How do I set up email alerts on my IP Camera?
How to set up email alerts on your IP Camera DCS-932L?
- 1 – Click on the SETUP tab and then select on Mail button:
- 2 – Under the “E-MAIL ACCOUNT” section, configure the following:
- 3 – Click on “SAVE SETTINGS”
- 5 – Finally click “SAVE SETTINGS” to save the parameters, and click “Test” from the menu:
How do I setup my Foscam wireless IP Camera?
Option 1: setup via the Foscam app
- Connect your smartphone or tablet to your router’s network.
- Download the Foscam app in the App Store or via Google Play.
- Start the application.
- Create an account via the app.
- Scan the QR code on the camera. The app will than find the camera’s information.
- Follow the steps in the app.
How do I setup an IPP ft camera?
Step 2. Launch IP Camera Client & Change FTP Settings on Your PCs
- FTP Server: Check the IP address of your FTP servers and type it in.
- Username and Password: Enter the right username and password to login to your IP camera FTP servers.
- Directory: Choose an Upload Directory to store CCTV images and videos.
What is security notification push camera?
When motion is detected, you can receive instant IP camera push notifications to your phone as well as email alerts. And the CCTV security camera push notification will also tell you which camera triggers the motion detection so that you can identify effectively and quickly.
What is triggered interval foscam?
Triggered Interval: Do you not want constant notifications when you bring in messages? The interval ensures that a new notification does not take place immediately after every movement. The time you set here is the minimum time between 2 notifications.
What is triggered interval Foscam?
How do you get notifications from security cameras?
- Step 1) Load the app “DMSS” on your phone and click the “…” next to your system.
- Step 2) Select “Notification”
- Step 3) Select the device you want to subscribe to from by tapping the oval, making the bar blue.
- Step 4) Select the type of notification you would like to receive.
- Step 4b) Select motion detection again.
How do I assign a static IP address to my camera?
To assign a static IP address to one camera:
- Locate the camera you want to change from the list.
- Double-click the IP Address field and enter the static IP address. DHCP is automatically disabled for the camera.
- Double-click the Subnet Mask field and the Default Gateway field to enter the required values.
How can I access my IP camera without internet?
Though IP is an abbreviation for Internet Protocol, an IP camera system will work perfectly fine without an internet connection. You can view the cameras, record to a hard drive, and search through recorded footage using just a monitor and a mouse plugged directly into the NVR.
What is motion retrigger time?
Is This Configurable? There is a delay from the end of a motion clip to the start of the camera capturing a new motion clip. This is in place to avoid sending too many motion alerts during expected motion triggers.
What is detection interval?
Configures how often a test packet is sent on a port.
How do I set up alerts on IP Pro?
If you need to set up the IP Pro app, follow the instruction here. From the NVR system go to: ‘System setup > Channel setup > Video detection’. From the video detection, select the camera you want to enable the motion notification. Check the box ‘APP Alarm’ from the bottom to enable the notification.
How to enable motion detection on the camera to send emails?
Double-check if the motion detection is enabled by checking the ” Send Mail Alarm on Email ” box. See the picture below for more details. With such a configuration, the camera can send emails every time a motion is detected according to the motion sensitivity set up on this page.
Why am I not receiving emails from Foscam camera?
If the user is not receiving emails from the Foscam camera, the first thing that needs to be checked is motion detection Let’s check how to perform each one of these steps. Sometimes the message from your camera ends up in the SPAM folder. It’s recommended to check this folder and also the trash.
How do I set up motion detection?
Then press the gear icon at the top right of the screen. Choose the ‘Alert’ option. Now choose ‘Motion Detection’. Motion Detection: This is the general setting to activate motion detection. Schedule: Here you set the days and times at which the motion detection should be on. Sensitivity: You may be notified of every cat passing by.