How do you check a line lock?
Test Line Lock With the wheels off the ground, vehicle in neutral, have someone start the car and apply the brake pedal. Attempt to turn each wheel. If you installed the line locks correctly, the wheels should spin. If one or more wheels do NOT spin, the line lock has not held pressure.
Can you use a line lock as a parking brake?
Do not use an electrical type “line-lock” for a parking brake. These type line-locks are normally open and powered in the closed position, which is exactly what you want for a line-lock. I have two line-locks, one for the front brakes and one for the clutch release and both work great for those applications.
What is the point of line-lock?
A line-lock allows you to lock the front brakes independently of the rear brakes, so the car stays put while the tires smolder. The device is basically an electric solenoid, controlled by a switch on the shifter. With the brakes applied, the driver depresses and holds the switch, then releases the brake pedal.
Can you use a line-lock as a parking brake?
What are line locks used for in racing?
When fractions of a second count, you need gear you can count on. Shop at Summit Racing Equipment for line locks from trusted manufacturers like B&M, Hurst, Granatelli, Moroso, TCI, and Biondo. Also called anti-roll systems, launch controllers, or staging locks, line locks are crucial components for drag racers.
Where can I buy line locks?
Shop at Summit Racing Equipment for line locks from trusted manufacturers like B&M, Hurst, Granatelli, Moroso, TCI, and Biondo. Select your preferred location and we’ll note which parts are ready to be picked up TODAY.
How do you install a staging lock on a car?
The Staging Lock System should be installed on the front braking system in a manner that does not interfere with normal brake operation. The Staging Lock System must be mounted securely to prevent brake line flex and fatigue. The Staging Lock System must be installed away from moving parts and exhaust components.