How do you install a mower deck?
Adjust the mower height control knob to its lowest install. Position to allow the lift arms to reach their lowest position and align with the ground height mower deck push.
What year did John Deere make STX38?
When it was introduced, the John Deere STX38 riding mower was heralded as an upgrade from the STX30 model. This model had a larger frame and more powerful engine than its predecessor. Production for the STX38 ran approximately nine years, from 1988 to 1997.
How do you change the belt on a John Deere STX38 deck?
All you do is unhook. This little hook from it. And then this comes free floating. And then um everything else will become really loose. So what i’m gonna do is grab this spring.
How much horsepower does a John Deere STX38 have?
John Deere STX38 Yellow Deck
| John Deere STX38 Engine | |
|---|---|
| 12.5HP Kohler 398cc 1-cyl gasoline | |
| Fuel tank | 1.25 gal 4.7 L |
| Engine details … |
Should a mower deck be level front to back?
For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck.
How do you reattach a mower deck?
How To Remove and Reattach A Lawn Mower Deck – YouTube
What oil does a John Deere STX38 take?
Both STX38 models need 2 quarts of high-quality detergent oil with an API service class rating of SG, SH, SJ or higher and an SAE grade of 10W-30 when temperatures are above 32 degrees Fahrenheit, or a 5W-20- or 5W-30-grade oil when temperatures fall below 32 F.
How wide is a John Deere STX38?
John Deere STX38 Yellow Deck Dimensions
| Dimensions | |
|---|---|
| Wheelbase | 44.69 inches 113 cm |
| Length | 60 inches 152 cm |
| Width | 52 inches 132 cm |
| Height | 38.6 inches 98 cm |
What size belt does a John Deere STX38 take?
This belt is 96-1/4″ length, the M125218 belt for the STX38 black deck is 95-3/4″.
Do you have to remove mower deck to replace Belt?
Removal of the deck would be extremely helpful when replacing any belt on the lawn mower. On some models you may not have to for the two lower belts, but it would still make the replacement procedure quicker and easier.
What motor is in a John Deere STX38?
John Deere STX38 Yellow Deck Engine
| Engine Detail | |
|---|---|
| Kohler CV12.5-1215 | |
| 1-cylinder | |
| air-cooled vertical-shaft | |
| Displacement | 398 cc 24.3 ci |
How many quarts of oil does a John Deere STX38 take?
Should your mower deck wheels touch the ground?
Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
How high should a mower deck be off the ground?
Mow Lawn at Proper Height – YouTube
Are all 42 mower decks the same?
However, while all engines are interchangeable, it doesn’t follow that all mower decks are interchangeable. While mower engine manufacturers agree on standard engine mounting specs, no such agreement is in place for any other mower component.
How much oil does a John Deere STX38 hold?
John Deere STX38 Yellow Deck Engine
| Engine Oil | |
|---|---|
| Oil capacity | 2 qts 1.9 L |
| Oil change | 50 h |
What length is the drive belt on a John Deere STX38 mower?
How long is a John Deere deck belt?
Dimensions
| Belt length (in.) | 140.1 | 48 in. |
|---|---|---|
| Fits Deck Size (in.) | 48 in. | 48 |
| Product Depth (in.) | 1 | 21 |
| Product Width (in.) | 4 |
How often should you replace your mower deck belt?
There is no specific timeframe that a deck belt should last for. However, for the cutting of an average lawn, you should comfortably achieve 3 to 4 years without a problem.
How tight should a mower deck belt be?
Apply pressure to the belt between pulley A and pulley B, and deflect the belt ½ inch. The gauge should read 10-15 ft-lb. If the reading on the gauge is higher, it is too tight, and if it is lower, it is too loose.
What kind of oil does a John Deere lawn tractor use?
10W30 oil
All John Deere mowers with gas engines take 10W30 oil. Any diesel mower engines will take 15W40 oil.
Should back wheels be higher on lawn mower?
Pushing. The mower’s larger rear wheels allow it to be pushed easier than smaller wheels. The rear wheels are also easier to use on hard ground as smaller wheels do not have as much pushing power as larger wheels.
Should mower deck be higher or lower in front?
For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck. Naturally, this makes the sweet spot about 1/4-inch of pitch, depending on the mower model.
Should mower deck wheels touch the ground?
What size mower deck gives the best cut?
It works well for lawns up to 2 acres and all the manufactures make both quality machines and economy lawn tractors in this size. 46 inch, 2 bladed decks: About 1.2 acres per hour. 46 inch, 2 bladed decks generally give you the best cut.