What is a Bommer hinge?

What is a Bommer hinge?

Bommer is an industry leader with architectural grade butt hinges. These butt hinges made with high quality American steel and are unsurpassed in the industry. Bommer butt hinges come in a wide variety of finishes, sizes, and available options.

How do you adjust a Bommer spring hinge?

If the adjustment end is down turn the hex key counterclockwise to the desired spring tension adjust the spring hinge to the minimum tension required to close and latch the door.

How do you use a double action spring hinge?

Position on the left door with the tension holes. Up insert the tension rod into the lug. And turn towards the left to add tension we recommend starting with two holes of tension on the top hinge.

What are double acting spring hinges?

Double action spring hinges allow a door to open 180 degrees in either direction. The spring action returns door to center closed position. These hinges are great for any door you want to walk through in both directions and have the door come back to center automatically.

What is a spring hinge?

Spring hinges are fitted with a spring that slowly closes a door behind you. These hinges are adjustable so that you can choose how fast you want the door to close. Used in both residential and commercial applications, spring hinge doors also work as double-acting swing hinges.

What is a bomber door?

The bomb bay or weapons bay on some military aircraft is a compartment to carry bombs, usually in the aircraft’s fuselage, with “bomb bay doors” which open at the bottom. The bomb bay doors are opened and the bombs are dropped when over the target or at a specified launching point.

How do you release the tension on a spring loaded hinge?

Using a hex wrench, open the spring so you can see the tension pin. Then, remove the pin using pliers. You can then remove the hex wrench and allow the spring to naturally unwind. Once the spring is removed, you can take the other screws out and remove the hinge normally.

Can you adjust self closing hinges?

how to adjust a self closing door hinge – YouTube

How do you adjust the tension on a double action hinge?

You can adjust the tension higher or lower by removing the pin in each hinge and adjusting the spring tension. Too low and the doors will sag, if the tension is too high the doors will swing with a lot of force.

How many double action hinges do I need?

Preparing for Installation

Each door will need at least two double-barrel action hinges, one mounted on the top of the door and one mounted on the bottom. If a third hinge is required, it will be centered between the other hinges. These double-action hinges work due to tension pins nestled in the barrels of the hinges.

Is there a hinge that swings both ways?

Double action spring door hinges, also known as double-acting hinges or saloon door hinges, swing open in both directions and are fully self-closing.

How are spring hinges measured?

Know Your Way Around A Hinge: Hinges are measured from top to bottom and side to side. This bit is pretty straightforward. You’ll then need to be able to discern radius corners from square corners. A square corner has that sharp angle like a square.

Can a spring hinge keep door open?

Traditional self-closing devices like spring hinges do not provide hold open. Door closers can provide hold open, however, due to their bulky body and obtrusive arm cannot always be accommodated by door frames.

Is Bommer hinges going out of business?

The Board of Directors of Bommer has decided to cease and exit the manufacturing of all of our Builders Hardware items—including all of our hinges, pivots, and specialty hardware.

How do bomb bay doors work?

Why is my soft close hinge slamming?

If your soft close cabinet slams shut, it could be because the door is overlapping the neighboring door and hitting it before the soft-closing mechanism has a chance to fully engage.

How do you adjust the spring tension on a door closer?

On most heavy duty door closers an 11/16″ wrench can be used to turn the spring adjustment nut clockwise a full 360 degrees to increase the spring tension or rotate the spring adjustment nut counter-clockwise a full 360 degree rotation to decrease the spring tension.

How do you adjust a Bommer self closing hinge?

How To Set Bommer Adjustable Spring Tension – YouTube

How do you adjust the tension on a swinging door?

How to Adjust a Swing Door

  1. Locate the swing door’s adjustment mechanism.
  2. Pull out the pin holding the adjustment mechanism in place.
  3. Twist the adjustment mechanism to the right or left so a different hole lines up with the pin’s opening.
  4. Repeat Steps 2 and 3 for all the adjustment mechanisms.

What is the strongest type of hinge?

Ball Bearing Hinge
Ball bearing hinges are considered heavy-duty and durable, making them ideal for entry doors.

How much weight can a hinge hold?

Let’s start with the basics: a residential duty hinge can hold between 200 and 400 pounds. A commercial duty hinge can carry between 400 and 600 pounds, a heavy-duty hinge (also called a heavy duty LL) can carry between 600 and 1000 pounds, and cabinet doors? They can take about 80 pounds.

Can I turn any door into a swinging door?

You can turn any slab door into a swinging door using a pivot hinge, allowing you to match the door to the existing interior doors in your home.

What is double butt hinges?

Double butt hinges are suitable for narrow frame e.g. garden gates. Weld-on short strap hinges are designed to fit on steel gate frames and steel posts. Butt and weld-on short strap hinges are designed to fit on steel gate frames and timber posts.

How do I know my hinge size?

You should check the diameter of the hole in the door that your current hinge sits in – these are usually 26mm, 35mm or 40mm for larger hinges. It’s important to measure the hole in the door and not the hinge itself as the hinge may be slightly smaller.

How do I know what size hinge I need?

In general, you’ll want to use one hinge for every 30 inches of door height.

For example:

  1. Use two hinges for doors up to 60 inches tall.
  2. Use three hinges if the door is between 60 and 90 inches tall.
  3. For doors between 90 inches and 120 inches, use four hinges.

Related Post