How do I connect my Digistat to Worcester?
Press the set button four times an LM. And off should be displayed. Press the plus button once. So the display shows on and a flashing antenna symbol can be seen.
How do I clear the error code on my Worcester boiler?
When there is a locking error, the boiler will display the error code, cause code and flash a warning triangle. After the boiler has been fixed then you will need to press the Worcester boiler reset button for 3 seconds to clear the codes.
How do I connect my Worcester wave to WIFI?
In order to connect the Worcester Wave to a home network, select the user’s Wi-Fi network name. The Wave will display the first characters and the last characters of a network name in the network list. If the Wi-Fi network is not visible on the network list: ► Check the network SSID has been set to visible (See 3).
Where are error codes on Worcester boiler?
The boiler will display an alphanumeric fault code to indicate the fault group. A three-digit number that can be accessed via the info menu by pressing the spanner/return button during a blocking error or when in normal operating status. The cause code should flash on the display during a locking error.
Why is my thermostat not connecting to my boiler?
Check the batteries in the thermostat
Being wireless, the sole power source for the thermostat is its batteries and they don’t last forever. Try changing the batteries and then turn the heating on.
How do I reconnect my thermostat to my boiler?
How to Re-Establish the Radio Frequency Connection – YouTube
Why does my Worcester boiler keep needing to be reset?
If you find you are frequently needing to do this then it is likely that there is a fault in the system that needs to be rectified. Common causes for regular breakdowns include a broken pump, a leak somewhere in the system, an electrical issue or a blocked heat exchanger.
What is the reset button on a Worcester boiler?
To reset the boiler turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting.
Can I connect my Worcester boiler to my phone?
Worcester’s new Wave Smart controller takes comfort, control and efficiency to the next level. Manage and change your heating and hot water setting from your smart phone or tablet using a wireless internet connection.
How do I find my Worcester wave password?
The serial number and access code are printed on the back of the Wave. If the password is lost then it’s important to reset the Wave. This can be done by placing a paperclip in the small hole on the left of the thermostat.
What does E on boiler mean?
economy
Essentially the ‘E’ setting on your boiler just stands for economy. This setting allows you to operate your boiler more efficiently.
What does the spanner symbol mean on a Worcester boiler?
Blocking error
The boiler will stop operating with no fault data displayed. The cause code, in the info menu, is accessed by pressing the spanner/return button. The condition will clear automatically when the associated fault clears e.g. waiting for an area to cool.
How do I connect my thermostat to my Worcester boiler?
How does thermostat communicate with boiler?
Traditionally, the thermostat is connected to the boiler by wires running through the walls of the home. It is often located somewhere neutral, like the hallway, but it can often be in the main living room of the house, where occupants spend most of their time.
Why does my boiler need resetting all the time?
Common reasons for your boiler to shut down include if the water pressure is too high or too low due to a problem in the water network, an interruption to the gas supply to your property or a blockage in the burner or heat exchanger. Before calling an engineer, it is worth seeing if you can reset the boiler yourself.
Should the blue light on a Worcester boiler be on all the time?
The blue light on a Worcester Bosch boiler is typically there to highlight that the boiler has power going to it. If there is no blue light showing, there are again a couple of possible explanations, including LED & PCB failure, as above.
Do I need to press the reset button on my boiler?
Generally, you push the reset button and hold it down for 10 seconds. Do this only once. Wait for 2-3 minutes, as the boiler may be starting up. If the reset has been successful, then the flame will ignite in the boiler.
Why does my Worcester boiler need resetting?
How can I control my boiler from my phone?
Control your heating from your phone with the Wiser Heat App. By having complete control over your heating, you can keep your heating bill as low as possible. Whether you’re at home, at work or even on holiday, with the Wiser Heat App, you’ll be able to control your heating from your phone.
How does Bosch Easy Control connect to the boiler?
Bosch EasyControl overview
The device can be connected to the boiler using a 2-core cable. Once connected to the internet, the simple set-up is completed using the EasyControl app. You can also add your contact details into your customer’s device to be the first point of contact when the heating system needs a service.
How do I reset my Wave account?
Here’s how to do it:
Go to Forgot your password and enter your email address. Check the “I’m not a robot” box and select “submit” We’ll email you a 24-hour temporary login link to the email address provided in step 1. Once you receive your temporary login link, you can login and will be prompted to set a new password.
Should I put my boiler on eco-mode?
Eco-Mode uses less energy than a standard “comfort” setting. Therefore it’s cheaper to run your boiler in the Eco-Mode. Perhaps you won’t save enough for a house, but every penny counts! You slightly-increased water usage is also unlikely to outweigh the savings you’re making on energy.
What temperature should my Worcester boiler be set at for central heating?
Typically, the most economical and efficient setting for your combi boiler is to set your hot water temperature to 60°C and your central heating temperature (within the boiler, itself, also known as the flow temperature) to 70-75°C.
What do the lights on my boiler mean?
Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.
What temperature should my boiler be set at in winter?
As a rule, setting your heating control to 75 degrees should be sufficient to give you a perfectly warm house, while also allowing your boiler to run as economically as possible. Once this is set, you shouldn’t need to adjust it.