How do I know what length shock I need?
So you’re going to take it from the eye to the end of the piston. And for this one we get a length of thirteen. And a half inches.
Is a longer shock better?
The larger the passage, the less resistance to motion the shock will give, and the smaller the hole, the tighter. A shock absorber must be “tuned” to match the vehicle it’s attached to in order to work properly.
How is XJ lift height measured?
So what we’re going to do is take a measuring tape and go from the axle tube to the frame rail and we’re going to measure. You want to make sure that you get a flat. Part.
What does Jeep XJ stand for?
eXperimental Jeep
What does XJ mean for Jeep? It means eXperimental Jeep. I guess the experiment worked because the style lasted for decades. It had a bespoke unibody chassis for a more car-like performance with epic off-roading capabilities. Some fans call it the golden age of Jeep.
Do I need longer shocks for a 2 inch lift?
If you are adding 2″ of lift in the rear then yes you would need longer shocks or you will be limiting your downtravel by 2″.
How much travel should a shock have?
On straight axle suspension systems, there is a 1 to 1 ratio between the movement of your shock and your wheel. That means if your wheel moves one inch, your shock extends or compresses one inch. In these applications 2.5 inches of shock travel in both directions (compression and extension) should generally be enough.
What happens if shock is too long?
The other problem is that if the shock absorber that has been fitted to the vehicle is too long, in this case the vehicle suspension could experience the shock absorber “Bottoming out”. This term is used when the shock absorber is fully compressed, but the suspension still has an allowed amount of travel to go.
How do I know what lift height my Jeep is?
You have someone with a stock wrangler, same model as yours measure from the top of the WHEEL (not tire – this takes tire size out of the equation) to the lip of the fender. Then you measure yours. The difference is your lift. You must be on level ground and you must have the same wheels (tire size doesn’t matter).
How do you measure lift height?
How to Measure Your Suspension Lift – YouTube
Is the XJ a real Jeep?
The Jeep Cherokee (XJ) is a compact sport utility vehicle manufactured and marketed across a single generation by Jeep in the United States from 1983 through 2001 — and globally through 2014. It was available in two- or four-door, five-passenger, front engine, rear- or four-wheel drive configurations.
What year XJ has Dana 44?
1987-1989
XJ Cherokee/Wagoneer: 1987-1989 (some say up until 1990) XJ Cherokees with the Tow Package sometimes came with the Dana 44 rear axle.
What happens if your shocks are too long?
Will stock shocks work with a 3 inch lift?
Suspension lift kits that raise your truck higher than 3 inches will usually require a new shock absorber to take up the difference in distance between the top and bottom mounting points of the shock. To simplify the shopping experience, the majority of brands we carry will include new shock absorbers in these cases.
Do shocks change ride height?
Bad shocks affect ride and handling, but they won’t change the ride height of the car.
Why does my car jump to the side when I hit a bump?
Since your vehicle moves all over the road after a bump, this indicates that your tires are indeed not staying firmly planted and are bouncing uncontrollably. This continual bouncing of the suspension will prematurely wear out other front-end components and cause the tires to wear unevenly.
How do you tell if Jeep has been lifted?
Look for spacers, or plastic discs, on top of the springs. From the pic, it looks like you have some lift. Park it next to a stock jeep and take a pic.
How do you measure a leveling kit?
How to measure your truck for a leveling kit. – YouTube
How much height do you need for a 4 post lift?
If you want to install a typical 2-post or 4-post lift in your garage, you need a ceiling that’s higher than 11 feet.
What height should a car lift be?
11-12 feet
How much space do I need? A car lift will optimize any space, so don’t fret if you’re concerned that your garage is too small. The car lift itself will fit into one bay space and it is optimal to have 11-12 feet clearance height.
Are XJ reliable?
Seriously though, not only is the XJ the perfect size, it’s also dirt cheap and super reliable. If you’re still not convinced that the XJ Cherokee isn’t awesome then you just need to go wheel one. They’re so much fun to drive both on and off-road thanks to the torquey 4.0-liter and the lightweight unibody construction.
How much horsepower does a Jeep 4.0 high output have?
The Jeep 4.0L engine is a 4.0L (241.6 ci) 6-cylinder engine. It has a 3.8-inch bore and 3.41-inch stroke with 12 overhead valves. This engine gets an 8.8-to-a compression ratio and produces 190 horsepower at 4600 RPMs and 235 lb-ft. Before you buy any vehicle, you need to know all of the specs and features.
Is a Dana 44 a good axle?
At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling. The Dana 44 is also a heavy axle, but it’s significantly lighter than a Dana 60.
Do I have a Dana 35 or 44?
There are a few things that can help you tell if the axle is a Dana 35 or a Dana 44. The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape.
Do I need longer shocks for a 3 inch lift?