What does ER70S-3 mean?
Pinnacle Alloys ER70S-3 is a premium copper-coated, solid electrode designed for gas metal arc welding of a wide selection of carbon steels, such as sheet metal, plate, and automotive components. This electrode should be used in single or multiple pass applications with a yield strength range of 55,000-75,000 psi.
What does ER70S mean?
Solid wire: An overview
As an example, for a commonly used solid wire — AWS ER70S-6 — the “ER” indicates that the filler metal is an electrode or rod; the “70” signifies that it has a tensile strength of 70,000 pounds per square inch (psi); and the “S” means that it is a solid wire.
What is the meaning of ER70S-2?
Pinnacle Alloys ER70S-2 is a copper-coated solid wire designed for welding carbon and carbon-manganese steels with tensile strength up to 73,970 psi (510 MPa).
What is the difference between er70s3 and er70s6?
ER70S-6 is more suitable for weld rimmed steel (Steel with more impurities) or on rusty surfaces or material with mill scale compared to ER70S-3 due to the higher amount of deoxidizers (manganese and silicon) present in the wire.
What ER70S 4?
ER70S-4 TIG Double De-Oxidised Welding Rods are It is designed for welding of mild and high tensile steel or 490 N/mm2 grade steel. It is suitable for root pass welding of pipes and all welding thin plates.
What does ER308LSI mean?
Alloy Type: A5.9, STAINLESS STEEL Bare, Cored and Stranded Electrodes. ER308LSI has the same analysis as ER308L but with a higher silicon content. The higher silicon content improves arc stability, bead appearance and wetting action.
What ER70S-6?
DESCRIPTION: Pinnacle Alloys ER70S-6 is a premium carbon steel electrode formulated for welding carbon steels with a yield strength range of 55,000-70,000 psi. Pinnacle Alloys ER70S-6 is well suited for steels containing medium to high levels of mill scale and mild amounts of contaminants.
What is ER80S D2?
ER80S-D2 is a mild steel solid wire used in situations where porosity is a problem or when you must counter high-sulfur or carbon content in your base metal. It contains high levels of manganese and silicon to provide good wetting as well as good rust and scale tolerance.
What is ER308L used for?
Pinnacle Alloys ER308L is utilized to weld base metals of similar composition, including AISI 301, 302, 304, 304L, 308, and 308L. It is well suited for welding chemical, food processing, brewery, and pharmaceutical equipments.
What does ER4043 stand for?
ER4043 (commonly referred to as ALSi-5) is a 5% Silicon Aluminum filler metal that is used primarily for welding Aluminum Alloys 3003, 3004, 5052, 6061, 6063 and Casting Alloys 43, 355, 356, and 214. ER4043 has a melting range of 1,065°F – 1,170°F.
What is the f number for ER70S 2?
F-Number for ER70S-2, ER70S-3, and ER70S-6 is F. Number 6. F-Number for E309L, E308L, and other austenitic stainless steel welding consumables is 4.
What is S6 wire?
The S6 wire contains more manganese and silicon. These elements act as scavengers that allows us to weld in steel that is not perfectly clean. It will perform better than S3 over mild amounts of mill scale, oil, dirt and rust.
What is ER70S welding wire?
Weldporn® AWS Class ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel.
What does ER309L mean?
DESCRIPTION: Pinnacle Alloys ER309L is generally used for welding similar alloys in wrought and cast form. This wire is also utilized to weld Type 304 and similar base metals, where severe corrosion conditions exist, as well as in dissimilar welds for joining 304 to carbon steel or the clad side of 304 clad steels.
What does ER316L mean?
ER316L filler metal is primarily used for welding low carbon molybdenum-bearing austenitic alloys. This low carbon alloy is not as strong at elevated temperatures as ER316H. Deposited Chemical Composition % (Typical) C = 0.015.
What kind of wire is ER70S-6?
solid steel MIG wire
Weldporn® AWS Class ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel.
What is E7018?
E7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on AC or DC reverse polarity welding current.
What ER70S 6?
What is ER80S B2?
Pinnacle Alloys ER80S-B2 is a low alloy copper-coated solid wire with 1.25% Cr and 0.5% Mo content to be used for the welding of creep resistant steel. The chemical composition of the wire conforms to AWS specification.
What is the difference between ER308 and er308l?
Alloy ER 308L is ideal for welding Types 304L, 321 and 347. This classification is the same as alloy ER 308, except for the carbon content. The carbon content is held to a maximum of 0.03% to reduce the possibility of intergranular carbide precipitation.
What is the difference between ER4043 and ER5356?
ER5356 is a stiffer wire than ER4043 and is used when more rigid, higher strength properties are needed. Because it has a higher magnesium content, ER5356 wire has a faster melt-off rate than ER4043. For this reason, you need to feed ER5356 at a faster speed for the same diameter electrode wire.
What is F-Number in ASME?
An F-Number is a numeric designation assigned to a group of filler metals. ASME Section IX Table QW-432 lists the assignment of filler metals into their F-Number grouping.
What is S6 MIG wire?
MIG (GMAW) AWS: ER70S-6. SuperGlide® S6 from Lincoln Electric is a premium bare, mild steel MIG wire best for welding on metals with a medium to high presence of millscale.
What a Number is ER70S-6?
The A-Number of ER70S-6 as per ASME Section IX is ‘1’ . Detailed chemical properties of ER70S-6 and other equivalent filler wires specified in AWS A5. 18 are given below.
Is ER70S-6 flux core?
ER70S-6 – Solid core – MIG & Flux-Cored Welding Wire – Filler Metals – Welding – Products.