How do I setup my Plantronics CS55?

How do I setup my Plantronics CS55?

If your desk phone doesn’t have a headset port, follow the Plantronics CS50-CS55 standard setup guide.

1. Step 1- Connect AC power.
2. Step 2- Pair your CS50 or CS55 headset to the charging base.
3. Step 3- Plug in the included phone cord.
4. Step 4- Plug into the headset port.
5. Step 5- How to use your headset.

How do I connect my Plantronics CS55 headset to my computer?

Connect the CS55 (via the SeleCT switch) to your PC, preferably with the use of a USB sound adapter. Set the sound output volume of the CS55. This is done with a “crude” and then a fine method. The crude output is set with the sliding switch on the bottom of the unit with A being the least output and D the greatest.

How do I setup my Plantronics wireless headset?

First unplug your handset cord from your telephone. Next take the telephone interface cable and plug into your phone plug. The other end into the back of the base unit.

How do I pair my Plantronics wireless headset with base?

To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Poly Bluetooth headsets.

Can Plantronics CS50 connect to computer?

Plantronics PerSono Suite software provides the link between your CS50-USB headset and compatible softphone applications on your computer. PerSono Suite software provides the ability to remotely detect and answer/end a call from your softphone application via the headset call control button.

How do I reset my Plantronics CS50?

To reset your CS50/CS55/CS60:

1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly.
2. Press and hold the talk button (B) again.
3. Disconnect the AC power supply from the bottom of the base.
4. Test the headset to ensure it works properly.

Why is my Plantronics headset not connecting?

Charge your headset’s battery. Often, a headset’s inability to pair with the cellphone is due to a simple lack of power. Place your headset on the charger and charge it fully to rule out this possibility. While you’re at it, charge your phone battery too.

How do I pair my Plantronics Bluetooth headset to my phone?

How to Pair Plantronics Legend Bluetooth to Samsung Android

How do I pair my CS50 headset?

Pairing Your Plantronics CS50 Headset and Base – YouTube

How do I reset my Plantronics CS55?

How do I pair my Plantronics CS50 headset to base?

How do I reset my Plantronics wireless headset?

How to Reset a Plantronics Bluetooth

1. Turn on the headset by pressing the “Power/Answer” call button.
2. Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
3. Wait for one minute for the reset to be complete.
4. Turn on the headset again by pressing the “Power” button.

Why won’t my Plantronics Bluetooth connect to my phone?

How do I connect my Plantronics headset to my android?

Bluetooth Headsets: How to Pair with a Droid

1. On your Droid, press Menu > Settings > Wireless & Networks > Bluetooth Settings.
2. If Bluetooth is turned Off, tap to turn it On.
3. Press Scan for devices.
4. Place your Bluetooth headset into pairing mode.
5. When you see your Plantronics device name, tap it to pair and connect.

How do I sync my Plantronics CS540 headset to the base?

Plantronics CS540 Pairing Guide – YouTube

How do I reset my Plantronics headset base?

Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.

Why is my Plantronics headset not pairing?

How do I connect my Plantronics headphones to my phone?

How to connect Panasonic Bluetooth® Earphones – YouTube

How do I reset my Plantronics CS540 headset?

How to reset the CS540. Press in and hold the mute and talk button and release once the talk indicator light on the arm begins to blink quickly. Press and hold just the talk button until the indicator light stops blinking. Take out the AC power supply wire from the base for 5 seconds and then plug it back in.

How do I pair Plantronics Bluetooth?

While the Voyager 5200s LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.

1. iPhone Settings > General > Bluetooth > On.
2. Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices.

How do I reset my Plantronics Bluetooth headset?

What is true wireless pairing?

It’s called True Wireless Stereo (TWS), and it’s a unique Bluetooth feature that will let you enjoy true stereo sound quality without the use of cables or wires. TWS works as follows: You pair a primary Bluetooth speaker to your preferred Bluetooth-enabled audio source.

How do you connect your phone to?

Step 1: Pair a Bluetooth accessory

1. Swipe down from the top of the screen.
2. Touch and hold Bluetooth .
3. Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
4. Tap the name of the Bluetooth device you want to pair with your device.
5. Follow any on-screen instructions.

How do I pair my Plantronics cs540 headset?

What’s the difference between wireless and true wireless headphones?

The main difference is that regular wireless earbuds still have a wire connecting the two earpieces whereas true wireless earbuds feature two earpieces that aren’t physically connected in any way, shape, or form. So the true in true wireless refers to the absence of a wire that connects the two earbuds.