What engine came in 1980 Trans Am?

What engine came in 1980 Trans Am?

The Trans Am Turbo: What might have been?

What engine was in the 81 Trans Am?

The ’81 SE T/A Was A Great Chassis And Body In Search Of Horsepower-This One Found It With A 505ci IA II Engine. As you would expect, by the ’81 model year, Pontiac had the Second-Gen styling, suspension, and brakes dialed in.

How much horsepower did the 6.6 liter Trans Am have?

The 1979 Pontiac Trans Am T/A 6.6 is powered by a 400 cubic inch (6.6) liter Pontiac V8 producing a claimed 220 bhp at 4,000 rpm and 320 lb ft of torque at 2,800 rpm. It was hailed for its handling and performance ability, and it remains a highly desirable late-70s muscle car.

What was the biggest motor in a Trans Am?

Of the three 455 cubic inch V8 engines offered by General Motors in 1970, the Pontiac 455 took the most unusual route to the market.

Is the Pontiac 455 a big block?

That’s right, the 455 was not a big block because Pontiac never had a big block. Or a small block. Throughout its entire existence, Pontiac only ever manufactured a single V8 engine family!

How much horsepower does a Pontiac 301 have?

210 hp

Unsourced material may be challenged and removed. The Pontiac 301 Turbo is an engine that Pontiac produced for the 1980 and 1981 Trans Am. It was a V8 engine with a displacement of 301 cubic inch which produced an officially factory rated 210 hp (157 kW) and 345 lb⋅ft (468 N⋅m) of torque in 1980.

What transmission came in a 1981 Firebird?

1974 – 1981 Firebird Four Speed Transmission, Borg Warner T-10. Complete newly rebuilt Borg Warner four speed T-10 transmission for your Firebird or Trans Am.

What was the most powerful Pontiac engine?

The rear-drive G8, hailed here at AutoWeek and elsewhere in the wheeled world in its original rear-drive, 361-hp, 6.0-liter V8 form, now has a mighty 415-hp 6.2-liter V8 driving those rear wheels, making it the most powerful Pontiac ever.

How much horsepower can a Pontiac 400 make?

Back in the day, the most powerful 400 (Ram Air IV) made by Pontiac put out 370 hp (GTO), so 512 hp is certainly a ton more performance; all in, it’s a package that looks deceptively stock.

Is Pontiac 455 and 400 the same block?

Functionally, these blocks are very much the same, with only minor structural differences, and virtually all were drilled and tapped for four-bolt caps (though only the 19701972 455 H.O. engines were equipped with them).

How much HP can a Pontiac 455 make?

generates 433 hp at 4,800 rpm and 517 lb-ft at 3,500 rpm.

Is Pontiac 301 a good engine?

The 301 is a weak motor and one of Pontiacs worst. mods/parts are darn near non-existant for that motor.

What was the first Pontiac V8?

The V8 engine was introduced for the 1955 model year as the “Strato Streak”. Not long before the model year introduction, Pontiac management decided that the entire line would be V8-powered. This was based on results of over 1 million test miles, which was unheard of at the time.

How much horsepower does a 1981 Firebird have?

In 1981, its final year on the market, the V8-powered Firebird delivered between 140 to 200 horsepower.

How much is a 1981 Pontiac Firebird worth?

Vehicle Valuation Analysis

How much HP can a Pontiac 400 make?

What is the most powerful Pontiac engine?

How much HP can you get out of a Pontiac 400?

How much horsepower can you get out of a Pontiac 301?

The Pontiac 301 Turbo is an engine that Pontiac produced for the 1980 and 1981 Trans Am. It was a V8 engine with a displacement of 301 cubic inch which produced an officially factory rated 210 hp (157 kW) and 345 lb⋅ft (468 N⋅m) of torque in 1980.
…
Pontiac 301 Turbo.

What was the fastest Pontiac motor?

Overview Of The Fastest Pontiac Model Ever: The 2006 Pontiac GTO. The 2006 Pontiac GTO is a fifth-generation Pontiac GTO. It is offered with only a single engine option available — the monstrous 6.0-liter naturally aspirated LS2 V8 engine that generates 400 horsepower at 5,200 rpm and 400 pound-feet of torque.

What is a 1988 Pontiac Firebird worth?

Vehicle Valuation Analysis

Did Pontiac have a big block?

Pontiac differed from other GM Divisions and most other manufacturers in producing only a single small block V8, rather than adding a larger big block to its line-up. The external dimensions of all their V8s, from 326–455 cu in (5.3–7.5 L) were the same. Engine displacement is a function of bore and stroke.

How much does a 1988 Pontiac Firebird weight?

Features

What engine is in a 1982 Pontiac Firebird?

What engine is in Pontiac Firebird Trans Am 1982 5.0 V8 HO 5-speed? The Pontiac Firebird Trans Am 1982 5.0 V8 HO 5-speed has a V 8, Petrol engine with 5001 cm3 / 305.2 cu-in capacity.

How fast is a 1989 Firebird Formula?

According to ProfessCars™ estimation this Pontiac is capable of accelerating from 0 to 60 mph in 6.5 sec, from 0 to 100 km/h in 6.8 sec, from 0 to 160 km/h (100 mph) in 17.3 sec, from 0 to 200 km/h (124 mph) in 32.4 sec and the quarter mile drag time is 15 sec.