How do you adjust the tension on a topaz 50?
So out screen touch alt right now you’ve been where you can see your stitches. And how many stitches are for each color touch the alt button and you go to the function for tension.
How do you use a needle threader on Topaz 50?
Then push your left hand down all the way and rotate it to the needle. Then take your right hand lip push it all the way in and then up just a little bit and relax.
How do you wind a bobbin on Topaz 50?
So I’m going to just wind a little bit of thread onto this bobbin. So I’ve got my H up I’m coming up from the inside to the top side of my bobbin. I’m gonna put it up here.
How do you thread a Husqvarna embroidery machine?
Start by placing your thread on the spool pin at the back of the machine. Pull the thread through the metal guide closest to the spool pin.
Why does my Husqvarna sewing machine keep jamming?
Most often, this happens when lint or thread jams up the feed dogs, preventing them from moving. If you clean your machine regularly, this shouldn’t happen! Incorrect threading could also cause the feed dogs to jam and refuse to move, so always try rethreading your machine just in case.
How do you thread a Husqvarna Viking Topaz?
Threading the Viking Designer Topaz – YouTube
How do you thread a Husqvarna Viking sewing machine?
Husqvarna Viking Topaz 40 4 Threading & Machine Set Up
How do you thread a bobbin on a Viking Husqvarna?
Husqvarna Viking Opal 650 04 Inserting a Bobbin – YouTube
How do you wind the bobbin on a Husqvarna?
Husqvarna Viking Topaz 20 7 Winding a Bobbin – YouTube
How do you thread a Husqvarna Viking machine?
How do you use a Husqvarna Topaz 50 embroidery machine?
Husqvarna Viking Topaz 50 61 How to Load an Embroidery Design
Why is my thread bunching up on the bottom?
Your Bobbin Is Not Inserted Correctly
If you are getting bobbin thread bunching under your fabric, your bobbin might be inserted backward. Some sewing machines require your thread to go clockwise in your bobbin case, and some require it to go counterclockwise.
Why does my sewing machine thread bunch up underneath?
Sewing Machine Problem: Thread Bunching Under Fabric – YouTube
How do you thread a Husqvarna Viking Sapphire?
Husqvarna Viking Sapphire 930 04 Threading & Machine Set Up
How do you thread a Husqvarna Viking e10 sewing machine?
Viking E 10 02 Machine Set Up – YouTube
How do you thread a Husqvarna Viking Rose sewing machine?
Husqvarna Viking Rose Sewing Embroidery Machine Basic Course
How do I thread a Husqvarna Viking sewing machine?
How do you wind a bobbin on a Husqvarna Viking Diamond sewing machine?
Winding the Bobbin and Threading the Husqvarna Designer SE
How do you thread a bobbin?
How to Thread a Bobbin – YouTube
How do you thread a Viking automatic sewing machine?
Husqvarna Viking 19e Vintage Sewing Machine – YouTube
What tension should I use on my sewing machine?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics.
How tight should bobbin tension?
Swiftly pull up on the thread. The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Why is the thread looping under my fabric?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do you thread a double needle Husqvarna?
Husqvarna Viking Opal 690 51 Twin Needle Threading & Set Up
How do you thread a bobbin on a Husqvarna Viking?
Husqvarna Viking Emerald 116 Threading & Winding a Bobbin