Why does my modem say no internet connection?

Why does my modem say no internet connection?

It could be due to broken cables, service disruptions, or just about anything else that’s not within your control. That said, it’s important to know if the problem lies with your Internet provider. For this, check if the “Internet” light on the modem is working. Ideally, the power and DSL lights should be turned on.

How many devices are connected to my BSNL WiFi router?

Enter your router’s admin password and tap the LOGIN button. The dashboard displays. Swipe up on the network information panel. The devices that are connected to your router display.

How can I connect BSNL WiFi to laptop?

Steps to connect to BSNL Free Wifi Hotspot

  1. Go to WiFi settings.
  2. Search and connect to BSNL WiFi.
  3. Tap on ‘connect’
  4. Enter the 10-digit mobile number.
  5. Tap on Get Pin option after which you will receive a 6-digit pin via SMS.
  6. After entering that PIN, users will be connected to BSNL WiFi.

How do you reset your modem?

Solution

  1. Shut down your computer.
  2. Unplug the cable modem from the electrical outlet.
  3. Leave the cable modem unplugged for at least 10 seconds.
  4. Plug the cable modem back into the electrical outlet and allow about 30 seconds to initialize before restarting your computer.
  5. Turn your computer back on.

How can I access my BSNL modem?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How do I restart my modem and router?

Step 1: Unplug the modem and router from the power outlet. Step 2: Wait at least 15 seconds. Step 3: Plug the modem back into the power outlet first, wait 1-2 minutes, then it’s time to power on the router. Step 4: Wait for all panel lights on your cable modem to become green on before testing your internet connection.

How do I troubleshoot my modem?

How to Fix a Modem That Won’t Connect to the Internet

  1. Check the lights on your modem.
  2. Check the power supply and coax cables.
  3. Reboot your router and modem.
  4. Check your Ethernet cables.
  5. Disconnect all connected devices.
  6. Plug your computer into your modem.
  7. Keep your modem cool.
  8. Update your modem and router’s firmware.

What is the IP address of BSNL router?

Configuring the Linksys Modem for BSNL Broadband Connection Start up your favorite browser and type “http://192.168.1.1” on the address bar. Login using your default username and password which is usually admin and admin. On the Time zone settings you can also select the appropriate Time zone.

Do you have network issues with your BSNL Mobile phone?

oi-Sneha By Sneha | Updated: Thursday, October 6, 2016, 20:09 [IST] Mobile phoneshave become a part and parcel of our life. And imagining a phone without a signal or even a weak network is an absolute horrifying sight for anyone. However, network issues are a common phenomenon in India and is often experienced by many, especially by the BSNLusers.

Why is my BSNL Broadband Internet so slow?

However, a majority of the BSNL broadband customers face a few issues in their internet connection such as slow speed or frequent disconnection problems. The main reason for this is the excessive impedance in the copper cables that are used for the connection.

Why is my BSNL DSL or ADSL LED blinking?

The frequent disconnection of internet while browsing is the most common issue in BSNL broadband services. You might notice that the DSL or ADSL LED in the modem to be blinking and there are various reasons for the same. Here, we have come up with a set of tips to avoid this frequent disconnection of the internet connection.

How to solve BSNL fiber not working problem?

How to Solve BSNL Fiber not working problem? You’ll get SMS confirmation regarding the ticket raised. Within the next 24 hours, BSNL technical person or from the local operator will come and check the Loss of Signal or break in the fiber line.

Related Post