How do I reset my DIRECTV DVR?
Unplug your receiver
Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
Why are my DIRECTV recordings not working?
To fix the issue, go to your TV that’s currently playing the recorded show you want to stream. Press Stop or EXIT on the remote control to stop the playback. Tip: Many issues can be fixed by resetting your DVR or receiver. It may take up to 24 hours for programming info to appear in the program guide after restart.
How do I fix Error 775 on DIRECTV?
Check receiver connections
- Check and secure all connections on the back of your receiver. Start with the SAT-IN connection.
- See if you have a SWiM Power Inserter attached to the DIRECTV cable coming from your dish (it may be in a different room).
- Wait 15 seconds, then plug it back in.
How do I fix DIRECTV error 771?
So resolving the problem may be as simple as tightening a connection. First go to the back of the receiver. And make sure all cable connections are secure.
Does DIRECTV box have a reset button?
Method 1: Press the reset button
On most DIRECTV receivers, there is a small red button located inside the access card door. With others, the button is on the side of the receiver. Press the red button, then wait for your receiver to reboot.
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the DVR’s power supply back into the unit, you will hear a beep.
How do I get my recordings back on DIRECTV?
Here are the steps:
- Turn on your PC and DirecTV Genie HD DVR.
- Press “Menu” on the remote controller.
- Highlight the Manage Recording menu, and select “History”. Find the deleted recordings in the list and restore them immediately.
How do you refresh a DIRECTV receiver?
To refresh:
- Go to myAT account overview and select My DIRECTV.
- Choose Manage Package.
- Scroll to Manage receivers and elect Refresh receiver.
- Your DIRECTV service may be interrupted for a few minutes during the refresh process.
What does error code 775 mean?
Document. Error code 775. This means there is a issue between your receiver and satellite dish.
What does code 775 mean?
One of the many error codes that DIRECTV users see when something goes wrong with the picture on their televisions is error code 775. Error code 775 basically indicates that your DIRECTV receiver is, for some reason, having trouble communicating with your satellite dish.
What does error code 721 mean on DIRECTV?
If error 721 displays, you don’t subscribe to the channel you’re trying to watch – or you may need to refresh your receiver. INTERACTIVE STEPS.
What does 711 mean on DIRECTV?
DIRECTV error code 711 indicates that your receiver may need to be activated, or your service refreshed.
Does resetting DIRECTV DVR erase recordings?
This erases all your recordings, all your settings, and puts your receiver or DVR in the state it was when you got it. We recommend this option before sending a defective or unwanted device back to DIRECTV.
What is the default password of DVR?
If you restore your DVR / NVR system to default settings, the username and password will also be restored to default. Default login for most LHV / LNR Series systems: Username: admin. Password: 000000.
How do I reset my DVR without a password?
If you forgot the admin password of DVR or NVR, you can reset the password by scanning the QR code generated on the local GUI of the device. You should have allowed the Mobile Client to access your phone’s camera.
Why did all my recordings disappear?
Most likely, you were out of hard drive storage space and the DVR automatically deleted the oldest recorded shows. Shows are only kept until more room is needed, however you can protect shows from deletion from the Recorded TV category.
How often should I refresh my DIRECTV receiver?
The DIRECTV web site won’t let you refresh a receiver more than once every five minutes, and it will create error flags if you do it more than three times a day. This could lead down the road to a call from DIRECTV support just to make sure everything is ok, and that would end up wasting everyone’s time.
How often should I reset my DIRECTV receiver?
It turns out that with today’s receivers, clients, and DVRs, the right schedule for rebooting is about once a quarter which (not surprisingly) is about the same schedule as DIRECTV’s software updates.
What is a SWM box on DIRECTV for?
The DirecTV Single Wire Multiswitch (SWM) is a specially designed piece of hardware that allows a DirecTV satellite dish signal to be split and used with many different tuners/receivers. The usual configurations allow 5, 8, 16, or 32 connections to a single satellite dish.
Where is DIRECTV SWM located?
Where is my DirecTV SWM located? You can find the SWM in the LNB (low noise block-down converter) at the end of the dish arm, powered by the 21V DC power inserter.
What does 771 mean on DIRECTV?
If you see error code 771, your dish isn’t communicating with the satellite.
How do I fix error code 721?
Here are the solutions that you can try to fix error code 721 on Star Wars Battlefront 2 on your Windows 11/10 PC:
- Check the current server status of EA servers.
- Make sure your internet is stable.
- Renew the IP configuration.
- Hard reset your Xbox console.
- Disable UPnP.
- Change to Google DNS.
What does code 614 mean on DIRECTV?
Your account is past due and services have been reduced to a minimum level. DIRECTV error code: 614, 615 or 616. Video connection lost between your Genie client and the Wireless Video Bridge or main Genie receiver.
How do I refresh my DIRECTV signal?
Refresh your DIRECTV channels and service
- Go to myAT account overview and select My DIRECTV.
- Choose Manage Package.
- Scroll to Manage receivers and elect Refresh receiver.
- Your DIRECTV service may be interrupted for a few minutes during the refresh process.
What does code 782 mean on DIRECTV?
If you see error code 782, your DIRECTV receiver is having trouble communicating with your satellite dish. A diagnostic system scan confirms that your receiver has power and is connected to other DIRECTV equipment in your home.