How many years does an AO Smith water heater last?
between 6 to 10 years
Smith tank water heaters have a limited warranty lasting between 6 to 10 years, it is not uncommon to find water heaters that are still properly functioning well over a decade or more. When properly installed and maintained in locations with good water quality and pressure, A. O.
How do you tell how old a AO Smith water heater is?
This can be determined by looking at the first four numbers, ignoring any letter that may start the serial number. The first two numbers represent the year the heater was built. If your heater was built before 2008, the next two numbers represent the month.
Where is the anode rod located on a AO Smith water heater?
The anode rod in your A.O. Smith brand water heater is located on top of your tank. When you are facing the front of your water heater, the sacrificial magnesium or aluminum anode is located at the back, between the cold and hot water connections.
How much is a 50 hot water heater?
A 50-gallon water heater costs around $1,000 for an electric heater and $1,200 for a natural gas heater of the same capacity.
Should I replace my 20 year old water heater?
A professional can sometimes repair these issues, but if your water heater is older, you’ll need replacement. For example, a 20-year-old water heater is nearing the end of its service life and will need to be replaced even if repairs are possible.
What are the signs your hot water heater is going out?
Rust deposits or a metallic odor coming out with hot water can signal either rusty pipes or rust inside the water heater. If corrosion is eating away the metal from the inside, leaks are inevitable. Murky water from the tap can also be signs that the water heater will fail soon.
Can you tell how old a water heater is by the serial number?
The year of manufacture is noted by the first letter of the serial number, and the month is the second letter. Is your water heater’s brand not listed above? If your water heater’s brand isn’t listed, check NACHI’s or The Water Heater Hub’s serial decoder to learn more.
How many years does a water heater last?
between eight and ten years
How Long Do Water Heaters Last. — The majority of water heaters last between eight and ten years. While ten is the age at which heater replacement is generally recommended, the actual need to replace a heater could arise before or after this timeline.
Do all A.O. Smith water heaters have anode rods?
Built into all A. O. Smith glass-lined tank water heaters will be an anode rod to protect the tank and extend its life.
Can I replace anode rod myself?
You can replace the anode, but it’s not easy. Most tanks are located somewhere without enough headroom to easily remove the old rod or insert a new one. To begin the process, turn off the electricity (or gas) to the heater, shut its water supply, and open a hot-water faucet to relieve pressure inside the appliance.
What is the labor cost to install a water heater?
Plumbers can perform most of the work of installing gas or electric water heaters. Their labor rates range between $45 and $150 per hour. If the job includes major electrical work, such as adding a new circuit or converting from gas to electric, you’ll also need to hire an electrician at $50 to $100 per hour.
How much should it cost to install a 50-gallon hot water heater?
The national average cost to replace a 50-gallon hot water heater is $1,100 to $2,800, with most people paying around $1,800 for a direct replacement of a 50-gallon gas hot water heater using the same model.
Is flushing your water heater necessary?
It is recommended that you flush your water heater at least once per year. Doing so will help to prevent the potential problems that sediment can bring over time.
Should you replace your water heater before it breaks?
Unless you replace this rod every few years, your water heater could begin taking a beating. If the tank rusts through, it could fail catastrophically and flood your home. You can avoid this disaster by replacing your water heater before it fails.
How old is my water heater by model number?
On older models, you can determine the age of your unit by decoding the water heater serial number. Some manufacturers, including Rheem, made it easy by incorporating the month and year built into the first 4 digits of the serial number.
How do you tell what year your water heater was made?
Check for a manufacturer label on the side of your water heater — this should include the installation date. If the label is missing, or the installation date is not listed, you can use the serial number to determine the age of your unit.
Which is better magnesium or aluminum anode rod?
However, aluminum rods are the better choice for a water heater that heats up sulfate-tinged water. Sacrificial anodes change sulfates into hydrogen sulfides. When a magnesium anode rod is used, the level of hydrogen sulfide can get too high and cause a rotten-egg stench in your hot water.
How often should you replace anode rod?
every 3-5 years
By replacing your anode rod every 3-5 years, your water heater can last well over 20 years without any risk of leaks and resulting water damage. Unfortunately, if you ignore this important water heater maintenance task, you may need to replace the entire water heater after only 10 years of use.
Do you have to drain water heater to replace anode rod?
Note: If your anode rod is on the top of the heater, you will only need to allow the tank to drain about a quart or 1/2 a gallon of water. If the anode is located on the side, drain the tank until the water is below the anode rod port. Then close the outlet and remove the hose.
Should you use Teflon tape on anode rod?
Teflon tape is safe to use on anode rods to establish a watertight seal, some manufacturers even recommend it. It should not interfere significantly with the electrical contact between rod and tank.
Can I replace water heater myself?
Do not attempt installing a gas water heater yourself unless you’re experienced and comfortable with soldering, working with natural gas and following local installation codes. Save yourself the hassle with our gas water heater installation services which include removal of the old water heater.
How long does it take to put in a new water heater?
two to three hours
Tank to Tank installation: On average, replacing a gas or electric water tank with a similar model takes two to three hours. It takes between 45 to 60 minutes to drain, disconnect and remove your old water heater.
How long will a 50-gallon hot water heater last?
12 years
In general, 40-gallon heaters last for about eight years, while 50-gallon heaters can last 12 years. This is because 50-gallon heaters have thicker tanks. As a result, they are less likely to develop leaks. A 50-gallon water heater will last about 8 to 20 years, which is longer than most water heaters.
What happens if you never flush water heater?
If not regularly flushed, your water heater can corrode more quickly. The sediment can also block or clog the pressure and relief valve (which helps keep your water heater from exploding).
How much should a water heater flush cost?
between $80 and $100
What does it cost to flush a water heater? The cost of flushing a water heater can vary quite a lot depending on the area, the quality of the plumber, and the type of water heater. Generally, for most standard water heaters, a flush will cost between $80 and $100.