How do I fix Flo error on Sundance spa?
You can go back and flip your breaker in the on position let the spa run for about fifteen or twenty minutes very often it’ll clear the flow message the spot will begin to heat.
What does Flo mean on my Sundance spa?
Flow Switch
FLO. Stands for Flow Switch. Means that the flow switch is malfunctioning or the flow of water is being inhibited. The heater is deactivated and filter/circulation may be deactivated, also. Check for clogged filter and proper water levels in the hot tub.
What do you do when your hot tub says Flo?
The most common reasons for the FLO error message are dirty filters, a low water level, clogged circulation pumps or bad sensors. The first thing you should do is check your tub’s water level. Top it off and see if this fixes the problem. Reset the tub GFI breaker to see if the error clears.
Is Sundance a good hot tub brand?
Sundance Spas has been in business since 1979 and has a decades-long history of selling high-quality hot tubs. Their products feature durable shells, making them an excellent choice for those who live in harsher climates. Sundance offers five series of spas, which range in features and price.
How do I reset my Sundance hot tub?
How to RESET your HOT TUB – YouTube
Can you bypass the flow switch on a hot tub?
“Jumping Out” the pressure switch refers to placing a jumper wire between the two spade terminals or brass screws on the pressure switch. By connecting a wire between the two “in” and “out” terminals, you essentially bypass the switch itself.
How do you reset the flow sensor on a hot tub?
Fix a Flow Sensor Error on Your Hot Tub and Fix Your Spa Not Heating
How long do Sundance hot tubs last?
Sundance Spas can last up to 20 years if properly maintained. Sundance Spas come with a warranty that covers five years on parts and labor and 10 years on the shell.
How are Sundance Spas rated?
Sundance Spas make excellent hot tubs. They are the largest acrylic hot tub builder globally and have an A+ rating with the BBB. They have been owned by the same company as Jacuzzi since 1998. But there are some complaints on the BBB site.
Where is the reset button on a Sundance spa?
The reset button is usually located on the spa pack – the box that controls all the functions of your hot tub, such as heating and filtration timing, and turns the pump on and off. To get to the spa pack, you must remove the side panel of the cabinet, and you will see it attached to the heater tube.
Where is the reset button on my hot tub?
Locate the spa’s high-limit reset. This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple.
How do I know if my flow switch is bad?
”No Flow” light coming on probably means the cell’s flow switch has gone bad. Verify that the pump is running first (water is actually flowing through the line). If “No Flow” stays on the flow switch needs replacing. ”Flow” LED turning from green to red means water flow through the system has been disrupted.
How do you reset a flow switch?
Turn the unit off and unplug it from the power source for 30 seconds. This resets the spa’s control panel and will make the switch work again. If this does not work, turn the unit off again before trying any other troubleshooting techniques.
How do I know if my flow switch is working?
How to Test a Flow Switch
- Put cover on the flow switch and turn power on. Video of the Day.
- Start flow through the designated system.
- Observe flow in operation to determine if flow switch is working properly.
- Repeat this process many times to ensure flow switch and designated system is in fact working accurately. Tip.
Are Sundance and Jacuzzi the same company?
In January of 2019, Investindustrial VI L.P., an investment group, made the move to acquire Jacuzzi Brands. This acquisition has allowed them to become the parent company for Jacuzzi Brands and, of course, Sundance® Spas.
Are Sundance Spas made by Jacuzzi?
Who is Investindustrial? In January of 2019, Investindustrial VI L.P., an investment group, made the move to acquire Jacuzzi Brands. This acquisition has allowed them to become the parent company for Jacuzzi Brands and, of course, Sundance® Spas.
How do I reset my Sundance hot tub control panel?
How do I reset my hot tub control panel?
You can reset a hot tub control panel by switching it off, waiting for between 10 and 20 seconds and then switching it back on again. If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is.
Where is the GFCI reset button on my hot tub?
How to reset the GFCI breaker for your hot tub. – YouTube
How do you test a flow switch?
How do you adjust the flow switch on a hot tub?
Turn the screw slowly to the left, counter-clockwise, to reduce the minimum required pressure. Turn it slowly just barely beyond the point where the heater turns On. Other adjustable pressure switches have an Adjustment Wheel that you turn with thumb and finger.
How do you test a Sundance flow switch?
Test the Flow Switch Operation: With the circ pump and the main pump off, test switch operation with an ohmmeter in the continuity position, test for continuity across switch terminals.
…
Troubleshooting Steps:
- Remove filter and allow air to bleed out of filter.
- Check for proper water level.
- Check for clogged filter.
Where is the reset button on hot tubs?
Most hot tubs are fitted with a reset button in the event of overheating or a power surge. The button is typically located on the side of the control box behind the hot tub’s removable panel on the front side.
How do I know if my hot tub control panel is bad?
Control Panel is Not Working
If only a part is not working, look for error messages or blinking lights. As a first step, reset your breaker. If the problem persists, turn the breaker off and disconnect the panel to examine the circuit board. Turn the power on and check if the hot tub heats up or starts to filter.
What happens when a GFCI won’t reset?
If you test and reset your GFCI outlet, but it still won’t stay reset, a good idea is to check the breaker box to make sure the circuit breaker hasn’t tripped. Try resetting the outlet. Once you reset the outlet and it still doesn’t reset, moisture buildup in the wiring or outlet may be the culprit.