How do I access Linksys WAP54G?

How do I access Linksys WAP54G?

Connect to a Router

1. Connect the Linksys WAP54G device to your Internet modem using the Ethernet cable.
2. Type “admin” — without quotation marks — in the password field. Leave the user name blank. Click “OK” to access the WAP54G setup page.

What is the default IP of Linksys WAP54G?

Type 192.168. 1.245 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Linksys WAP54G is (blank).

How do I find the IP address of my Linksys router?

Right-click the Start button then select Command Prompt. Step 2: On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router’s IP Address.

How do I reset my Linksys wireless G access point WAP54G?

Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle. Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid.

What is Linksys wireless G access point?

Amazon.com Product Description The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network.

What is difference between router and access point?

The router acts as a hub that sets up a local area network and manages all of the devices and communication in it. An access point, on the other hand, is a sub-device within the local area network that provides another location for devices to connect from and enables more devices to be on the network.

What is the default IP address for a Linksys router and password?

Most Linksys brand routers have a default password of admin and a default IP address of 192.168. 1.1, but some differ, as you can see in the table below. Once in, change the default router password from admin to something more secure.

How do I login to my Linksys router?

Accessing your Linksys Smart Wi-Fi through a web browser

1. Launch a web browser.
2. Enter your router’s default IP address, “192.168.
3. Enter your Router Password then click Log in.
4. Launch a web browser and enter “linksyssmartwifi.com” in the Address bar then press [Enter].

How do I locate my IP address?

On an Android/tablet

Go to your Wifi network settings, then select the network you’re connected to. You’ll find your IP address along with the other network information.

How do I access my Linksys router locally?

Step 1:

1. Launch a web browser.
2. In the Address bar, enter your router’s IP Address or “myrouter. local” then press [Enter].
3. NOTE: The default IP Address of the router is 192.168. 1.1.
4. When the Linksys Smart Wi-Fi Account login appears, click the local access link below the Sign In section.

What happens if I Reset my Linksys router?

Once you reset the router, the settings will be reverted to its factory defaults. All of the customized settings of the router (Wi-Fi name (SSID), wireless security, etc.) will be erased. IMPORTANT: If you want to restore the router’s original settings without re-configuring it, you have to save a backup file.

How do I Reset my Linksys router to default settings?

1 Factory Reset

1. Ensure the router is ON.
2. Using a paper clip, push and hold the Reset button.
3. Hold the reset switch for 10-15 seconds.
4. Disconnect and reconnect the router’s power adapter.
5. Once it fully reboots, you can use the default username and password to connect the device.

How do I setup my Linksys router as an access point?

How to change a Linksys router to AP mode

1. Connect a computer to the Linksys router and launch a web browser.
2. Visit the following router configuration page:
3. You are prompted to enter a username and password.
4. Click on Advanced settings > Administration > Operation Mode.

How do I setup my Linksys wireless G router?

How to Set Up a Linksys WRT54G Wireless G Router

1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
2. Step 2: Connect Your Computers.
3. Step 3: Connect the Power.
4. Step 1: Log In.
5. Step 2: Open Wireless Settings.
6. Step 3: Name the Network.
7. Step 4: Set Up Security.

Does access point have IP address?

Wifi access points need not have an IP address, any more than wired switches and hubs do. However a large number do, as they also act on the IP layer as DHCP servers and network gateways.

Does a wireless access point need to be connected to a router?

A Wireless Access Point (WAP) allows several devices to connect via WiFi to a single network. The wired equivalent is a switch. But unlike a switch, a WAP does not need to be wired to the router. Access Points connect via wired Ethernet to a switch, or a switch port on a router, then serve up WiFi.

How do I access my Linksys router admin?

How do I log into my 192.168 1.1 IP address?

First, type 192.168.1.1 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.

Why can’t I log into my Linksys router?

To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router’s settings through Linksys Connect.

How can I see all IP addresses on my network?

How to Find All IP Addresses on a Network

1. Open the command prompt.
2. Enter the command “ipconfig” for Mac or “ifconfig” on Linux.
3. Next, input the command “arp -a”.
4. Optional: Input the command “ping -t”.

How do I get into my routers settings?

Tap on the network name. Look for a ‘gateway’, ‘router’ or other entry in the list.
…
Find router IP address on Android or iOS

1. Tap on Wi-Fi.
2. Make sure your phone is connected to your router’s Wi-Fi network.
3. Tap the ‘i’ to the right of the network name.
4. Your router’s IP address is shown next to ‘Router’

How can I access my Linksys router without an app?

Does unplugging a router reset it?

To manually reboot your router, unplug it (you can remove the power cord from the wall outlet OR from the power port on the back of the router). Wait one minute, and plug it back in.

What happens if I push the reset button on my router?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

What happens if I press reset on my router?

Note: Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.