How can I fix my Huawei modem no service?
Make sure Wi-Fi is turned on and your password is correct. Power off and restart the device.
…
Restart the gateway:
- Press the power button on the back to turn it off.
- Unplug the power cord for 30 seconds.
- Plug it back in.
- Press the power button to turn it on.
How do I reset my Huawei E5330 router?
To reset the Huawei E5330 to its default settings, you have to do the following steps:
- Turn on router.
- Press RESET button for at least 10 seconds.
- Device restarts automatically.
- Default settings have been restored.
Why is my Huawei router showing a red light?
Steady red: the router is not connected to the Internet. HarmonyOS Connect pairing failed. The router rediscovered the device. The router is being updated.
How do I fix the red light on my wireless router?
Here’s how to fix the red light on a modem:
- Restart your router.
- Check your connections.
- Try a different cable or phone outlet.
- Try a different cable or phone cord.
- Check your internet credentials.
- Contact the manufacturer of your modem.
- Contact your ISP.
Why am I connected to Wi-Fi but no internet?
WiFi connected but no Internet: Start with the router
If the Internet works fine on other devices, the problem lies with your device and its WiFi adapter. On the other hand, if the Internet doesn’t work on other devices too, then the problem is most likely with the router or the Internet connection itself.
Why Huawei Cannot detect Wi-Fi?
If your HUAWEI device is unable to detect any wireless network, disable and re-enable the Wi-Fi. Then scan for wireless networks again. Also, try performing a network reset. On your device go to Settings, search for Reset network settings and perform the reset.
How do I reset my Huawei router to factory settings?
Connect the router to the power source and wait for the router to start. Press and hold the H (or Hi) button for more than 10 seconds until the indicator turns off. After the indicator turns red again, it indicates that the router has been restored to its factory settings.
How do I reset my Huawei modem?
Power on your modem. Place a paper clip or pin into the hole on the back of the modem labeled Reset. Hold the paper clip or pin down for 10 to 15 seconds and release. The modem will reboot on its own.
Why is Los blinking red?
LOS Light Blinking Red: What Does It Mean? First of all, LOS stands for Loss Of Signal. When everything functions properly this light should be off. When you see the LOS Light Blinking Red on your router it usually indicates there is a problem with the fibre optic connection.
Why is router blinking red?
On Spectrum’s most common Wave 2 and WiFi 6 routers, a blinking or flashing red light means that the router cannot connect to the internet. This issue is most common after an outage, when the modem is connected to the internet but the router is struggling to connect to the modem.
What is the meaning of red light in WIFI router?
A red light means that you are not connected to the Internet. Please ensure that you have sufficient balance in your account.
Why is my internet not working even though it’s connected?
Sometimes internet connection may fail due to simple things like a loose or unplugged network cable, modem, or router. If you’re on a wireless network, your computer’s wireless network interface card might be turned off.
What does WPS mean on a router?
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier.
Why does my Wi-Fi say no Internet connection?
A single computer has a WiFi connection without internet
If your computer is the only device that says it has a connection but no actual internet, it is likely that you have a misconfigured setting, faulty drivers or WiFi adapter, DNS issues, or a problem with your IP address.
Is there a problem with Huawei Internet?
Huawei.com is UP and reachable by us.
What happens if I reset my Huawei router?
If your router is restored while the Retain key settings option is enabled, key information such as Wi-Fi name and password will be retained. Nevertheless, after your router is restored, you would still need to complete the configuration process before you can access the Internet.
How do I reboot my Huawei router after resetting?
Connect your mobile device to your router’s Wi-Fi network. 2. Open the HUAWEI HiLink app and touch the settings icon in the upper right corner of the page. Touch Device and select Reboot or Restore factory settings.
What will happen if I reset Huawei modem?
If you enable Retain network settings after factory reset, critical information, such as the Wi-Fi name and password, will be retained after the router is restored to its factory settings. If you do not need to retain any settings, restoring the router to its factory settings twice can clear all configurations.
What do the modem lights mean?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
What is Los light on modem?
LOS means loss of signal.
Your modem (which acts as a router too since internet service providers or ISPs usually give a modem-router combo device) may be able to establish a local network connection for your personal devices, but it itself cannot communicate to your ISP because of signal loss.
What is Los and PON in router?
Check the lights on your Openreach equipment
If the “passive optical network” (PON) light is solid green and the “loss of service” (LOS) light is off, then it’s working properly. This means you’ll need to contact the company you buy your broadband from as there may be a problem with their network.
What happens when I press the WPS button on my router?
Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.
What is the WPS button on my router?
Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier.
Which lights should be on my modem?
The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.
What does it mean when WiFi is connected but no internet?
Sometimes, the WiFi connected but no Internet error may be with the Internet connection and not with any device. It could be due to broken cables, service disruptions, or just about anything else that’s not within your control. That said, it’s important to know if the problem lies with your Internet provider.