What is IDC ribbon cable?
An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the …
What is a ribbon cable connector called?
ZIF connectors are used to secure delicate ribbon cables, such as FFC (flat flex cables) or FPC (flexible printed circuit) cables. As the name implies, no force is needed to plug in or remove the cable.
Can you use IDC connectors with stranded wire?
Another characteristic of an IDC connection is that the contacts are gastight and dusttight so that any ingress of potentially damaging gas or dust is effectively prevented. IDC technology is suitable for both stranded and solid wires.
What is IDC cable used for?
“An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the …
How do you connect a ribbon cable to a connector?
Slide the new ribbon cable into the connector or attach the connector itself.
- If you’re attaching a connector, you should hear the connector click into the clip.
- If you slide the ribbon cable into the connector, just line the end of the ribbon up with the bottom of the connector and slide it back into the clip.
What pitch is IDC cable?
2.54mm
This connector has a mating pitch of . 100″ (2.54mm) and a row spacing of . 100″ (2.54mm).
Are scotch locks any good?
I consider scotch locks are ok if used correctly and in the right atmosphere. However most failures are due to water ingress and corrosion or attempting to use the connectors on the wrong gauge wire. Most IDC’s used in electronic are much closer quality controlled with conductor size being specific to a particular IDC.
How does a ribbon cable connector work?
A ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result, the cable is wide and flat. Its name comes from its resemblance to a piece of ribbon.
What is purpose of ribbon cable?
Ribbon cables are usually seen for internal peripherals in computers, such as hard drives, CD drives and floppy drives. On some older computer systems (such as the BBC Micro and Apple II series) they were used for external connections as well.
Are Scotchlok connectors reliable?
Some 50 years after 3M introduced the industry’s original insulation displacement connector, 3M™ Scotchlok™ Insulation Displacement Connectors (IDCs) still offer the quick installation and reliability that electricians and contractors demand.
What gauge is IDC ribbon cable?
flat ribbon cable and IDC sockets. Connections are made to most of Mosaic’s embedded controllers and I/O boards using 26 AWG or 28 AWG flat ribbon cable with 0.05″ pitch (wire spacing). The boards specify 24-pin headers (2 rows by 12 contacts) using 0.1″ (2.54 mm) spacing.