What should my bow brace height be?
These guidelines work for most recurve bows, but always follow the manufacturer’s recommended brace-height range. 62- and 64-inch bows have 7½- to 8½- inch brace heights. 66- and 68-inch bows have 8- to 9-inch brace heights. 70- and 72-inch bows have 8¾- to 9½-inch brace heights.
What is brace height on Bear Kodiak?
8″ – 9″
Manufacturer recommended brace height: 8″ – 9″.
What happens if brace height is too high?
If the brace height is higher, then the arrow will leave the string earlier, resulting in a lower arrow speed but in theory, a more forgiving bow, as there is less opportunity for the arrow to be influenced while attached to the string. Brace height is easy to adjust, by simply twisting, or untwisting the bowstring.
Why is a longer brace height more forgiving?
Longer brace height
Bows with longer brace heights are going to be more forgiving. This is because the arrow is coming off of the string sooner rather than later, meaning that the shooter has less time to influence the shot. These are also usually a bit slower in terms of fps.
Does brace height really matter?
Here are the reasons why: Brace height has the ability to negatively or positively influence shooting forgiveness. It’s measured from the throat of the bow’s grip to the center of the bowstring. The brace height influences an archer’s power stroke (distance from the bow grip to the archer’s full draw position).
Does brace height affect speed?
The brace height of a bow will affect two significant areas, the first being speed. In general, a bow with a shorter brace height will shoot much faster. This is because the distance between the string and grip is smaller, meaning the arrow stays on the string longer.
How do you measure brace height on a compound bow?
Understanding Brace Height – YouTube
What happens if your brace height is too low?
If the brace height is too low it will over stress the limbs of the bow. Withing the manufactures guide lines, raising the brace height will cause the bow to be less sensitive and more forgiving with the effect of shooting less hard because it is storing less energy (not much less).
Does bow brace height matter?
Depending upon the bow’s cam system, bows with longer brace heights generally shoot slower than those with shorter brace heights. But, sacrificing speed comes with undeniable benefit. A longer brace height puts more distance between the throat of the bow grip and the bowstring.
Is a shorter brace height better?
A short brace height offers the benefit of higher arrow velocity. This is because the bowstring is being drawn farther in order to reach the user’s draw length since, at rest, the bowstring is closer to the bow grip.
How long should my arrows be for a 29 inch draw?
it depends on the arrows you choose, you need at least 1/4″ of arrow overhang on the rest. so you can probably shoot an arrow that’s about 28 1/4 for rests that are set up normally. and go all the way up to full length 36″ arrows for indoor.
What makes a bow more forgiving?
A longer brace height (BH) makes a bow more forgiving of shooter error. BH is the greatest distance between the bow’s grip and the string.
Does brace height affect spine?
Raising the brace height reduces the dynamic spine of an arrow (or compensates for a stiff arrow). Lowering the brace height increases the dynamic spine of an arrow (or compensates for a weak arrow). For practicality: If your arrow is acting stiff, bring it closer to center or rasie the brace height.
Does brace height affect arrow speed?
The shorter the brace height, the faster the arrow will go. As soon as an arrow is released from the bowstring, it will start to slow down. The longer it stays on the string, the more energy it has in flight. Bows with higher speed will generally have a brace height around seven inches or less.
How does brace height affect accuracy?
The longer the brace height, the sooner an arrow leaves the string. The longer an arrow stays on the string, the higher possibility for errors to occur. So the faster an arrow can leave the string, the less time there is for errors to occur.
What spine arrow should I shoot with a 70 lb bow?
As draw weight increases, so should arrow rigidity (spine). Also, we strongly recommend that you use an arrow with at least 5 grains of weight per pound or draw weight (if you are shooting a 60 lb. bow, you should use and arrow of not less than 300 grains). This includes your field point or broadhead.
What length arrows for 28.5 draw?
around 27 inches
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
What does a shorter brace height mean?
‘ The amount of vertical torque is a function of how far the arrow passes above the hand and the brace height. These two variables define the angle at which you are pulling up on the string (vertical torque). The shorter the brace height, the greater the angle and the greater the vertical torque.”
Does brace height affect draw weight?
no. When you get to the end of your draw length it should be the same. But the preload is higher so the weight when you start to draw starts heavier as you alluded to.
Can an arrow be too stiff?
Shooting an arrow that is not stiff enough, or a group of arrows that vary in stiffness, will cause you to be less accurate. An under-spined arrow will veer right, while an arrow that is too stiff will favor slightly left.
What causes an arrow to fishtail?
Registered. If by fishtailing you mean moving left and right and not up and down, then it could very well be arrow spine. Either too stiff or too weak. Try putting a heavier tip on your arrows or lengthening them.
How long should arrows be for 27.5 in draw?
It really depends on you, some like them flush with the front of the riser, some like them just past the rest and as short as possible. I have a 27.5-28″ draw and my arrows are typically 27.75″. I wouldn’t want that long of an arrow personally. If you decide you want a heavier tip you will want a stiffer arrow.
What arrows for 70lb bow?
A 350 grain arrow (the minimum weight recommended for a 70lb compound bow) moving at 320 feet per second (fps) has a kinetic energy of 79.57 ft-lbs and a momentum of .
How does brace height affect?