How long do injectors last on a 6.0 Powerstroke?

How long do injectors last on a 6.0 Powerstroke?

With proper care and maintenance of the engine, you can expect a diesel injector to last between 200,000 and 300,000 kilometres.

What are the best 6.0 Powerstroke injectors?

Our Recommendations On Best Injectors for 6.0 Powerstroke:

  • Ford 4C3Z-9E527-BRM.
  • Motorcraft CN5019RM.
  • DCP Fuel Injector.
  • Quality Remanufactured Injector.
  • BuyAutoParts 35-00875IR.

Why do 6.0 Powerstroke injectors fail?

Out. It’s generally spool valve does start to fail and solenoids before anything. So a lot of times when those start to fail you’ll notice a hard start when first thing in the morning when the engine

What kind of injectors are in a 6.0 Powerstroke?

The Powerstroke 7.3 and 6.0 use Hydraulically actuated Electronically controlled Unit Injectors (HEUI).

Is it easy to change diesel injectors?

It’s just as easy to remove, just do it carefully. With the fuel delivery out of the way, you’re ready to disconnect the fuel injectors. Each injector will have a plug at the top (or on the side near the top) that connects to the wiring harness.

How do you check injectors on a 6.0 Powerstroke?

Powerstroke 6.0L AutoEnginuity Injector Testing – YouTube

Are 7.3 and 6.0 injectors the same?

The primary difference between 7.3L and 6.0L injectors is the valve that allows high-pressure oil to enter them. On a 7.3L, it’s a poppet valve (as shown in the diagram above). On a 6.0L, it’s called a spool valve.

How do 6.0 Powerstroke injectors work?

Ford 6.0 powerstroke injectors | What you need to know – YouTube

How much does it cost to replace the injectors in a 6.0 diesel?

The price to replace the injectors on a 6.0 Powerstroke may cost anywhere from $250-$700 for one injector, or anywhere from $950 to as much as $4,000 or more to replace all eight.

How Much Does it Cost to Replace 6.0 Powerstroke Injectors?

Per Injector All 8 Injectors
Average Cost Estimate $550-$700 $950-$2,750

How do you check injectors on a 6.0 PowerStroke?

How do you test a 6.0 diesel injector?

What size are stock 6.0 Powerstroke injectors?

Description. 6.0L Ford Powerstroke Injector Set: 175cc with a 30 percent over nozzle. Approximately 90 RWHP increase over stock. Largest size for stock turbo, not recommended for heavy towing on stock turbo.

How do I know if my diesel injectors are faulty?


  1. Trouble starting the vehicle or uneven idling. The engine cranks but doesn’t start unless you crank it for a long time.
  2. Misfire.
  3. Smell of fuel.
  4. Dirty emissions.
  5. Increased fuel consumption and poor miles per gallon.

What mileage should diesel injectors be replaced?

every 95,000 miles

On average, diesel fuel injectors should be replaced every 95,000 miles. Of course, several factors go into play such as operating conditions, the load being put on the engine, and the quality of fuel used.

How do you change the injectors on a 6.0 Diesel?

6.0 powerstroke injector replacement – YouTube

How do you take the injectors out of a 6.0 Powerstroke?


How do you tell if a Ford 6.0 has been bulletproofed?

How To Check for a Studded Engine | Bulletproofed 6.0 Powerstroke

What does it mean when a 6.0 is Bulletproofed?

The fine folks at BulletProof Diesel define 6.0L Power Stroke as being “bulletproofed” when it has at least four of the five main problem areas addressed. These five areas are: Oil cooler, EGR cooler, head studs, fuel injection control module (FICM), and water pump.

Why does my 6.0 Powerstroke smoke when I start it?

Your 6.0 Powerstroke creating white smoke on startup indicates potential unburned fuel due to stiction, which is sticky residue. If your injector has stiction inside, this may result in an issue where your engine’s combustion temperatures are too low to burn off your fuel, causing white smoke.

How often do diesel injectors need to be replaced?

On average, diesel fuel injectors should be replaced every 95,000 miles. Of course, several factors go into play such as operating conditions, the load being put on the engine, and the quality of fuel used.

How long does it take to replace fuel injectors?

two hours
It depends on a few factors, including the make and model of your vehicle, the severity of the damage to the injector, and the experience of the mechanic. In most cases, it should take no more than two hours to replace a fuel injector.

Will bigger injectors hurt mpg?

In the end, do not upgrade to larger injectors in an attempt to get better fuel mileage, as new stock sized injectors will do the job if your current injectors are worn out. But at the same time, if you are looking for more power, do not be afraid to go to a larger injector because of losing fuel economy.

What are signs of a clogged fuel injector?

Five Signs Your Fuel Injectors Are Clogged or Bad

  • Bumpy Idling. Rough idling is a sign that your automobile’s engine is not getting enough gasoline, and one reason why it might not be getting enough gas is that your fuel injectors are clogged.
  • Dancing RPM Needle.
  • Dead Engine.
  • Low Gas Mileage.
  • Misfiring Engine.

Should you replace all fuel injectors at once?

Unless you need to fix other things that may be causing your fuel injector to fail (which is usually the case), replacing only one will do little good and cost time and money. If the car is old and you have the budget, replacing all of them can help you avoid future problems.

Is it better to clean fuel injectors or replace?

Injector Replacement or Injector Cleaning? Fuel injectors should be cleaned at least once every 36 months, or 45,000 miles. Replacing weak or worn-out engine parts without improving performance is not a good idea in general. However, cleaning out dirty injectors may gain a different perspective on engine health.

Related Post