Are Alumacraft jon boats welded or riveted?
For instance, Alumacraft’s Jon boats are welded, and most of their tournament boats are riveted. Both methods are durable options when they are properly done. One advantage Alumacraft currently has is that most of their hulls are one piece, so there is no seam in the center (the ribs are still riveted).
Where are Alumacraft boats built?
Saint Peter, MN
We moved to a brand new 100,000 square-foot plant in Saint Peter, MN. Focusing on the decades of craftsmanship and expertise our workforce had developed in manipulating aluminum to shape our early boat models, we began producing stretch-formed hulls, consisting of two sheets of aluminum.
Is Alumacraft still in business?
Alumacraft is known as one of the first companies to build aluminum boats for fishing and recreation with a truly innovative design for the times, and the introduction of the revolutionary 2Xb hull. It is now employing over 250 people in two U.S. locations and has a network of 275+ dealers around the globe.
What company makes Alumacraft boats?
BRP
Evinrude motors have been made for more than 110 years and Alumacraft, which was one of the first to build aluminum boats, has thrived since 1946. BRP said Alumacraft had revenue of about $100 million in 2017.
How long will a Alumacraft boat last?
30-40 years
A very high material strength, good corrosion resistance, and other advantages of aluminum makes it possible for an aluminum boat to easily live 30-40 years. This longevity also results in a low impairment and a high resale value.
How long will a riveted aluminum boat last?
Aluminum boats are great value because they have a longer lifespan than any other craft. Typically, an aluminum boat can last 30-40 years with regular and little maintenance. Aluminum doesn’t rust over time, and while it can corrode, it will last a lifetime if it is adequately maintained.
Does Alumacraft make Jon boats anymore?
The closing of the factory, known for its production of flat-bottom aluminum jon boats, was a tie-in to the decision by its owner, BRP of Valcourt, Quebec, to halt production of Evinrude outboard motors. BRP, also known as Bombardier Recreational Products, announced that decision Wednesday afternoon.
Do Alumacraft boats have wood in them?
All Alumacraft boat models (except for V16, V14 and the T’s) have ALL-ALUMINUM transoms!!
How much does a 16 ft Alumacraft weight?
V-16 Tiller
| Weight | 285 lbs (129 kg) |
|---|---|
| Length Overall | 16′ 7” (5.1 m) |
| Max HP | 25 HP |
| Beam | 70” (1.8 m) |
| Transom Width / Height | 62”/20” (1.6 m/0.5 m) |
Are aluminum boats good for saltwater?
Saltwater Corrodes Aluminum
Saltwater can and will corrode aluminum. This does not mean that aluminum boats aren’t ideal for ocean use, but it does mean that they will need a little special attention. The way salt damages aluminum is a process called galvanic corrosion.
Is salt water bad for aluminum boats?
Saltwater can and will corrode aluminum. This does not mean that aluminum boats aren’t ideal for ocean use, but it does mean that they will need a little special attention. The way salt damages aluminum is a process called galvanic corrosion.
Do riveted boats leak?
Rivets leak because wear and tear eventually loosens them, causing gaps where water can get through. There are a couple of ways to find leaking rivets.
What boats last the longest?
Due to their durability, steel boats last longer than any other boats.
Does salt water damage aluminum boats?
Can you take an aluminum jon boat in saltwater?
You Bet! Many saltwater anglers have made the switch back to aluminum Jon boats after “having a go” with bigger fiberglass vessels in previous years. Aluminum costs very little to operate and can go almost anywhere, given the right weather conditions.
How thick is the aluminum on a Alumacraft boat?
The thickness of the aluminum sheet is optimized for boat size. Boats with full bow-to-stern double plating have either two . 080″ sheets (. 160″ combined thickness) or two .
Does Alumacraft use wood transom?
How many people can fit on a 14ft Jon boat?
An average 160 pounds (72.5 kg) heavy and 14 feet (4.3 m) long Jon boat without an engine can hold 610 pounds (277 kg) of gear and passenger. The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
How many people fit in a 14 foot Jon boat?
14-foot Jon Boat (4 m)
Crew: 3 passengers easily. Throw in a medium gear load or a child. Top Speed: Up to 20+ mph (32+ kph). Fast enough for most water sports.
How long do aluminum jon boats last?
But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime. Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.
How do you keep salt from corrosion on aluminum boats?
Paint the hull. The best way for stopping corrosion on an aluminum boat is to paint the hull. Bottom paint prevents fouling. Be sure to paint up to the water line, and patch nicks or chips as soon as possible.
How do you keep aluminum boats from corroding?
Is flex seal good for aluminum boats?
Does flex seal work on aluminum boats? Yes, it does. Some products from Flex Seal can adhere to various surfaces, which include aluminum. The exemptions are plastic and rubber.
What type of boat requires the least maintenance?
Most pontoon boats are powered by low maintenance outboard engines. Many of them are made of aluminum so they’re durable and relatively lightweight. These boats make an excellent starter boat for a family.
How do I protect my aluminum boat from salt water?
Protect aluminum boats from saltwater corrosion by applying anti-fouling paint, which is specially designed for aluminum vessels. The anti-fouling paint will help keep the aluminum boat from getting corroded by salt, which can lead to eventual rusting.