What is the difference between Mercury BigFoot and regular?
The Bigfoot gear case is built longer with larger parts. This provides greater control and thrust, specifically designed for larger loads, according to Mercury, which also states that the larger parts make the engines more efficient and reliable.
What makes a Mercury outboard a BigFoot?
BigFoot engines are built with a taller, heavy-duty gear case, larger gears and shafts (up to 33% larger than standard outboards) and that places the propeller deeper in the water dramatically improved performance by been able to running a larger propeller.
How fast will a 60 hp outboard motor go?
25 mph to 30 mph
16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
How much does a 300hp outboard weight?
562 lbs
Specs & Compare
| Engine Type | V6 |
|---|---|
| Weight † | 250 kg (551 lbs) – 254 kg (562 lbs) |
| Recommended Fuel | Octane 87 |
| Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
| Recommended Fuel Filtration | Yamaha 10-Micron Fuel/Water Separating Filter (external) |
What is a BigFoot outboard motor?
Mercury’s BigFoot design delivers more control than competitive motors. With traditional boat hull design, a boat slices through the water allowing the engine to work in fairly undisturbed water. With a pontoon, the twin tubes under the hull forces turbulent water toward the engine.
Should I get command thrust?
Command Thrust models are most beneficial for larger, heavier or fully-loaded boats that need more thrust or are used for commercial or heavy-duty applications. Some examples include boats with a deep V hull, commercial workboats, offshore fishing boats, high-use boats, and houseboats and pontoons.
How much horsepower does a Mercury 60 have?
Specifications – 60 EFI
| HP / kW | 60 / 45 |
|---|---|
| Displacement (CID/CC) | 60.8 / 995 |
| Full throttle RPM | 5500-6000 |
| Fuel induction system | 2 valves per cylinder, single overhead cam (SOHC) |
| Alternator amp / Watt | 18 amp / 226 watt |
What size motor do I need for a 17 foot fiberglass boat?
Typically, you need at least a 20 horsepower outboard motor for a 17-foot boat. However, some boats have smaller motors, such as the 7 to 12 hp range.
What size motor should I put on my boat?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
How much fuel does a 300 hp Mercury outboard use?
At 40 knots, performance was even more striking: at a really high cruising speed, indeed, the two Verado 300 engines used just 2.23 liters of fuel per mile.
How much does a 300 hp Mercury weigh?
600 lbs
SPECIFICATIONS – 300
| HP / kW | 300 / 224 |
|---|---|
| Gearcase ratio | 1.75:1 / 1.85:1 |
| Dry weight *Lightest model available | 600 lbs / 272 kgs |
| CARB star rating | 3 |
| Bore and stroke | 3.6 in x 3.4 in / 92 mm x 86 mm |
What does CT stand for on Mercury motors?
July 5, 2014 at 3:02 PM · Wondering what the “CT” logo on the back of the new 90hp and 115hp FourStroke engines means? It’s Command Thrust, a larger gearcase that creates a bigger footprint in the water, which provides more leverage to control your boat.
What does Elpt mean on a Mercury motor?
An ELPT outboard is an acronym meaning the motor has electric start, long shaft and power trim features.
How much does a 60 hp Mercury outboard motor cost?
$8,999.00. In Stock – Brand New 60 Hp Mercury 4-Stroke Command Thrust outboard motor. Includes Electronic Fuel Injection (EFI) plus Power Tilt & Trim. Command Thrust Lower Unit is geared for greater thrust.
How fast will a Mercury 60 hp 4-stroke go?
The 60hp Merc 4-stroke is slow out of the hole and on this rig top speed on the gps is 34.0mph at 5900rpms with fine tuning the trim.
Can you exceed max hp rating on boat?
The maximum horsepower capacity marked on a boat must not exceed the horsepower capacity determined by the computation method discussed in paragraph (a) of this section, or for certain qualifying boats, the performance test method discussed in paragraph (b) of this section.
Are 4 stroke boat motors better than 2 stroke?
4-Stroke Outboards Pros
The fuel efficiency of a 4-stroke motor can be 50% better than that of a 2-stroke motor with the same HP. As for environmental concerns, 4 stroke outboards produce far less harmful emissions, which can be as much as 90% cleaner than those from a similar sized 2-stroke motor.
How many hours do outboard boat motors last?
A typical estimate from the industry is that an outboards motor last around 1,500 hours of operation. Assuming the average owner uses their boat 200 hours a year, this would mean that the motor would last between seven and eight years.
What’s better long shaft or short shaft outboard?
If it measures 15″ or with in a inch of that you will need a short shaft outboard. If it measures anywhere from 17″ to around 22″, then your going to want to go with a long shaft motor. Anything bigger than that your obviously going to need an extra long shaft.
How much is a new Mercury 300?
Mercury Marine 300XL Verado • $28,300
Created to power the largest boats for the boldest adventures, Verado delivers advanced engineering and refined operation to boat owners who don’t compromise; every feature is designed to offer the ultimate on-water experience and greatest confidence.
How much does a Mercury 300 weight?
527 lbs
| Horsepower | 300 Horsepower expand/collapse |
|---|---|
| Steering | Hydraulic (standard) Power (optional) |
| Shaft length | 20″ / 508 mm 25″ / 635 mm |
| Gearcase ratio | 1.75:1 |
| Dry weight *Lightest model available | 527 lbs / 239 kgs |
How much does a 300 hp Mercury outboard cost?
Mercury Marine 300XL Pro XS • $25,994.
How much fuel does a Mercury 300 use?
How much does a 60 hp Mercury outboard cost?
What does XL mean on Mercury outboard?
L Long Shaft (20″) XL X-tra Long Shaft (25″) XXL XX-tra Long Shaft (30″) C Counter-rotating engine.