When an HP PC displays a 301 error What does it mean?

01/10/202201/10/2022 | Sarah HendricksonSarah Hendrickson | 0 Comment | 12:00 am

When an HP PC displays a 301 error What does it mean?

hard drive is failing

The 301 error message you are receiving indicates the hard drive is failing. There is not a timetable on when it will fail. Your best option is to back up your data an replace the hard drive. You will need the recovery discs for your computer to reload the operating system.

Why does my laptop say SMART hard disk error?

A system S.M.A.R.T. error means you should backup your data as soon as possible and maintain consistent backups. A S.M.A.R.T. warning based on excessive average temperature is common, and can sometimes be fixed by improving ventilation.

How do I fix my HP hard drive error?

2. Hard Disk Errorr

  1. Hard reset your HP laptop to restore the default configurations.
  2. Reset the BIOS default settings and check if the error message still occurs after the system reboot.
  3. Run HP Hardware Diagnostics in quick mode or extensive mode.
  4. Test the hard drive with another computer, or reset the hard drive.

How do I fix my SMART event hard drive?

Unfortunately the only solution to this problem is to replace the drive (Replace it immediately). Though instead of doing a reinstall, first perform a complete system backup (i.e., include all jobs and settings when creating the backup), then replace the failing drive, and finally restore the backup.

How do I hard reset my HP laptop?

Remove the battery from the computer. With the battery and power cord unplugged, press and hold the Power button for approximately 15 seconds. After you drain the capacitors, re-insert the battery, and then plug in the power cord. Leave peripheral devices disconnected.

How do I fix my HP laptop boot device not found?

How to Restore BIOS Default Settings.

  1. Turn off the computer and wait five seconds.
  2. Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings.
  4. Press f10 to Save and Exit.

How do I fix a hard drive error?

How to Fix Hard Drive Errors – YouTube

What causes SMART error?

For instance, a collection of bad blocks can be enough to cause a SMART error, or if the drive’s temperature gets too high because of poor ventilation or other environmental conditions, then SMART may issue an error.

How do I fix error 301 on HP?

How to fix SMART Hard Disk Error 301 in Windows?

  1. Fix 1. Restart your computer.
  2. Fix 2. Test hard disk from the BIOS.
  3. Fix 3. Run check disk.
  4. Fix 4. Check for file system errors.
  5. Fix 5. Run an automatic repair tool.
  6. Fix 6.
  7. Prevent websites, ISP, and other parties from tracking you.
  8. Recover your lost files quickly.

What is hard disk error 301?

SMART Hard Disk Error 301 is an unpredicted error message that indicates hard drive failure or severe drive corruption. This error is related to HP laptops, which comes with HP SMART check embedded in the firmware.

Can HDD SMART be reset?

SMART is meant to be an audit of the drives history and is maintained by the drive itself, so you cannot “reset” or “clear” SMART values. Hard drives have spare space for recovery reasons.

How do I enable F11 in System Recovery?

Select Troubleshoot > Advanced Options > UEFI Firmware Settings and click Restart to access it. 3. Then, you will access the Startup Menu window with System Recovery option. Press F11 and Enter to start the recovery process by its on-screen instructions later.

How do I restore my HP laptop to factory settings without a disk?

Disconnect any external devices including USB printers and USB memory drives, but make sure the laptop is plugged into AC power. Turn on the laptop and immediately press the F11 key repeatedly until System Recovery starts. On the Choose an option screen, click “Troubleshoot.” Click “Reset this PC.”

How do I bypass boot device not found?

1. How do I fix boot device not found?

  1. Hard reset your computer and hard drive.
  2. Reconnect your hard drive.
  3. Restore BIOS default settings.
  4. Check and fix bad sectors.
  5. Check and rebuild MBR.

What do you do if your hard disk fails to work?

Reboot the PC and see if the problem persists. Next, plug your drive with the old cable into a different SATA or IDE port, if applicable, or use an external disk drive enclosure. Again, reboot the PC and test it. Create a Windows Recovery Tool on a USB drive and boot into it to scan your drive for errors.

Can a hard disk be repaired?

Hard drive repair is possible, but they should NOT be reused after a recovery! Of course, HDDs can be repaired! However, a repaired HDD should not be reused, but rather, have its contents recovered immediately and then be discarded as it cannot be trusted to work into the future.

How can I repair my hard drive without formatting?

How to Recover Files From External Hard Drive Without Formatting

  1. Scan Your Computer for Viruses.
  2. Use CHKDSK to Fix File System Errors.
  3. Replace Corrupted Files with SFC.
  4. Recover Your Files with Data Recovery Software.

How do I fix HP SMART HDD error 301?

Follow the steps below to restore your data from an HP hard drive showing SMART disk error 301: Remove the hard drive from the system and use an use an HDD enclosure to connect your hard drive to a different Windows PC. Download, install and run the Stellar Data Recovery Standard software.

How do I check my hard drive in BIOS?

Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS Setup menu. Use the Right Arrow or Left Arrow keys to navigate through the menu selection to find the Primary Hard Drive Self Test option.

What causes a SMART error?

How do I fix SSD errors?

How to Repair SSD in Windows 10 Manually

  1. Press Win+X keys and choose “Device Manager”.
  2. Expand “Disk drives” > right-click the SSD drive > select “Properties”.
  3. Run the SSD firmware update tool and follow the on-screen instructions to complete the process.

What does F12 do when booting?

The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.

Does F11 reset your computer?

Rather than reformatting your drives and restoring all your programs individually, you can reset the entire computer back to its factory settings with the F11 key. This is a universal Windows restore key and the procedure works on all PC systems.

How do I master Reset my HP laptop?

There are two ways to access the reset option:

  1. Click on the Start menu and choose the “Settings” option. This looks like a cog wheel, and it is where you will access all of the major settings on your laptop.
  2. In the search bar, type “reset.”
  3. From there, choose the “Reset this PC” option once the results have popped up.

How do I boot into BIOS?

Get into the UEFI / BIOS setup menu and make changes.
…
BIOS Keys by Manufacturer

  1. ASRock: F2 or DEL.
  2. ASUS: F2 for all PCs, F2 or DEL for Motherboards.
  3. Acer: F2 or DEL.
  4. Dell: F2 or F12.
  5. ECS: DEL.
  6. Gigabyte / Aorus: F2 or DEL.
  7. HP: F10.
  8. Lenovo (Consumer Laptops): F2 or Fn + F2.

Related Post