How do I reset my Arris TG2472?

To reset the ARRIS TG2472 to its default settings, you have to do the following steps:

Table of Contents

Switch on router.
For at least 15 seconds, press the Reset button.
Restart of the device is automatically executed.
Router has been reset to factory settings.

How do I reset my Arris admin password?

Set a new password

Open a web browser.
Enter “192.168.
Enter the username “cusadmin” (lowercase).
Enter the current password (case sensitive) found on the white sticker on your modem.
Click Manage Wi-Fi Network.
Click the 2.4G or 5G tab, for the network you want to set a new password.

How do I get to Arris Touchstone TG2472?

Type 10.0. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Arris Touchstone TG2472 is admin.

How do I find my Arris admin password?

Manage your Arris Wireless Network

The Login window will prompt for the router configuration username and password.
The default username is “admin”
The default password is “password”

What is the default password for Arris?

password

By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.

How do I factory reset my Arris?

To run an Arris router reset to the original factory settings, locate the same pinhole on the back of your modem. Use the paperclip to press the button inside the hole but hold the button down for a full ten seconds this time. This will run a full factory reset on the modem.

How do I find my router username and password without resetting it?

Just do a search for the router’s model number and ‘manual’, or search for your router’s model and ‘default password’. Look for a sticker on the bottom of router itself. Many routers, especially those have come from an internet service provider, have unique passwords.

Is Arris Touchstone TG2472 a router?

TG2472 | Touchstone® TG2472 Cable Voice Gateway
It combines two FXS ports of carrier-grade VoIP, a 4-port gigabit router, MoCA 2.0 over coax, and a dual band 802.11ac wireless access point with battery back-up into a single integrated device.

How do I change my Arris TG1682G WIFI password?

visit http://192.168.0.1, you will be prompted with a login box. username: admin and the password password (Note: If you have already changed the password use that instead.) the screen like what you see here. Change the Pre- Shared Key to your desired password.

Why can’t I log into my Arris router?

Enter the default Arris router password
If this doesn’t work, someone may have changed the router’s login credentials. If this is the case, you simply need to reset your router to factory defaults. Just note that by resetting your Arris router, any changes you have made to the router will be completely cleared.

What is the admin password for Arris modem?

The default username is “admin,” and the Arris default password is “password.” After you connect, you can change a variety of settings depending on your Arris device model, often including passwords, wireless connection settings and other information.

What happens if I reset my modem to factory settings?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

How can I access my router without admin password?

How to Access your Router

Open Command Prompt in Windows.
Type in ipconfig/all.
Once it shows you the results, simply look for the Default Gateway listing, and that’ll show you the IP address.
You can then take that IP address and enter it in in your browser.

What happens if I forget my wifi password?

In your router’s web interface, head to the Wi-Fi settings and look for the Wi-Fi password. If your router gives you the option to see the password, then you’ve got what you need. Otherwise, you can just change the password and then connect using the new one.

How do I change my WIFI password Arris DG2460?

Place a check in the box next to Enable Wireless. In the Wireless Network Name (SSID) field, enter a new name. In the Pre-Shared Key field, enter a new password. Click Apply.

Is the Arris DG2460 a router or modem?

DG2460 | Touchstone® DG2460 Cable Gateway
It combines a 4-port gigabit router, and a dual band 802.11ac wireless access point. The DG2460 serves as the hub of service delivery in the subscriber’s home providing high-speed data, voice and IP video to wired and wireless connected devices.

How do I access my Arris TG1682G router?

What is the Arris default password?

Does resetting your router change your password?

It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. (So don’t do this just for fun!)

How do I recover my router password without resetting it?

The easiest way of how to find routers password is by checking the sticker at the back of the router box. The sticker will show you the password along with other details such as serial number, mac address and other details that you will need to access the router interface.

How do I recover my 192.168 1.1 password?

Factory Reset
If you’ve already changed your password or username and forgotten it, you can simply reset the router instead. By resetting it to its factory settings, the default login and password will be restored.

How can I change my WiFi password?

How to change your Router’s Wi-Fi password

Open your browser to the configuration page of your router:
Enter your router’s username and password details:
Open the Wireless section:
Change the password:
Set your security type:
Save your settings:

How can you reset your wifi password?

How to change your Wi-Fi password

Enter the router’s IP address in your internet browser.
Check the bottom, back, or side of the router for the IP address.
Log into your router’s configuration page.
Look for the “Wireless”, “Wireless Security” or “WLAN” option.
Enter the new password in the “Wi-Fi Password” box.

What is the default password for ARRIS?

How do I reset my Arris TG2472?