What PSI should my Fox Float RP23?
Pressurize your main air chamber to a minimum of 50 psi and no more than 300 psi.
How do I service Fox RP23?
And servicing a shock that has that stuck down condition is the way you take it apart once it’s apart you’ve released that pressure and you can do the service like you would any other shock.
How much air should I put in my Fox Float shock?
Add air pressure to the main air chamber in ~50 psi (3.4 bar) increments, slowly cycling the shock after every 50 psi (3.4 bar) addition.
What is Propedal on Fox shock?
Propedal is a marketing term created by FOX to describe a digressive compression damping force curve. Digressive force curves have been around long before bicycles had suspension. Digressive compression tunes use preloaded valving to build compression quickly in order to give a firmer feel at low shaft speeds.
How do you set up a sag on a Fox Float rp23?
Competitive Cyclist Guide to Fox RP23 Shock Set Up – YouTube
What pressure should my Fox forks be?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 34 FLOAT Pressure (psi/ bar) |
| 120-130 | 54-59 | 58psi/ 4.0 bar |
| 130-140 | 59-64 | 63psi/ 4.3 bar |
| 140-150 | 64-68 | 68psi/ 4.7 bar |
How much does it cost to service a Fox shocks?
SHOCK SERVICE
| REBUILD | REVALVE | |
|---|---|---|
| OEM Raptor Front w/Coil | $125 | $35 |
| 2.5 Bypass 2.5 Internal Bypass 3.0 Bypass XP 1000 Front | $150 | $35 |
| 3.0 Internal Bypass 3.5 Bypass XP 1000 Rear | $250 | $35 |
| 4.0 Bypass | $300 | $35 |
Can you rebuild Fox Float shocks?
Fox Float Rebuild Kit: Product Overview – YouTube
What PSI should my rear shock be at?
15-25% is appropriate.
What PSI should my shock be?
The Fox website says the safe operating range is 50 to 300 PSI.
How do you measure rear shocks?
How To Measure Shock Length – Summit Racing Quick Flicks
How much sag should a dirt bike have?
The correct amount is approximately 33% of the bikes total available travel, usually between 95-115mm on full size bikes. The correct amount varies because of bike geometry, rider preference, and type of riding. The rider sag should be set with the rider in full gear.
How much is a SAG fork?
Generally speaking, though, here are good ranges to stay within: Rear shocks: 25-33 percent sag. Forks: 15-20 percent sag.
How much PSI is a Fox Float?
Hightower LT
| Fox Float DPX | ||
|---|---|---|
| Rider Weight | Air Pressure | Shock Sag |
| 100lbs (45.5kg) | 145 psi | 16-19 mm |
| 120lbs (54.4kg) | 165 psi | 16-19 mm |
| 140lbs (63.5kg) | 180 psi | 16-19 mm |
What PSI should my rear shock be?
The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear).
How long should Fox shocks last?
You spent a good deal of money on some high performance Fox shock absorbers, expecting them to last a good amount of time. Even if they dont last 5-6 years, you expect them to at least make it 1 or 2 years without problems.
How many miles do Fox shocks last?
50,000 miles
How long do Fox shocks last? It Depends on your driving style and shock setup (2.0, 2.5, 3.0, etc). Fox’s 2.0 IFP shocks have recommendations for servicing by 50,000 miles for street-only use.
How do you service a Fox Float DPS?
2018 Fox Float DPS Evol Rear Shock Sleeve Service – YouTube
How much psi is a Fox Float?
How much psi should I put in my Fox Float x2?
Sag is the amount your suspension compresses under your weight and riding gear. Sag should be set to ~30% of total shock travel.
…
Do not exceed 300 psi (17.2 bar), the maximum FLOAT X2 air pressure!
| Suggested Sag Measurements | |
|---|---|
| Travel | 30% Sag |
| 51mm/ 2.00in | 15mm/ 0.60in |
| 55mm/ 2.25in | 17mm/ 0.68in |
What is the maximum pressure for air shocks?
150 PSI
Remove all riders and cargo. DO NOT exceed 150 PSI (1034 kPa) in the shock.
What happens if your shocks are too long?
The other problem is that if the shock absorber that has been fitted to the vehicle is too long, in this case the vehicle suspension could experience the shock absorber “Bottoming out”. This term is used when the shock absorber is fully compressed, but the suspension still has an allowed amount of travel to go.
How do I choose the right shock size?
How much sag is too much?
Most manufacturers recommend that you set your sag somewhere between 25 to 35 percent. If your sag is higher or lower than that, you need to make some adjustments by attaching your shock pump and increasing or decreasing the air pressure in the shock and running the calculation again.
How does sag affect handling?
HOW DOES SAG EFFECT THE HANDLING OF MY BIKE? It is very beneficial to test different SAG settings for various riding conditions. Increasing the amount of SAG on your bike drastically increases high speed stability but decreases front end traction and cornering ability.