Do they make a toilet with a 10 inch rough in?
Kohler K-3713-96 Highline Classic Comfort Height Two-Piece Elongated Toilet with 10″ Rough-In, Biscuit.
How do I know if I need a 10 or 12 rough in toilet?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
What is a 10 rough toilet?
Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
What is the most common toilet rough in size?
12 inches
The standard toilet rough-in is 12 inches, but don’t assume you have a 12” rough-in without measuring! Some older homes come with 10” or 14” rough-in sizes. You may also find 10” rough-in sizes in powder rooms, half baths, or other small bathrooms to save space.
How do I know rough in size for toilet?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
What is a toilet offset flange?
Unlike a standard flange, which is centered on the waste pipe, an offset flange is off-center—that lets you shift the location of the toilet by a couple of inches (left, right, forward or back). P.S. Flanges with stainless steel rings cost a few bucks more than all-plastic versions.
Which is better one or two piece toilet?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
Is round or elongated toilet better?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Can you replace a 12 inch rough-in toilet with a 10-inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
How far does an elongated toilet stick out from the wall?
29 to 31 inches
In general, round-front toilets extend 25 to 28 inches from the wall. Elongated toilets extend 29 to 31 inches.
Can you replace a 12 inch rough-in toilet with a 10 inch?
Can you replace a 10 inch rough-in toilet with a 12 inch?
Ideally, the toilet’s rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
Should toilet flange be flush with floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Why are Toto toilets so good?
They boast heated seats, a bidet function for a rear cleanse and an air-purifying system that deodorizes during use. The need for toilet paper is virtually eliminated (there is an air dryer) and “you left the lid up” squabbles need never take place (the seat lifts and closes automatically in many models).
How much should I spend on a toilet?
You’re going to use your toilet every day for years, so get a good one. Plan to spend $100 to $500 for a gravity toilet and $225 to $600 for a pressure-assist model.
How often should you replace your toilets?
Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.
What toilet height is best?
17 to 19 inches high
Today’s so-called “comfort height” or “right height” toilets feature bowls that are 17 to 19 inches high, as compared to the standard 15 inches of a regular toilet.
Why would I want an elongated toilet bowl?
Can you replace a 10 inch rough in toilet with a 12 inch?
Which is better one piece or two piece toilet?
Should I use 2 wax rings on toilet?
Do not be tempted to stack up two wax rings because this setup tends to leak. Installing a flange extender or using an extra-thick wax ring will work much better in the long run. Place the wax ring on the closet flange, not on the toilet.
Should you caulk around toilet flange?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
Which brand is better TOTO or Kohler?
When it comes to Kohler vs Toto vs American Standard, Kohler has a sound rating of 4 and Toto has a sound rating of 3 while American Standard only manages to achieve 2; making Kohler and Toto more superior when it comes to flushing noise levels.
Is TOTO better than American Standard?
Toto uses similar materials to build its toilets, but the designs are often more complex than American Standard. They also feature high-performance flushing technology that gives Toto toilets an advantage in flushing power over many of its competitors.
What does Home Depot charge to install a toilet?
The Home Depot charges a standard fee of $99 for toilet installation. The charges are inclusive of the cost of the toilet, labor, and materials. However, the total cost will vary depending on the specific model of toilet you choose, as well as any additional features or services you request.