What is a Form C on Network Rail?
This form is issued by the Nominated Person and certifies that the overhead line equipment (OLE) has been electrically isolated and earthed.
What is Network Rail safety vision?
Everybody has a responsibility to behave safely and challenge unsafe behaviours and conditions when we see them. This underpins our promise to safely transport more people and goods where they need to be on time, every time.
Are Network Rail standards free?
Welcome to the Network Rail Standards Portal. This site provides access to Network Rail standards. These are made freely available to all Network Rail suppliers and partner organisations through the use of a membership function.
How are trains detected?
The presence of a light rust film on the rail head and/or wheel results in a high resistance which may prevent the short circuit, and therefore the train detection, from occurring.
What is the minimum time for standing in a position of safety before the approaching train passes?
10 seconds
You must be in a position of safety at least 10 seconds before a train arrives. Acknowledge the driver’s warning by raising one arm above your head. Do not leave your position of safety until the COSS tells you to do so.
What is a nominated person Railway?
Carry out Nominated Persons AC duties under the guidance of a mentor to the required standard. The Nominated Person will fully understand the dangers of working on and around the overhead line system. The Nominated Person will also be able to read OHLE drawings and be fully conversant with the wiring instructions.
What are Network Rail standards?
Network Rail standards and controls are a set of documents we produce to define the way we work. They set out the information we share, the principles we have and the business requirements we work to. Together, they give us a consistent, safe and coherent set of working practices across the whole company.
What is the hazard directory on the railway?
The National Hazard Directory (NHD) is a vital tool, utilised by thousands of people across the rail industry. It is an essential database for organisations planning and delivering safe work and access to any part of the rail infrastructure.
How do I access Network Rail standards?
There are a number of ways for suppliers, principal contractors and subcontractors to access Network Rail standards and controls and the awareness briefing report: • Online: IHS Network Rail Standards Online at: https://global.ihs.com/csf_home.cfm?&csf=NRor call IHS Customer Services on 01344 328300 for login details.
How do I get Risqs accreditation?
How do I achieve RISQS Compliance? Qualifying involves completion of the RISQS Questionnaire and choosing your product codes. Some code groups require registration only, whereas others require qualification by an on-site audit by an external RISQS auditor.
Which sensor is used to detect train?
“The ultrasonic sensor detects that an object is located on the track. If the object is still detected by the sensor when it has stopped moving, this means that the train has stopped.
How do train drivers know when to stop?
The railways use a train detection systems which can tell signallers exactly where every train is and how fast they are going. There are also systems that can automatically stop trains if the driver doesn’t take the correct course of action or passes through a red signal.
What does a red triangle on a sentinel card mean?
The following symbols may appear on a Sentinel card: Green square means you are newly qualified in PTS. Blue circle means you have a colour vision defect; this prevents you holding some competencies. Red triangle means you must be accompanied when on the infrastructure.
Can a COSS cross an open line?
The COSS armlet or badge must have COSS in white letters on a blue background. you can reach that position of safety without crossing any open line other than the one you are on. You must not rely on these arrangements during darkness, poor visibility or when in a tunnel.
What is the ABC of safety critical communication?
– Proceed Authority; – Work on Track Authority; – Train Running Information; – A Condition Affecting the Network.
Are Railway Group standards mandatory?
Agreed by the industry, standards are developed and maintained by RSSB. They may be mandatory or optional, depending on type; and describe a common way of working for all railway undertakings in areas where they apply.
What is the four foot on the railway?
The area between the inner running faces of a pair of rails.
What must you do when warned of an approaching train in a lookout warning area?
Lookout warning – a lookout will warn you in time to get to a position of safety at least 10 seconds before the train arrives. Never distract a lookout.
What is Risqs certificate?
Railway Industry Supplier Qualification Scheme (RISQS) is recognised by the rail industry as the most effective means of deriving assurance and managing supply chain risk. It gives the industry’s 90-plus buyer members the assurance to do business with confidence with 4,000 supplier members.
Who needs Risqs?
RISQS are required as a Network Rail Supplier Assurance Provider to comply with the requirements of NR/L2/SCO/302 Supplier Qualification Requirements, auditors, irrespective of which Supplier Assurance Provider they represent, will be required to ensure has been demonstrated at audit.
What is a defect detector on a train?
A defect detector is a device used on railroads to detect axle and signal problems in passing trains. The detectors are normally integrated into the tracks and often include sensors to detect several different kinds of problems that could occur.
What is a hot box on a train?
A hot box is the term used when an axle bearing overheats on a piece of railway rolling stock. The term is derived from the journal-bearing trucks used before the mid-20th century.
Can a coin on the track derail a train?
As someone who works on the railroad, you’ve probably heard about the myth that a single penny or quarter could derail a train. The good news for you is that putting a penny on the tracks isn’t likely to cause the train any trouble at all.
What age do train drivers retire?
between 60 and 65
What is the Train Driver retirement age? The current Train Driver retirement age is between 60 and 65, subject to a medical test to assess if you still meet the minimum requirements.
What does a green square mean on a sentinel card?
you are newly qualified in PTS
The following symbols may appear on a Sentinel card: Green square means you are newly qualified in PTS. Blue circle means you have a colour vision defect; this prevents you holding some competencies. Red triangle means you must be accompanied when on the infrastructure.