What is the standard for slip resistance?
“Slip resistance” is defined under ASTM C 1028 as being 0.6 (level) – 0.8 (ramp) with a wet testing surface.
What is ASTM C1028?
ASTM C1028 is a standard test method for determining the static coefficient of friction of ceramic tile and other like surfaces by the horizontal dynamometer pull-meter method. This test method is offered as part of the Micom Laboratories’ material testing services.
What does DCOF 0.42 mean?
This rating is called the Dynamic Coefficient of Friction (DCOF). According to modern DCOF AcuTest results, receiving higher than a 0.42 DCOF rating on level surfaces means there is a high slip resistance potential and therefore a low probability of slipping.
What is a good slip resistance?
R11 and R12 is the resistance recommended by many professionals for public wet areas such as showers in a changing room. Whereas R9 and R10 values are often used and recommended for domestic Bathroom Tiles or Kitchen Tiles where the risk of slipping is less.
What is R10 slip resistance?
• R10 Anti Slip Rating – Options that possess R10 anti slip ratings will provide minor to moderate resistance to slipping, making them ideal for use in hallways, kitchens, and other living spaces including bathrooms.
How is slip resistance measured?
The pendulum test measures the loss of energy due to friction as the standard rubber-coated slider assembly slides across the test surface. It provides a standardized value of slip resistance. This is the PTV (pendulum test value). PTVs can be obtained for dry surfaces and surfaces contaminated with water.
How do you measure slip resistance?
What is slip coefficient?
The slip coefficient, ks, is defined to be the ratio of the force causing slip at the contact surface to the normal force between the plates resulting from bolt tension.
What DCOF is considered slip resistant?
0.42 DCOF
Slip Resistance for Level Interior Floors
3 require that tiles wet with water have a minimum slip resistance of 0.42 DCOF. Keep in mind that this is a minimum level of slip resistance for level interior floors that are wet with water.
How do I know if my tile is slip resistant?
How to Find Slip Resistant Tile
- Coefficient of friction, or COF, is an objective standard of rating how slippery an item is.
- Search COF ratings published by tile manufacturers and retailers.
- Look for higher COF slip resistance numbers.
- Dry, clean items that move against each other are usually COF-rated from 0.3 to 0.6.
Is R10 slip resistance Good?
R10 Anti Slip Rating – Options that possess R10 anti slip ratings will provide minor to moderate resistance to slipping, making them ideal for use in hallways, kitchens, and other living spaces including bathrooms.
Is R10 OK for shower floor?
Often used to prevent slippage in domestic situations, anti-slip tile ratings of R10 will be perfect for kitchens and bathrooms. Thanks to their anti-slip properties, they can also be used as external floor tiles (porcelain versions only) or commercial tiles.
What is R11 slip resistance?
R11 Anti Slip Rating – Providing moderate resistance to slips, tiles with R11 anti slip ratings can be deemed safe for use in almost any interior space. This includes kitchens, bathrooms, and even dedicated wetrooms. You may even find them in industrial and public settings.
What does R10 slip resistance mean?
What is R12 slip rating?
The “R” value of a tile can range from R9 – R13 with R13 being the most resistant. R9 – Slip resistance on a 3-10 degree incline. R10 – Slip resistance on a 11-19 degree incline. R11 – Slip resistance on a 20-27 degree incline. R12 – Slip resistance on a 28 – 35 degree incline.
What is a safe coefficient of friction?
5) is as follows: “The Occupational Safety and Health Administration recommends that walking surfaces have a static coefficient of friction of 0.5.” Together, OSHA’s rulemaking proposal and the reference in ADAAG probably account for the attribution of a 0.5 COF to OSHA.
What type of tile is slip resistant?
Ceramic/Porcelain Tile
Ceramic and porcelain tile create a very smooth and durable surface. You are unlikely to trip on it. But, it is also one of the more slippery options available. If you want the look and feel of these types of tile, but you want to reduce the risk of falls, there is a solution.
Is R10 enough for shower?
R10: indicates a medium grip with an inclination plane from 10° to 19°, suitable for bathrooms and showers, kitchens of small shops, garages.
Is R9 anti slip?
R9 is the lowest of the anti-slip tile ratings, meaning they are fine for domestic environments and if they are made of porcelain, some commercial environments where anti-slip properties are not really required.
Is R11 a good slip rating?
What is P4 slip rating?
The slip rating however is based on a minimum of five (5) specimens tested, in which the average of the BPN is used.
…
Wet Pendulum Slip Ratings AS 4586 Appendix A.
| Wet Pendulum Slip Rating | Wet Pendulum SRV Range | |
|---|---|---|
| P2 | 20 → 34 | 25 → 34 |
| P3 | 35 → 39 | 35 → 44 |
| P4 | 40 → 44 | 45 → 54 |
| P5 | > 44 | > 54 |
What coefficient of friction is considered slippery?
Dry, clean items that move against each other are usually COF-rated from 0.3 to 0.6. Zero COF means that two items have no friction. Slippery items can be rated as low as COF 0.04.
What is a slippery coefficient of friction?
A traditional measurement of slip resistance is the coefficient of friction (COF). The COF represents the resistance to movement between two objects, higher COF indicates greater friction and slip resistance. There are a number of testing methods for COF, none of which are universally recognized.
What is the most slip resistant flooring?
The Safest Non-Slip Bathroom Flooring Options
- Ceramic/Porcelain Tile. One of the best overall options is the use of tile.
- Glass Flooring. A trendy and upscale option for your home’s bathroom floors is the use of glass.
- Non-Slip Vinyl Flooring.
- Cork or Bamboo Flooring.
Is R10 OK for wet room?
However, you should avoid installing R10 anti-slip rating tiles in areas that regularly get wet or need specifically high slip resistance, such as a bathroom. Instead, R10 tiles are best suited to hallways, living rooms and utility rooms, where only occasional spillages may occur.