UMTS network work?

UMTS relies on a packet-switched system. This allows cellular devices to send small “packets” of data to a destination, whereas circuit-switched networks require a point-to-point connection. In an old phone network, making a call meant reserving a line between the sender and receiver.

What is the difference between UMTS and LTE?

Key Differences Between UMTS vs LTE

The main difference is that UMTS supports 3G and LTE can support 4G communication with better speeds compared to the UMTS. LTE supports the flexible bandwidth with the range in 1.4 to 20 Mhz while UMTS uses the static fixed carrier of frequency 5MHz.

What is the meaning of UMTS?

Universal Mobile Telecommunications System
Universal Mobile Telecommunications System (UMTS)

What is UMTS and GSM?

GSM stands for Global System for Mobile Communications, UMTS stands for Universal Mobile Telecommunications System, and LTE stands for Long Term Evolution (of Mobile Networks). GSM uses TDMA and FDMA for its air interface, UMTS uses WCDMA, and LTE uses a combination of OFDMA and SC-FDMA.

What is the difference between UMTS and GSM?

UMTS stands for Universal Mobile Telecommunications System, developed based on 3GPP standards. Its network composed of three main parts UE (User Equipment), Radio Access Network (RAN) and Core Network.
…
Difference between UMTS and GSM :

Is UMTS GSM or CDMA?

What is UMTS? UMTS is the 3G standard for the GSM network. UMTS uses Wideband Code Division Multiple Access (W-CDMA) to increased voice capacity and provide faster speeds. The 3G GSM network does not use FDMA or TDMA technology to transmit information like 2G GSM; it uses CDMA technology.

Which is better UMTS or GSM?

GSM stands for Global System for Mobile communication. It is majorly used mobile communication system in the world.

Where is UMTS used?

UMTS offers a consistent set of services to mobile computer and phone users, no matter where they are located in the world. UMTS is based on the Global System for Mobile (GSM) communication standard.

Is UMTS a 2G or 3G?

UMTS (Universal Mobile Telecommunications Service) is a third-generation (3G) broadband, packet-based transmission of text, digitized voice, video, and multimedia at data rates up to 2 megabits per second (Mbps).

Is UMTS and CDMA same?

The WCDMA network (also known as UMTS) is based on CDMA technology and is one of the most popular air interfaces use in mobile devices. Just like CDMA systems, WCDMA uses a coding scheme to send and receive information.

Who uses UMTS?

Which is better UMTS or LTE?

What is the other name of UMTS?

Among the terrestrial systems of IMT-2000 family the most successful 3rd generation mobile cellular technology was developed by 3GPPTM under the name Universal Mobile Telecommunications System (UMTSTM).

What frequency is UMTS?

850 MHz (Band 5) / 900 MHz (Band 8) / 2100 MHz (Band 1) networks.

What is the advantage of UMTS?

Advantages of UMTS
Higher Information rates at lower incremental costs. This not as it were gives client a valuable phone but moreover deciphers higher incomes for the administrator.