How do I check my APC warranty?

How do I check my APC warranty?

Check my warranty status: http://www.apc.com/site/support/index.cfm/warranty-services/ups-factory-warranty-status/

How long is an APC UPS warranty?

American Power Conversion (APC) warrants its Smart-UPS (Products) to be free from defects in materials and workmanship for a period of three (3) years, excluding the batteries, which are warranted for two (2) years, from date of purchase.

How do I find my UPS APC serial number?

The serial number is not on the front of the unit, but can be found on a sticker on either the bottom or rear of your product. The location of the label as well as letter and number sequences will vary by model and product type.

How old is my APC battery backup?

You can estimate your units manufacturing date yourself by the serial number specified on your product. The third and fourth digits indicate the year your unit was manufactured, while the following 2 characters are the week your unit was manufactured.

How do I find the serial number on my UPS battery?

This can be found behind or on the bottom, back, or under the front cover of your UPS. The bar code label will look similar to the one below: The top row of the bar code sticker indicates the UPS model number. The bottom row indicates the UPS serial number.

Where is UPS serial number?

Find your serial number

The serial number should be located on a sticker on the back or side of the unit. You can also locate the serial number on the rating label on your UPS. The exact location varies slightly depending on the UPS model.

What is the default password for APC UPS?

The default username for your APC UPS is apc. The default password is apc. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

How do I know what model APC battery I have?

Locating Model & Serial Number on APC Smart-UPS – YouTube

How much does a UPS battery backup cost?

A UPS battery system costs $15,000 on average. You might pay as little as $10,000 or upward of $20,000 for a storage system containing multiple batteries. You’ll spend anywhere from $100 to $400 per unit, depending on the quality of your battery storage capacity.

What is the serial number?

Serial Numbers. A serial number (SN) is a number assigned to each individual product in order to distinguish that product from all others. The serial number is sometimes used only for warranty control and sometimes used for both warranty control and for version control.

How can I check a product serial number?

All Products
Serial numbers are often found on the back or bottom of the product unit. In some cases, the serial number may also be the unit’s barcode.

How do I connect to APC UPS?

Open the battery compartment. Pull the battery out half way. Connect the Red Battery Wire to the + Positive battery terminal. Push the battery into the compartment and re-install the cover.

How do I log into apc?

APC: First-time login to an APC device

  1. Configure your PC using a static IP address on the 192.168.
  2. Open a web browser and enter the default IP address of the AP device—192.168.2.66:
  3. Once the login page is loaded, enter the default administrator login information (login: admin; password: admin01) and click Login:

How long do APC batteries last?

three to five years
Most APC batteries should last three to five years. There are many factors which affect Battery life including environment and number of discharges.

How much does APC battery cost?

Compare with similar items

This item Replacement Battery for APC Back UPS ES 350 Replacement Battery – Compatible with APC Back-UPS ES 550VA
Customer Rating 4.5 out of 5 stars (2280) 4.5 out of 5 stars (365)
Price $1999 $21.97$21.97
Sold By Amazon.com Battery Supersite
Battery Cell Composition Lead Acid Lead-Acid, AGM

How many years does a UPS battery last?

3-5 years
There are a few different factors that can contribute to the lifespan of a UPS battery. On average, a battery will last anywhere from 3-5 years. But, some batteries can last much longer, while others might die on you in a very short amount of time. It all depends on the conditions and how you maintain your battery.

How long will a UPS last?

Factors Affecting Battery Longevity
When operating under ambient conditions (68° to 77° F), most UPS batteries have an expected lifespan of three to five years.

Why do you need a serial number?

Serial numbers identify otherwise identical individual units with many, obvious uses. Serial numbers are a deterrent against theft and counterfeit products, as they can be recorded, and stolen or otherwise irregular goods can be identified.

What is the purpose of serial number?

A serial number (SN) is a number assigned to each individual product in order to distinguish that product from all others. The serial number is sometimes used only for warranty control and sometimes used for both warranty control and for version control.

What is this serial number?

What is serial number example?

For example, the serial number 1234567 has seven digits, and begins with a one. For a lottery bond the serial number is an added incentive for the purchaser to buy the bond. On the right is a serial number string of up to four digits, with a separating horizontal line in the middle.

What is the default username and password for APC UPS?

Login Guide for APC UPS
According to our database the default username of your APC UPS router is apc and the corresponding password is apc. Enter the username and password, click on the login button and now you should have access to the user interface of the router.

What is the default IP address for APC UPS?

192.168.2.66
The default IP address is 192.168. 2.66 with a subnet mask of 255.255. 255.0.

How do I reset my apc username and password?

Press the Reset button a second time immediately while the LED is rapidly flashing – which will cause the LED to then go off – in order to reset the User Name and Password to their defaults temporarily (the default User Name and password are both apc).

How do I setup an apc network?

Connect to the UPS/device serial port using the correct APC configuration cable.

9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.

  1. Apply the port settings to establish the connection.
  2. Press enter 3-5 times to display the username prompt.
  3. Use the default username and password of “apc”.

Related Post