How do you service a Suntour coil fork?

How do you service a Suntour coil fork?

And again with the special tool just unscrew this unscrew it counterclockwise. And this whole part comes out just like this. So this is what the little lockout part looks like out of the fort.

Do Suntour forks have oil?

All SR SUNTOUR forks are lubricated from our factory using proprietary grease. This grease can break down over time and have an oil-like appearance.

How do you service a Suntour XCM forks?

There just push it to one side or the other it doesn’t really matter which side you push it to and then you can just slide the sleeve right out just like that. Okay.

How do I know what Suntour fork I have?

If your fork is from China you can identify your fork as follows: On the left side of the lower you should find a sticker. This is for model identification. The needled number on the crown is for production date identification.

How do you soften a fork on a suntour?

Use a flathead screwdriver and be careful to not remove the cap with excessive force. Then use a 5mm HEX key to adjust the knob; some models use a slotted head that can be adjusted with a coin. For a firmer ride, adjust the screw clockwise a few clicks; for a softer ride, adjust the knob counter-clockwise a few clicks.

What is the difference between Suntour XCM and Xcr?

Registered. XCR is really similar to the XCM but is a lighter build, which, given the coil, functionally makes them very close. The XCT is almost a hybrid fork. The build is much less dialed, and it isn’t really meant for riding where the front wheel spends much time off the ground.

Is Suntour XCM good?

4.0 out of 5 stars Budget fork offering good quality, just don’t expect Rox Shocks and you’ll be satisfied. Great product at a budget price. I wasn’t expecting a top end fork at this price however I was pleasantly surprised with the quality and ride that this fork has.

What is the difference between SunTour XCM and Xcr?

What does SR SunTour stand for?

Sakae Ringyo Company

SR SunTour is a Taiwanese manufacturer of bicycle components, formed in 1988 when Osaka based SunTour (Maeda) went bankrupt and was purchased by Sakae Ringyo Company (abbreviated S.R.), a major Japanese maker of aluminum parts, particularly cranks and seat posts.

Can you adjust SR SUNTOUR forks?

The spring rate of the Suntour NEX suspension fork can be adjusted for a softer or firmer ride. The adjustment knob is located on the left side of the suspension fork. First, remove the cap that covers the adjustment knob. Use a flathead screwdriver and be careful to not remove the cap with excessive force.

Which is better Xcr or Xcm?

XCR is really similar to the XCM but is a lighter build, which, given the coil, functionally makes them very close. The XCT is almost a hybrid fork. The build is much less dialed, and it isn’t really meant for riding where the front wheel spends much time off the ground. That said, yes, they are all similar.

Is Suntour XCR good?

5.0 out of 5 stars Smooth Riding Ahead. Excellent fork, saved a few ounces from the factory one. Very smooth ride and takes a beating. I don’t do any hardcore trails but do ride off road quite a bit and for a big guy (260lbs) this shock works perfectly!

Is Suntour XCT or Xcm better?

Is Suntour XCM an air fork?

This XCM 20 Air has all the important features of our adult forks just in a pint sized package. Top quality fit and finish that you expect with SR SUNTOUR products in a light weight chassis. Air adjustment allows to custom set the fork for riders of any weight or skill.

When did suntour go out of business?

SR SunTour is a Taiwanese manufacturer of bicycle components, formed in 1988 when Osaka based SunTour (Maeda) went bankrupt and was purchased by Sakae Ringyo Company (abbreviated S.R.), a major Japanese maker of aluminum parts, particularly cranks and seat posts.
…
SunTour.

Does suntour make good shocks?

The higher-level Suntour forks and shocks are very good. Don’t judge them by the bottom budget forks.

Who makes Suntour forks?

Mori Industries Inc.
(with manufacturing plants in Taiwan) bought Sakae Ringyo Company. In 1988 the SunTour name was purchased and revived by Sakae Ringyo Company, (now owned by Mori Industries Inc.) with a capital investment of 45,000,000 NT$ in Tokyo, Japan, thus becoming SR-SunTour.

Is Suntour XCR 32 an air fork?

The XCR 32 LO R AIR is SR SUNTOUR’s first offering of an air sprung fork in our XC category of suspension forks. It features externally adjustable rebound, and air spring for a more precise set up and a hydraulic lockout that can be used on the fly.

Is SR SUNTOUR XCR good?

Is Xcm better than XCT?

XCR is really similar to the XCM but is a lighter build, which, given the coil, functionally makes them very close. The XCT is almost a hybrid fork. The build is much less dialed, and it isn’t really meant for riding where the front wheel spends much time off the ground.

Which is better air fork or coil?

If you ride cross country, stick with air forks – they are easier to use, and provide good performance across all but the extremes. If your bike takes some big hits and impacts, use a coil fork – they are stronger and you cannot beat the coil setup for bigger hits.

Does SunTour make good shocks?

Who makes SunTour forks?

Are SunTour suspension forks good?

Are Suntour suspension forks good?