What is the difference between a dock board and a dock plate?

What is the difference between a dock board and a dock plate?

Dock Boards

The biggest difference between the two, however, is the intended application. Dock plates are designed for lighter loads while dock boards are designed to handle the weight of heavy machinery, like forklifts.

What are dock boards used for?

Dock boards provide a safe passway between dock and truck during loading and unloading applications. Additionally, dock boards have a capacity of up to 20,000 pounds and an added feature of curbs designed to prevent loading equipment from running off the edge.

What size dock plate do I need?

For the width, the dock board or plate should be around 12-18 inches wider than your widest piece of equipment. On dock boards, the curbs take up about 6 inches of width. You should also note the dock height and the height of the truck that will be unloaded and loaded.

What are portable dock boards?

Portable Hand Truck Dockboards
Portable hand truck dock boards are ideal for bridging gaps between the backs of trucks and docks. They feature aluminum construction, with steel bolt-on legs to prevent dock boards from slipping while in use. Punched design helps to withstand increased traction.

How do dock plates work?

How Mechanical Dock Levelers Work – YouTube

How wide is a dock plate?

Copperloy recommends a minimum width of 60 inches for dock boards that will be used with forklifts and a width of 54 inches for dock plates used with pallet trucks.

What size are dock boards?

Step 4: Determine Plate Length

How do you use a dock plate?

Use the lift ring to raise the dock plate up and walk across the dock plate until it’s flat and secured into the truck bed. Begin to load or unload the truck with proper lifting tools. Tripping/Falling Forklift accidents Never use manual strength or hands to lift dock plate.

How is a dock plate measured?

Loading Dock Measuring – YouTube

What is dock equipment?

Dock equipment refers to the items used to assist with the loading and unloading of materials from trucks to buildings. Dock equipment is designed for efficiency and safety in docking areas, even after taking a large degree of abuse.

What is the function of dock leveler?

A dock leveller is an equipment used to level up the difference in height between a warehouse floor and delivery vehicle. It has an adjustable height which can be used for various vehicles. With the dock leveller, smooth transition is ensured when goods are loaded or unloaded from/into a truck.

What size is a dock leveler?

Dock levelers are available in standard widths of 6 ft, 6-1/2 ft and 7 ft. The most common width is 6 ft, which suits most applications. However, 6-1/2 ft and 7 ft wide dock levelers are becoming more popular for wider trailers and side-by-side pallet arrangements (see Figure 51, Figure 52 and Figure 53).

How do you measure the size of a dock?

How to Measure For A Dock / Pier To Get An Accurate Quote! – YouTube

How do you measure a dock plate?

What is the proper overlap for a dock plate?

Dock plates must be flush with the surface underneath them to keep movements to a minimum. Always position dock plates to have a minimum overlap of 8 inches at each end. Always check to see that dock plates are secured before using them. Check load capacity for dock plates.

What are the parts of a loading dock?

The Elements of A Loading Dock

• Leveler Plate. A leveler plate is a piece of equipment located inside of the building.
• Overhead Door.
• Loading Dock Shelters and Seals.
• Dock Bumpers.
• Loading Dock Lighting.
• Loading Dock Trailer Restraints.
• Interlocking Loading Dock System.
• Loading Dock Access Points.

What are the different types of dock levelers?

When it comes to loading dock levelers, there are 4 types commonly used which include:

• Mechanical Dock Levelers.
• Hydraulic Dock Levelers.
• Air Dock Levelers.
• Vertical Dock Levelers.

How much weight can a dock plate hold?

Dock plate capacities range from 1,800 lbs. to 5,500 lbs.

How wide are dock boards?

Step 4: Determine Plate Length

How wide should a dock slip be?

Boat slips shall provide clear pier space 60 inches (1525 mm) wide minimum and at least as long as the boat slips. Each 10 feet (3050 mm) maximum of linear pier edge serving boat slips shall contain at least one continuous clear opening 60 inches (1525 mm) wide minimum.

What is standard dock height?

48 in.
​​Within North American facilities, the standard dock height is 48 in. However, dock heights typically range from 48 in. (120 cm) to 52 in. (130 cm), and heights of up to 55 in.

What should be placed in the gap between a truck and a loading dock?

Forklift Safety Starts at the Dock Door
Dock plates, dockboards and dock levelers are designed to bridge the gap between the trailer and the dock to ensure workers and forklifts can safely load or unload trailers.

What is a dock apron?

Loading dock apron space is the area required to maneuver and position trailers into place at the loading dock. Planning the loading dock apron space requires recognizing the amount of trailer movement and the amount of room it takes to achieve that movement.

What is a standard loading dock?

Loading Dock Height Standards
​​Within North American facilities, the standard dock height is 48 in. However, dock heights typically range from 48 in. (120 cm) to 52 in. (130 cm), and heights of up to 55 in. (140 cm) are not uncommon.

What is hydraulic dock leveler?

What is a hydraulic dock leveler? Hydraulic dock levelers are operated with the push of a button on a control panel, no longer requiring the operator to manually use a pull-chain. Instead, the operator uses a control or a button to raise and lower the leveler and extend or store the lip.