What is the purpose for command exec timeout 0 0?
The example also show the exec-timeout 0 0 command. This means that on the console port will never timeout. The default for this command is exec-timeout 10 0 which means that the console line will logoff when inactivity at this line reaches 10 minutes.
What is the exec timeout command?
The Cisco ‘exec-timeout’ command sets a specific time to disconnect idle EXEC sessions. The default value for the EXEC timeout is 10 minutes. We can also specify a certain time by indicating how many minutes and seconds the idle EXEC session would run before it will timeout.
What is the default exec timeout in Cisco?
10 minutes
By default, the exec-timeout is set to 10 minutes on both the console and the vty ports. The timeout value is specified in minutes and seconds. You will set the timeout value to 15 minutes and 0 seconds on vty lines 0 through 4 using the exec-timeout command.
What is the difference in line vty 0 4 and 5 15?
VTY lines are usually used for creating out-of-band management sessions to devices. If a password is not supplied on a vty line, that line cannot be used for managing the device. In some cases administrators may decide to let junior staff to use lines 0 – 4 and senior staff to use lines 5 – 15.
What is the use of line Vty 0 4?
VTY is a virtual port and used to get Telnet or SSH access to the device. VTY is solely used for inbound connections to the device. These connections are all virtual with no hardware associated with them. The abstract “0 – 4” means that the device can allow 5 simultaneous virtual connections which may be Telnet or SSH.
What is line Vty in Cisco?
The virtual terminal or “VTY” lines are virtual lines that allow connecting to the device using telnet or Secure Shell (SSH). Cisco devices can have up to 16 VTY lines. You can determine how many VTY lines you have by issuing “line vty 0?” from global configuration mode.
What are Vty lines?
What is the difference between session timeout and exec timeout?
Hi! exec timeout command is used to specify the timeout for exec sessions [telnet/ssh] whereas session timeout command specifies the idle timeout period for all the sessions. The default exec timeout period is 10 mins.
Why do we use line Vty 0 4?
What is the meaning of Vty 0 15?
Lines 0 15 is vty lines 0, 1, 2 ,3 ,4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 and 15. for example if you were type in global configuration mode, line vty 0 15 you will enter configuration for lines 0-15.
How many Vty lines are there?
The virtual terminal or “VTY” lines are virtual lines that allow connecting to the device using telnet or Secure Shell (SSH). Cisco devices can have up to 16 VTY lines.
What is the meaning of line Vty 0 4?
VTY is solely used for inbound connections to the device. These connections are all virtual with no hardware associated with them. Related Blog – VTY Password. The abstract “0 – 4” means that the device can allow 5 simultaneous virtual connections which may be Telnet or SSH.
How many Vty lines does a switch have?
16 VTY lines
The virtual terminal or “VTY” lines are virtual lines that allow connecting to the device using telnet or Secure Shell (SSH). Cisco devices can have up to 16 VTY lines.
What is the meaning of Vty 0 4?
What does Vty stand for?
Virtual Teletype
What Does Virtual Teletype (VTY) Mean? Virtual teletype (VTY) is a command line interface (CLI) created in a router and used to facilitate a connection to the daemon via Telnet, a network protocol used in local area networks. To connect to a VTY, users must present a valid password.
What is line Vty command?
What Does Virtual Teletype (VTY) Mean? Virtual teletype (VTY) is a command line interface (CLI) created in a router and used to facilitate a connection to the daemon via Telnet, a network protocol used in local area networks. To connect to a VTY, users must present a valid password.
What is the meaning for line Vty 0 4?
What is a line Vty?
What is a Vty line?
How many Vty lines are on a router?
5 vty lines
By default all routers have 5 vty lines (factory defaults). Unless you configure the remaining available lines, there is no need for them to be protected.