How do I identify my Kohler toilet seat?
KOHLER plastic toilet seats have a KOHLER logo molded into the bottom of the toilet seat ring. As of October 2019, most KOHLER plastic toilet seats have the model number and color code printed on the underside of the toilet seat hinge. The seat must be removed from the toilet to view the model number.
How do you replace a one piece Kohler toilet seat?
Using a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchor spins and the bolt cannot be unthreaded. Press the teeth of the stabilizer.
How do you replace a Kohler elongated toilet seat?
For this project you’ll need a flat blade or Philips screwdriver first insert the tabs into the notches on the back of the seat with the plus sign facing the front of the bowl.
Are toilet seats a universal fit?
Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
How do I know my toilet seat model?
Identify Toilet Model Number from Serial Number
- On the back or side of the inside of the toilet tank.
- On the back of the toilet tank.
- On the underside of the toilet bowl.
Where is model number on toilet seat?
All toilets have model numbers which are typically located on the underside of the tank lid.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings
There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you replace a toilet seat on an enclosed toilet?
bathstore: How to replace a toilet seat – YouTube
Will a Kohler toilet seat fit an American Standard toilet?
Chruch, Olsonite and Bemis all fit Kohler, American Standard, Eljer normal-style toilets. Typically the brand of the seat is not the brand of the toilet. Exceptions are some seats from Kohler and American Standard toilets which are branded Kohler or American Standard.
How do you replace a toilet seat on a skirted toilet?
How to Install a Bidet Toilet Seat on a Skirted Toilet | BidetKing.com
How do I know which toilet seat will fit my toilet?
Choosing the Correct Size Toilet Seat – YouTube
How do I find the model number of my toilet seat?
Where is KOHLER model number?
KOHLER and STERLING product model numbers may be found in several places: Product label on the box in which the product was packaged. Product literature, such as a homeowners guide, installation instructions, or specification sheet. An invoice or receipt from the place of purchase.
What size of toilet seat do I need?
Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.
How can you tell how old a toilet is?
Manufacturers often stamp the date when your toilet was made on the inside of the tank lid. By carefully lifting the lid off the tank and flipping it over, you should be able to determine how old your toilet is. Sometimes the stamp is found on the tank itself just above the water line.
How do I know what kind of toilet seat I have?
If you’re not sure by looking at your toilet which type of toilet seat you need, simply measure the length of it. Grab a tape measure or long wooden ruler (at least 20 inches). Locate the holes where the seat is bolted into the toilet. From these bolts, measure directly down the center to the front of the bowl.
What are the two different types of toilet seats?
There are 2 main types of toilet seat: standard close and soft close.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you remove a hidden screw from a toilet seat?
How to Remove and Install a Toilet Seat – YouTube
How do I know what toilet seat to buy?
Does the toilet seat brand have to match the toilet?
Compatibility. As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.
What is a skirted toilet?
Simply put, a skirted toilet means the toilet has a skirted trapway. A skirted trapway covers up all the bends and curves you see on a standard toilet bowl, with a smooth sleek side that’s easier to clean. In most cases, skirted toilets can be installed using the same rough plumbing setup as a standard toilet.
How do you tighten a one piece toilet seat?
Put one of the bolts with the phillips head through the quick-change mounting post and slide the bolt into one of the two anchors. Tighten clockwise by hand until it becomes too hard to further tighten by hand. The bolt with the phillips head is the same size bolt as the “setting” bolt as shown in Step 2.
How do I measure my toilet seat size?
Using a tape measure, determine the distance between the center of the mounting holes in the back of the toilet. The standard measurement for this distance is 5 ½”, with a midpoint of approximately 2 ¾”. Place the hook of your tape measure at the midpoint and measure to the outside edge of the toilet bowl rim in front.
Can I put an elongated toilet seat on a round toilet?
An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.