How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.
- Length x width=Square footage of the driveway.
- Driveway sq ft x $3= low end cost.
- Driveway sq ft x 7= high end cost.
- Driveway sq ft x $2= low end cost.
- Driveway sq ft x $4= high end cost.
- When to reseal your driveway:
- When to repave your driveway:
How much does it cost to make a ton of asphalt?
Asphalt costs $40 to $80 per ton. The cost of asphalt is $0.75 to $2.00 per square foot for hot-mix.
Is it cheaper to do asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do I calculate asphalt?
Estimate the volume of asphalt needed, using geometrical formulas and plans or measurements, including width, length, and depth (thickness). Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft3 (2322 kg/m3). Multiply the volume by the density (in the same units) to get the weight.
How thick should a asphalt driveway be?
2 to 3 inches
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How much does it cost to asphalt a road?
The cost to pave a private asphalt road is $35 to $85 per linear foot. Asphalt parking lot paving costs $3 to $7 per square foot. An asphalt sidewalk costs $12 to $28 per linear foot.
Can you lay asphalt over concrete?
If the question is “CAN I lay asphalt over concrete?” then the answer is “Yes.” This is absolutely possible if elevations allow for it, and we’re happy to lay asphalt driveways over concrete if that’s what you want. It’s also the cheaper option since heavy equipment is required to dig up an existing concrete slab.
Is asphalt or concrete stronger?
There is a common belief that concrete pavements are stronger than asphalt pavements. The reason for this misconception is that comparisons are not made on equivalent designs. The traffic-carrying ability of asphalt or concrete pavement is approximately the same for each inch of pavement thickness.
How many square meters is a ton of asphalt?
One ton of asphalt covers: ½” or 12.7 mm thick = 95 SqM. 1” or 25.4 mm thick = 48 SqM.
How many m3 are in a tonne of asphalt?
The following density conversion factors for estimating the amount of material needed once compacted are: Granular A & B = 2.4 tonnes/m3. ¾” Clear Stone = 1.8 tonnes/m3. Asphalt – 2.5 tonnes/m3.
How warm does it have to be to pour asphalt?
The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It’s possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn’t likely to bring about the best results possible.
Can you asphalt over concrete?
Well, the answer is yes! It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
Why do they put asphalt over concrete?
When it comes down to it we recommend asphalt driveways over concrete for three main reasons: It has faster installation. It has better resistance to weather. It is more cost-effective.
How thick should asphalt be over concrete?
Commercial driveways and lots should use 3 inches of asphalt. Commercial driveways should also use 8 inches of granular base aggregate, while lots should use 6 inches of granular base aggregate.
What freezes first concrete or asphalt?
Melts Ice Faster – Due to its dark color, asphalt tends to melt snow faster than concrete.
How many tons is a square Metre of asphalt?
So a cubic metre of asphalt weighs 2.243 tonnes.
How to calculate asphalt cost?
First,select one of the five options from the drop-down menu to calculate or calculate with Length,width,area,volume,density,thickness,and dirt need to remove.
How do you calculate the price of asphalt?
The Sun. The sun is one of asphalt’s worst enemies.
What is the current price of asphalt?
Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it’s hot-mix, cold-mix, porous, recycled, or crushed.
How much does asphalt paving cost per sqft?
There are many factors that affect the asphalt paving costs per square foot including: Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.