What did the NP149 come in?

What did the NP149 come in?

What did the NP149 come in? The NP149 transfer case was used in General Motors’ full-size pickup trucks and full-size SUVs from 2000 to 2005. The NP149 and later NV149 were used mainly for Chevrolet and GMC full-size pickups, as well as Cadillac’s line of full-size SUVs.

How do you read a transfer case tag?

Or if it’s electric shift or manual shift or if it’s slip yoke or bottle or not bottleneck slip yoke or bolt on yoke or if it’s kind of bail or flange up it’s basically going to give you the pedigree.

What is a transfer case on a GMC truck?

Transfer Cases | GM Transfer Cases

The transfer case drives power to the front and rear axles in four-wheel-drive (4WD) and all-wheel-drive (AWD) vehicles. Transfer case fluid should be changed every 30,000 miles to keep it operational and free from debris.

What does a transfer case do Silverado?

The transfer case in the Chevy Silverado enables you to manually shift between front-wheel drive and four-wheel drive. With the transfer case, the Silverado can adapt to any driving situation. You have a choice of two 4WD transfer cases for the Silverado. The single-speed transfer case has 2-high and 4-high settings.

Which trucks have the NP261 transfer case?

NP261-NV261 History & Information
Common vehicles it was used in were the Chevrolet Silverado 1500, GMC Sierra 1500, Chevrolet Silverado 2500, GMC Sierra 2500, Chevrolet Silverado 3500, and GMC Sierra 3500. The case has a 2.72:1 low gear ratio with a left side drop output.

What vehicles have NP241 transfer case?

The NP241 transfer case was in service from 1989-1999. It features an aluminum casing and is driven by a chain. It is a popular model, being found in numerous applications including the Chevrolet Blazer, Suburban, and Tahoe, as well as the 1500, 2500, 3500, and Van.

What do the numbers on a transfer case tag mean?

Transfer Case Tag Decoded – YouTube

How do I identify my transfer case model?

New Process/New Venture transfer cases are easy to identify. Early models have a rectangular ID plate screwed to the back of the case; newer ones have a round red/silver/black tag on their backsides. BorgWarner models have an assembly tag secured by one of the housing’s bolts.

How much is a transfer case for a GMC?

Our Transfer Case Components OEM and aftermarket parts range from $0.99 to $644.99 for the GMC Sierra 1500. If you’re interested in a specific brand of GMC Sierra 1500 Transfer Case Components products, we carry popular brands like Valvoline.

How much does it cost to fix a transfer case?

The average cost for transfer case replacement is between $2,640 and $2,756. Labor costs are estimated between $441 and $556 while parts are priced at $2,199. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

Can a transfer case cause transmission problems?

Yes, a bad transfer case can damage a vehicle’s transmission or transaxle assembly. The transfer case is responsible for transferring power from the engine to the transmission. If the transfer case is not working properly, it can cause the transmission to overheat and fail.

What causes a transfer case to go out?

Commonly, a transfer case will fail due to a low fluid level caused by leaks, a lack of maintenance or regular wear and tear. It’s important to address fluid leaks right away to prevent internal transfer case damage. Changing the transfer case fluid on a regular basis is also important.

What fluid goes in a NP241 transfer case?

How do I know if I have a 1 or 2 speed transfer case?

Expert Reply: Does your 4WD transfer case have a high gear and low gear setting? If so, that would indicate you have a 2 speed transfer case. If there’s no indication it has a high or low speed then it’s a single speed transfer case.

What does a NP246 transfer case fit?

The NP246 model transfercase fits a variety of GMC and Chevrolet 4WD vehicles. There are several variations of the 246, so your assembly number or VIN will be required (see below) when ordering this unit.

How hard is it to replace a transfer case?

Replacing the transfer case will take a couple of hours, and it’s a heavy part. It’s important to go in knowing exactly what to do and how to do it right. We have some tips for you: To remove the driveshafts, you may want box end wrenches.

What happens when transfer case goes out?

When your transfer case goes bad, your car might jump in and out of 4-wheel drive on its own. This indicates an inability to stay in a drive mode which can damage the transfer case, other systems on the vehicle, or cause an unsafe driving situation.

Can you drive a 4×4 without the transfer case?

If you are driving a 4WD vehicle then all the power is sent to the drive shafts to the differentials through the transfer case. Without a transfer case, you will not be able to drive the vehicle since the power is split 50/50 to the front and rear drive shafts and in 4WD or 4H mode.

How many hours does it take to replace a transfer case?

Labor guide says replace front part of transfer case is 5.2 hours, rear part of transfer case 3.0 hours.

What are the signs of a bad transfer case?

Here are some of the most common signs you may encounter when you have a bad transfer case:

• Gear Shifting Issues.
• Difficulty Staying in 4WD.
• 4WD Will Not Engage/Disengage.
• Puddle Formation Directly Under the Transfer Case’s Location.
• Weird Grinding, Growling or Humming Noises.
• 4WD Warning Light Illuminates.
• 4WD Transfer Case.

Can you drive with a damaged transfer case?

Should you drive your car with a bad transfer case? Driving your car with a bad transfer case is a bad idea. If you continue to drive with a transfer case that has a serious mechanical problem, you could destroy it beyond the point of repair, and possibly damage your transmission, driveshafts and axles in the process.

How many quarts does an NP241 take?

Registered. Officially, engine takes 7 quarts.

Does a transfer case do anything in 2WD?

Two-wheel transmissions have no transfer case.

What is GM 2 speed transfer case?

GMC models equipped with a two-speed transfer case also include a four-wheel drive setting known as “low range.” Typically marked as “4 ↓”, low range effectively doubles the torque sent to the wheels, making it useful for off-road driving in deep sand, mud, or snow.

What vehicles have NP246 transfer case?

Now designated the NV 246 EAU by GM, this transfer case is found in GM trucks (Tahoe, pickup, Yukon, Suburban, Suburban EXT, Escalade and Avalanche) and as such represents a large production volume.