What year was the International 806 made?

What year was the International 806 made?

1963-1967
The Farmall 806 and 706 were introduced in 1963, with production running to 1976 and 1967 respectively..

Farmall 06 series tractors.

Farmall 806
Manufacturer International Harvester
Production 1963-1967
Length 161 inches (410 cm)
Width 110 inches (280 cm)

Is a Farmall 806 a good tractor?

The Farmall 806 is a great buy – check this model out if you’re looking for lots of a power at a low price. The Farmall (row-crop) and International (standard) versions of this tractor are some of the best tractors ever produced by IH. The 806 is a full-featured, modern tractor.

How much does a Farmall 806 weight?

Farmall 806

Dimensions & Tires
Wheelbase: 101.2 inches 257 cm
Weight: 7720 to 8500 pounds
Front tire: 6.50-16
Rear tire: 15.5-38

What is the rarest Farmall tractor?

Production data

The International, or standard version production totaled only 158. These totals are quite low compared to other tractor models built by International Harvester, and today the Farmall 1026 could be considered a rare tractor, and the International 1026 extremely rare.

What engine does a 806 International have?

Farmall 806 Engine

Engine Detail
International Harvester D-361
liquid-cooled
Displacement: 361 ci 5.9 L
Bore/Stroke: 4.125×4.50 inches 105 x 114 mm

How many horsepower is an international 856?

International Harvester 856

International Harvester 856 Power
Drawbar (claimed) 90 hp 67.1 kW
PTO (claimed) 100.4 hp 74.9 kW
Drawbar (tested) 87.2 hp 65.0 kW
PTO (tested) 100.49 hp 74.9 kW

What cubic inch is an 806 international?

International Harvester 806 Engine

Engine Detail
International Harvester
liquid-cooled
Displacement 301 ci 4.9 L
Bore/Stroke 3.8125×4.39 inches 97 x 112 mm

Are Farmall Tractors good?

The tractor is easy to work on – it was a great tractor to learn on as a boy, and still a pleasure to repair today. It’s a well-designed tractor, without any regular flaws. The Farmall H starts easily and runs smoothly, even in the cold. It’s perfect for the pushing and pulling tasks I tackle every day.

What was the first Farmall tractor ever made?

The first Farmall tractor with a direct-start diesel was the model 350, which appeared in 1956. The 350 could also be ordered with a gasoline or LP-gas engine. The 350’s direct-start diesel engine was built by Continental Motors.

How many horsepower is an international 1206?

International Harvester 1206

International Harvester 1206 Power
Drawbar (claimed) 99 hp 73.8 kW
PTO (claimed) 110 hp 82.0 kW
Drawbar (tested) 95.00 hp 70.8 kW
PTO (tested) 112.64 hp 84.0 kW

How much horsepower does a 1256 International have?

International Harvester 1256

International Harvester 1256 Power
PTO (claimed): 113 hp 84.3 kW
Drawbar (tested): 102.03 hp 76.1 kW
PTO (tested): 116.12 hp 86.6 kW
power test details …

What is an 856 international worth?

Auction Price on 856’s has run in the mid $5K to low $6K range. Those figures would be for 856’s without Loader. Generally speaking you can figure approx. $1K for a Loader of that vintage if its in good condition.

How many horsepower is a Farmall 666?

Note: the Farmall model 666 is the same as the International Harvester 666.
Farmall 666.

Farmall 666 Power
Drawbar (tested): 58.01 hp 43.3 kW
PTO (tested): 69.61 hp 51.9 kW
power test details …

What is a 1948 Farmall Cub worth?

No Reserve: 1948 McCormick-Deering Farmall Cub Tractor for sale on BaT Auctions – sold for $4,500 on November 26, 2021 (Lot #60,386) | Bring a Trailer.

How many gears does a Farmall H have?

The H is equipped with a 4-cylinder in-line overhead valve with a 152-cubic-inch (2,490-cubic-centimetre) displacement and a 6-volt, positive ground electrical system with generator, (when so ordered or retrofitted). The sliding-gear transmission includes six total gears: five forward and one reverse.

What was the most popular Farmall tractor?

When the 1940s began, International Harverster’s Farmall was the most popular tractor brand in the U.S. But during the decade their market share was challenged. The innovative Farmall tractor was first introduced in 1923 and was the first “row crop” tractor.

How many horsepower is a 1086 International?

International Harvester 1086

International Harvester 1086 Power
Drawbar (tested): 113.04 hp 84.3 kW
PTO (tested): 131.41 hp 98.0 kW
power test details …

What year did international make the 1256?

1967
They’d been extraordinarily good sellers, and IH wanted to keep the momentum rolling into the future. So, in 1967, they released the 1256. The list of improvements wasn’t super long, but there was one pretty noteworthy item.

How many horsepower is a 1566 International?

International Harvester 1566

International Harvester 1566 Power
Drawbar (claimed): 140 hp 104.4 kW
PTO (claimed): 161 hp 120.1 kW

How much horsepower does a 856 International have?

How much does a Farmall 856 weigh?

Farmall 856

Dimensions & Tires
Wheelbase: 105 inches 266 cm
Weight: 9270 to 10290 pounds
Front tire: 7.50-16
Rear tire: 16.9-38

What is the HP of the International 574 tractor?

International Harvester 574

International Harvester 574 Power
Engine: 67 hp 50.0 kW
Drawbar (claimed): 45.1 hp 33.6 kW
PTO (claimed): 52 hp 38.8 kW
Drawbar (tested): 45.85 hp 34.2 kW

What engine is in the International 666?

International Harvester 666 Engine

Engine Detail
International Harvester D312
liquid-cooled
Displacement: 312 ci 5.1 L
Bore/Stroke: 3.875×4.410 inches 98 x 112 mm

What is the smallest Farmall tractor?

Farmall Cub
The Farmall Cub or International Cub (or simply “Cub” as it is widely known) was the smallest tractor manufactured by International Harvester (IH) under either the McCormick-Deering, Farmall, or International names from 1947 through 1979 in Louisville, Kentucky.

What is a 1953 Farmall Cub worth?

1953 Farmall Cub tractor has sold in Saint Augustine, Illinois for $1320. Item DF6782 sold on May 26th, 2021.

Related Post