Does American Standard make a 10 inch rough in toilet?
American StandardReliant 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Round Toilet in White, Seat Included.
How can I tell what model American Standard toilet I have?
Look inside the underneath of the tank lid for a model number. The model numbers start with a four-digit number beginning with a 2, 3 or 4. There may be a decimal and three additional numbers.
Can you replace a 12 inch rough in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
What does 10 rough in mean for toilet?
Keep in mind you need some space on the sides as well. Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
How can you tell how old a toilet is?
Manufacturers often stamp the date when your toilet was made on the inside of the tank lid. By carefully lifting the lid off the tank and flipping it over, you should be able to determine how old your toilet is. Sometimes the stamp is found on the tank itself just above the water line.
Can you replace just toilet tank?
If your toilet is cracked, leaking, or just outdated, it may be time to replace the toilet tank. Toilet tanks are sold separately from the bowls, so you can get any tank that fits onto your model of toilet.
How do I know if I need a 10 inch or 12-inch rough-in toilet?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
Do I need a 10 or 12 toilet?
A 10-inch rough-in is the usual measurement installed in older homes. However, the 12-inch measurement is the standard for modern toilet plumbing. Most toilets that you encounter in retail outlets have 12-inch rough-in dimensions.
How do I know if I have a 10 inch or 12-inch rough-in toilet?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
What is the average life expectancy of a toilet?
50 years
Share: Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
How long does a toilet wax ring last?
The wax ring is exactly what it sounds like: a ring made of sticky wax that helps form a watertight seal between the bottom of the toilet and the sewer pipe. It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely.
Can you make your toilet flush stronger?
Increase Toilet Flush Power – YouTube
How do I know what Tank to buy for my toilet?
Finding your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.
Can you replace a 12 inch rough-in toilet with a 10 inch?
Which is better one or two piece toilet?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
Does a 10 rough-in toilet save space?
Is round or elongated toilet better?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
How much should it cost to have a new toilet installed?
According to HomeAdvisor and Angi, toilet installation costs range from $224 to $532, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.
Should I replace a 20 year old toilet?
For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that’s 20 years or older.
Should you caulk around your toilet?
Caulk Prevents Smell
Yes, the bathroom is a place to get clean, but it can easily be a place to trap some pretty foul smells. If you don’t caulk a toilet to the floor, you could find yourself smelling residue from smelly mop water, tub water, or even worse, the remnants of your son’s potty training.
Which is better wax ring or rubber?
It all comes down to your personal preference. If you feel more comfortable using something tried and true, stick to a wax ring. For a newer mess-free approach, wax-free toilet seals are the way to go.
What can I put in my toilet to make it flush better?
How do you fix a weak flushing toilet?
5 Ways to Fix a Weak Toilet Flush
- Clear clog in the trap. As with most toilet issues, the most logical place to start is by checking to make sure there isn’t a blockage or clog.
- Open the water valve.
- Adjust the float.
- Fix or replace the flapper.
- Unclog the rim.
- Plumber for weak toilet flush.
Can I just replace toilet tank?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.